[lkml]   [2013]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/2] ARM: Exynos5250: Enabling samsung usb phy
Based on for-next of 'linux-samsung' tree.

Aligned with following patches for separate PHY drivers for USB 2.0 and
USB 3.0 for Samsung SoCs.
[PATCH v5 1/2] usb: phy: samsung: Common out the generic stuff
[PATCH v5 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller

Changes from v2:
- Putting device nodes in order of device addresses.

Changes from v1:
- Putting separate device nodes for usb 2.0 phy and usb 3.0 phy
based on separate driver for samsung usb 3.0 phy and
samsung usb 2.0 phy:
[PATCH v3 0/2] Adding USB 3.0 DRD-phy support for exynos5250
[PATCH v8 0/4] Adding usb2.0 host-phy support for exynos5250
- Aligning as per the patch:
usb: phy: samsung: Add support to set pmu isolation
- Replaced phy-handle approach for PHY CONTROL registers
to child nodes.
- Removing AUX data entry from exynos5250 dt file.

Vivek Gautam (2):
ARM: Exynos5250: Enabling samsung-usb2phy driver
ARM: Exynos5250: Enabling samsung-usb3phy driver

arch/arm/boot/dts/exynos5250.dtsi | 25 +++++++++++++++++++++++++
1 files changed, 25 insertions(+), 0 deletions(-)


 \ /
  Last update: 2013-02-05 14:43    [W:0.040 / U:3.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site