lkml.org 
[lkml]   [2013]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/14] reform the ABx500 IRQ handling
Date
From: Linus Walleij <linus.walleij@linaro.org>

The AB8500/ABx500 PMIC ASICs have a real interesting way
of handling GPIO interrupts. They can trigger both on rising
and falling edge but will fire two different physical hwirqs
for rising resp. falling edge.

The complexity was kept in the abx500 pinctrl driver by
heritage from the ab8500 GPIO driver. That one was however
severely broken and this was part of the brokenness.

This series tries to decrease the complexity by moving
the interrupt handling back into the AB8500 core and
letting the ABx500 pinctrl driver rely on the irqdomain
stored inside the mfd device.

The basic design problem with the old driver was that it
was modeling a *cascading* interrupt controller off the
AB8500 core, whereas what we want is actually a *merging*
interrupt controller, that will take two physical hwirqs
and associate them with *one* Linux IRQ.

The right place to handle this is in the AB8500 core.

Lee Jones (13):
mfd: ab8500: prepare to handle AB8500 GPIO's IRQs correctly
mfd: ab8500: provide a irq_set_type() function
mfd: ab8500: ensure new AB8500 pinctrl driver is probed correctly
mfd: ab8500: allow AB9540 based devices to use ABX500 pinctrl
pinctrl/abx500: prevent error path from corrupting returning error
pinctrl/abx500: align GPIO cluster boundaries
pinctrl/abx500: move IRQ handling to ab8500-core
pinctrl/abx500: replace IRQ offsets with table read-in values
pinctrl/abx500: add Device Tree support
ARM: ux500: remove irq_base property from platform_data
ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
ARM: ux500: enable AB8500 GPIO for HREF
ARM: ux500: allow Snowball access to the AB8500 GPIO pins

Linus Walleij (1):
pinctrl/abx500: use direct IRQ defines

arch/arm/boot/dts/hrefprev60.dts | 8 +
arch/arm/boot/dts/snowball.dts | 4 +
arch/arm/mach-ux500/board-mop500.c | 1 -
.../mach-ux500/include/mach/irqs-board-mop500.h | 10 +-
drivers/mfd/ab8500-core.c | 37 ++-
drivers/pinctrl/pinctrl-ab8500.c | 6 +-
drivers/pinctrl/pinctrl-ab8505.c | 10 +-
drivers/pinctrl/pinctrl-ab8540.c | 5 +-
drivers/pinctrl/pinctrl-ab9540.c | 8 +-
drivers/pinctrl/pinctrl-abx500.c | 365 +++------------------
drivers/pinctrl/pinctrl-abx500.h | 10 +-
include/linux/mfd/abx500/ab8500-gpio.h | 1 -
12 files changed, 120 insertions(+), 345 deletions(-)

--
1.7.11.3



\
 
 \ /
  Last update: 2013-02-05 21:21    [W:0.191 / U:23.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site