lkml.org 
[lkml]   [2013]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] cpufreq: Retrieve current frequency from scaling drivers with internal governors
Date
From: Dirk Brandewie <dirk.brandewie@gmail.com>

Scaling drivers that implement the cpufreq_driver.setpolicy() versus
the cpufreq_driver.target() interface do not set policy->cur.

Normally policy->cur is set during the call to cpufreq_driver.target()
when the frequnecy request is made by the governor.

If the scaling driver implements cpufreq_driver.setpolicy() and
cpufreq_driver.get() interfaces use cpufreq_driver.get() to retrieve
the current frequency.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
From: Dirk Brandewie <dirk.brandewie@gmail.com>
Date: 2013-02-04 18:44:40 -0800

cpufreq: balance out cpufreq_cpu_{get,put} for scaling drivers using setpolicy

There is an additional reference added to the driver in
cpufreq_add_dev() that is removed in__cpufreq_governor() if the
driver implements target(). Remove the last reference when the
driver implements setpolicy()

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
---
drivers/cpufreq/cpufreq.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2817c3c..96bc302 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1181,6 +1181,13 @@ unsigned int cpufreq_quick_get(unsigned int cpu)
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
unsigned int ret_freq = 0;

+ if (cpufreq_driver && cpufreq_driver->setpolicy &&
+ cpufreq_driver->get) {
+ ret_freq = cpufreq_driver->get(cpu);
+ cpufreq_cpu_put(policy);
+ return ret_freq;
+ }
+
if (policy) {
ret_freq = policy->cur;
cpufreq_cpu_put(policy);
--
1.7.7.6


\
 
 \ /
  Last update: 2013-02-05 19:41    [W:0.197 / U:3.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site