lkml.org 
[lkml]   [2013]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/2] usb: phy: samsung: Common out the generic stuff
Date
Moving register and structure definitions to header file,
and keeping the generic functions to be used across
multiple PHYs in common phy helper driver under SAMSUNG_USBPHY,
and moving USB 2.0 PHY driver under SAMSUNG_USB2PHY.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
---
drivers/usb/phy/Kconfig | 17 +-
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/samsung-usb2phy.c | 511 ++++++++++++++++++++++++++
drivers/usb/phy/samsung-usbphy.c | 717 +------------------------------------
drivers/usb/phy/samsung-usbphy.h | 247 +++++++++++++
5 files changed, 780 insertions(+), 713 deletions(-)
create mode 100644 drivers/usb/phy/samsung-usb2phy.c
create mode 100644 drivers/usb/phy/samsung-usbphy.h

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 65217a5..b28878d 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -66,10 +66,17 @@ config USB_RCAR_PHY
To compile this driver as a module, choose M here: the
module will be called rcar-phy.

-config SAMSUNG_USBPHY
- bool "Samsung USB PHY controller Driver"
- depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
+config SAMSUNG_USB2PHY
+ bool "Samsung USB 2.0 PHY controller Driver"
+ select SAMSUNG_USBPHY
select USB_OTG_UTILS
help
- Enable this to support Samsung USB phy controller for samsung
- SoCs.
+ Enable this to support Samsung USB 2.0 (High Speed) PHY controller
+ driver for Samsung SoCs.
+
+config SAMSUNG_USBPHY
+ bool "Samsung USB PHY Driver"
+ help
+ Enable this to support Samsung USB phy helper driver for Samsung SoCs.
+ This driver provides common interface to interact, for Samsung USB 2.0 PHY
+ driver and later for Samsung USB 3.0 PHY driver.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa1..1efa174 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
+obj-$(CONFIG_SAMSUNG_USB2PHY) += samsung-usb2phy.o
diff --git a/drivers/usb/phy/samsung-usb2phy.c b/drivers/usb/phy/samsung-usb2phy.c
new file mode 100644
index 0000000..55ac3a8
--- /dev/null
+++ b/drivers/usb/phy/samsung-usb2phy.c
@@ -0,0 +1,511 @@
+/* linux/drivers/usb/phy/samsung-usb2phy.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
+ * OHCI-EXYNOS controllers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "samsung-usbphy.h"
+
+int samsung_usb2phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ if (!otg)
+ return -ENODEV;
+
+ if (!otg->host)
+ otg->host = host;
+
+ return 0;
+}
+
+static bool exynos5_phyhost_is_on(void *regs)
+{
+ u32 reg;
+
+ reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ return !(reg & HOST_CTRL0_SIDDQ);
+}
+
+static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyclk = sphy->ref_clk_freq;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+ u32 ehcictrl;
+ u32 ohcictrl;
+
+ /*
+ * phy_usage helps in keeping usage count for phy
+ * so that the first consumer enabling the phy is also
+ * the last consumer to disable it.
+ */
+
+ atomic_inc(&sphy->phy_usage);
+
+ if (exynos5_phyhost_is_on(regs)) {
+ dev_info(sphy->dev, "Already power on PHY\n");
+ return;
+ }
+
+ /* Host configuration */
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* phy reference clock configuration */
+ phyhost &= ~HOST_CTRL0_FSEL_MASK;
+ phyhost |= HOST_CTRL0_FSEL(phyclk);
+
+ /* host phy reset */
+ phyhost &= ~(HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ /* Enable normal mode of operation */
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+
+ /* Link reset */
+ phyhost |= (HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST |
+ /* COMMON Block configuration during suspend */
+ HOST_CTRL0_COMMONON_N);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+ udelay(10);
+ phyhost &= ~(HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* OTG configuration */
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* phy reference clock configuration */
+ phyotg &= ~OTG_SYS_FSEL_MASK;
+ phyotg |= OTG_SYS_FSEL(phyclk);
+
+ /* Enable normal mode of operation */
+ phyotg &= ~(OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP |
+ OTG_SYS_REFCLKSEL_MASK |
+ /* COMMON Block configuration during suspend */
+ OTG_SYS_COMMON_ON);
+
+ /* OTG phy & link reset */
+ phyotg |= (OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET |
+ OTG_SYS_OTGDISABLE |
+ /* Set phy refclk */
+ OTG_SYS_REFCLKSEL_CLKCORE);
+
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+ udelay(10);
+ phyotg &= ~(OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* HSIC phy configuration */
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_PHYSWRST);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+ udelay(10);
+ phyhsic &= ~HSIC_CTRL_PHYSWRST;
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ udelay(80);
+
+ /* enable EHCI DMA burst */
+ ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
+ ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
+ HOST_EHCICTRL_ENAINCR4 |
+ HOST_EHCICTRL_ENAINCR8 |
+ HOST_EHCICTRL_ENAINCR16);
+ writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
+
+ /* set ohci_suspend_on_n */
+ ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
+ ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
+ writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
+}
+
+static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phypwr;
+ u32 phyclk;
+ u32 rstcon;
+
+ /* set clock frequency for PLL */
+ phyclk = sphy->ref_clk_freq;
+ phypwr = readl(regs + SAMSUNG_PHYPWR);
+ rstcon = readl(regs + SAMSUNG_RSTCON);
+
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_S3C64XX:
+ phyclk &= ~PHYCLK_COMMON_ON_N;
+ phypwr &= ~PHYPWR_NORMAL_MASK;
+ rstcon |= RSTCON_SWRST;
+ break;
+ case TYPE_EXYNOS4210:
+ phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
+ rstcon |= RSTCON_SWRST;
+ default:
+ break;
+ }
+
+ writel(phyclk, regs + SAMSUNG_PHYCLK);
+ /* Configure PHY0 for normal operation*/
+ writel(phypwr, regs + SAMSUNG_PHYPWR);
+ /* reset all ports of PHY and Link */
+ writel(rstcon, regs + SAMSUNG_RSTCON);
+ udelay(10);
+ rstcon &= ~RSTCON_SWRST;
+ writel(rstcon, regs + SAMSUNG_RSTCON);
+}
+
+static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+
+ if (atomic_dec_return(&sphy->phy_usage) > 0) {
+ dev_info(sphy->dev, "still being used\n");
+ return;
+ }
+
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_SIDDQ |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_FORCESUSPEND);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+ phyhost |= (HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP |
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+ phyotg |= (OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+}
+
+static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phypwr;
+
+ phypwr = readl(regs + SAMSUNG_PHYPWR);
+
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_S3C64XX:
+ phypwr |= PHYPWR_NORMAL_MASK;
+ break;
+ case TYPE_EXYNOS4210:
+ phypwr |= PHYPWR_NORMAL_MASK_PHY0;
+ default:
+ break;
+ }
+
+ /* Disable analog and otg block power */
+ writel(phypwr, regs + SAMSUNG_PHYPWR);
+}
+
+/*
+ * The function passed to the usb driver for phy initialization
+ */
+static int samsung_usb2phy_init(struct usb_phy *phy)
+{
+ struct samsung_usbphy *sphy;
+ struct usb_bus *host = NULL;
+ unsigned long flags;
+ int ret = 0;
+
+ sphy = phy_to_sphy(phy);
+
+ host = phy->otg->host;
+
+ /* Enable the phy clock */
+ ret = clk_prepare_enable(sphy->clk);
+ if (ret) {
+ dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+ return ret;
+ }
+
+ spin_lock_irqsave(&sphy->lock, flags);
+
+ if (host) {
+ /* setting default phy-type for USB 2.0 */
+ if (!strstr(dev_name(host->controller), "ehci") ||
+ !strstr(dev_name(host->controller), "ohci"))
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+ } else {
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+ }
+
+ /* Disable phy isolation */
+ if (sphy->plat && sphy->plat->pmu_isolation)
+ sphy->plat->pmu_isolation(false);
+ else
+ samsung_usbphy_set_isolation(sphy, false);
+
+ /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
+ samsung_usbphy_cfg_sel(sphy);
+
+ /* Initialize usb phy registers */
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usb2phy_enable(sphy);
+ else
+ samsung_usb2phy_enable(sphy);
+
+ spin_unlock_irqrestore(&sphy->lock, flags);
+
+ /* Disable the phy clock */
+ clk_disable_unprepare(sphy->clk);
+
+ return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usb2phy_shutdown(struct usb_phy *phy)
+{
+ struct samsung_usbphy *sphy;
+ struct usb_bus *host = NULL;
+ unsigned long flags;
+
+ sphy = phy_to_sphy(phy);
+
+ host = phy->otg->host;
+
+ if (clk_prepare_enable(sphy->clk)) {
+ dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+ return;
+ }
+
+ spin_lock_irqsave(&sphy->lock, flags);
+
+ if (host) {
+ /* setting default phy-type for USB 2.0 */
+ if (!strstr(dev_name(host->controller), "ehci") ||
+ !strstr(dev_name(host->controller), "ohci"))
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+ } else {
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+ }
+
+ /* De-initialize usb phy registers */
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usb2phy_disable(sphy);
+ else
+ samsung_usb2phy_disable(sphy);
+
+ /* Enable phy isolation */
+ if (sphy->plat && sphy->plat->pmu_isolation)
+ sphy->plat->pmu_isolation(true);
+ else
+ samsung_usbphy_set_isolation(sphy, true);
+
+ spin_unlock_irqrestore(&sphy->lock, flags);
+
+ clk_disable_unprepare(sphy->clk);
+}
+
+static int samsung_usb2phy_probe(struct platform_device *pdev)
+{
+ struct samsung_usbphy *sphy;
+ struct usb_otg *otg;
+ struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+ const struct samsung_usbphy_drvdata *drv_data;
+ struct device *dev = &pdev->dev;
+ struct resource *phy_mem;
+ void __iomem *phy_base;
+ struct clk *clk;
+ int ret;
+
+ phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!phy_mem) {
+ dev_err(dev, "%s: missing mem resource\n", __func__);
+ return -ENODEV;
+ }
+
+ phy_base = devm_request_and_ioremap(dev, phy_mem);
+ if (!phy_base) {
+ dev_err(dev, "%s: register mapping failed\n", __func__);
+ return -ENXIO;
+ }
+
+ sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+ if (!sphy)
+ return -ENOMEM;
+
+ otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ drv_data = samsung_usbphy_get_driver_data(pdev);
+
+ if (drv_data->cpu_type == TYPE_EXYNOS5250)
+ clk = devm_clk_get(dev, "usbhost");
+ else
+ clk = devm_clk_get(dev, "otg");
+
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Failed to get otg clock\n");
+ return PTR_ERR(clk);
+ }
+
+ sphy->dev = dev;
+
+ if (dev->of_node) {
+ ret = samsung_usbphy_parse_dt(sphy);
+ if (ret < 0)
+ return ret;
+ } else {
+ if (!pdata) {
+ dev_err(dev, "no platform data specified\n");
+ return -EINVAL;
+ }
+ }
+
+ sphy->plat = pdata;
+ sphy->regs = phy_base;
+ sphy->clk = clk;
+ sphy->drv_data = drv_data;
+ sphy->phy.dev = sphy->dev;
+ sphy->phy.label = "samsung-usb2phy";
+ sphy->phy.init = samsung_usb2phy_init;
+ sphy->phy.shutdown = samsung_usb2phy_shutdown;
+ sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+
+ sphy->phy.otg = otg;
+ sphy->phy.otg->phy = &sphy->phy;
+ sphy->phy.otg->set_host = samsung_usb2phy_set_host;
+
+ spin_lock_init(&sphy->lock);
+
+ platform_set_drvdata(pdev, sphy);
+
+ return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+}
+
+static int samsung_usb2phy_remove(struct platform_device *pdev)
+{
+ struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&sphy->phy);
+
+ if (sphy->pmuregs)
+ iounmap(sphy->pmuregs);
+ if (sphy->sysreg)
+ iounmap(sphy->sysreg);
+
+ return 0;
+}
+
+static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
+ .cpu_type = TYPE_S3C64XX,
+ .devphy_en_mask = S3C64XX_USBPHY_ENABLE,
+};
+
+static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
+ .cpu_type = TYPE_EXYNOS4210,
+ .devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+};
+
+static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
+ .cpu_type = TYPE_EXYNOS5250,
+ .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+ {
+ .compatible = "samsung,s3c64xx-usb2phy",
+ .data = &usb2phy_s3c64xx,
+ }, {
+ .compatible = "samsung,exynos4210-usb2phy",
+ .data = &usb2phy_exynos4,
+ }, {
+ .compatible = "samsung,exynos5250-usb2phy",
+ .data = &usb2phy_exynos5
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+ {
+ .name = "s3c64xx-usb2phy",
+ .driver_data = (unsigned long)&usb2phy_s3c64xx,
+ }, {
+ .name = "exynos4210-usb2phy",
+ .driver_data = (unsigned long)&usb2phy_exynos4,
+ }, {
+ .name = "exynos5250-usb2phy",
+ .driver_data = (unsigned long)&usb2phy_exynos5,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usb2phy_driver = {
+ .probe = samsung_usb2phy_probe,
+ .remove = samsung_usb2phy_remove,
+ .id_table = samsung_usbphy_driver_ids,
+ .driver = {
+ .name = "samsung-usb2phy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(samsung_usbphy_dt_match),
+ },
+};
+
+module_platform_driver(samsung_usb2phy_driver);
+
+MODULE_DESCRIPTION("Samsung USB 2.0 phy controller");
+MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usb2phy");
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
index 6ea5537..4fb03dc 100644
--- a/drivers/usb/phy/samsung-usbphy.c
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -5,8 +5,9 @@
*
* Author: Praveen Paneri <p.paneri@samsung.com>
*
- * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
- * OHCI-EXYNOS controllers.
+ * Samsung USB-PHY helper driver with common function calls;
+ * interacts with Samsung USB 2.0 PHY controller driver and later
+ * with Samsung USB 3.0 PHY driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,233 +22,16 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/usb/otg.h>
#include <linux/usb/samsung_usb_phy.h>
-#include <linux/platform_data/samsung-usbphy.h>

-/* Register definitions */
+#include "samsung-usbphy.h"

-#define SAMSUNG_PHYPWR (0x00)
-
-#define PHYPWR_NORMAL_MASK (0x19 << 0)
-#define PHYPWR_OTG_DISABLE (0x1 << 4)
-#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
-#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
-/* For Exynos4 */
-#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
-#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
-
-#define SAMSUNG_PHYCLK (0x04)
-
-#define PHYCLK_MODE_USB11 (0x1 << 6)
-#define PHYCLK_EXT_OSC (0x1 << 5)
-#define PHYCLK_COMMON_ON_N (0x1 << 4)
-#define PHYCLK_ID_PULL (0x1 << 2)
-#define PHYCLK_CLKSEL_MASK (0x3 << 0)
-#define PHYCLK_CLKSEL_48M (0x0 << 0)
-#define PHYCLK_CLKSEL_12M (0x2 << 0)
-#define PHYCLK_CLKSEL_24M (0x3 << 0)
-
-#define SAMSUNG_RSTCON (0x08)
-
-#define RSTCON_PHYLINK_SWRST (0x1 << 2)
-#define RSTCON_HLINK_SWRST (0x1 << 1)
-#define RSTCON_SWRST (0x1 << 0)
-
-/* EXYNOS5 */
-#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
-
-#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
-
-#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
-#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
-#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
-#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
-
-#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
-#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
-
-#define FSEL_CLKSEL_50M (0x7)
-#define FSEL_CLKSEL_24M (0x5)
-#define FSEL_CLKSEL_20M (0x4)
-#define FSEL_CLKSEL_19200K (0x3)
-#define FSEL_CLKSEL_12M (0x2)
-#define FSEL_CLKSEL_10M (0x1)
-#define FSEL_CLKSEL_9600K (0x0)
-
-#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
-#define HOST_CTRL0_RETENABLE (0x1 << 10)
-#define HOST_CTRL0_COMMONON_N (0x1 << 9)
-#define HOST_CTRL0_SIDDQ (0x1 << 6)
-#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
-#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
-#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
-#define HOST_CTRL0_UTMISWRST (0x1 << 2)
-#define HOST_CTRL0_LINKSWRST (0x1 << 1)
-#define HOST_CTRL0_PHYSWRST (0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
-
-#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
-
-#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
-
-#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
-
-#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
-
-#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
-#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
-
-#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
-#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
-#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
-#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
-#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
-#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
-#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
-
-#define HSIC_CTRL_SIDDQ (0x1 << 6)
-#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
-#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
-#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
-#define HSIC_CTRL_UTMISWRST (0x1 << 2)
-#define HSIC_CTRL_PHYSWRST (0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
-
-#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
-#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
-#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
-#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
-
-#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
-
-#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
-#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
-#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
-#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_SYS (0x38)
-
-#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
-#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
-#define OTG_SYS_PHY0_SWRST (0x1 << 12)
-
-#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
-#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
-#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
-#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
-
-#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
-#define OTG_SYS_COMMON_ON (0x1 << 7)
-
-#define OTG_SYS_FSEL_MASK (0x7 << 4)
-#define OTG_SYS_FSEL(_x) ((_x) << 4)
-
-#define OTG_SYS_FORCESLEEP (0x1 << 3)
-#define OTG_SYS_OTGDISABLE (0x1 << 2)
-#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
-#define OTG_SYS_FORCESUSPEND (0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_TUNE (0x40)
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
-#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
-#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
-#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
-#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
-
-enum samsung_cpu_type {
- TYPE_S3C64XX,
- TYPE_EXYNOS4210,
- TYPE_EXYNOS5250,
-};
-
-/*
- * struct samsung_usbphy_drvdata - driver data for various SoC variants
- * @cpu_type: machine identifier
- * @devphy_en_mask: device phy enable mask for PHY CONTROL register
- * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
- * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
- * mapped address of system controller.
- * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
- * mapped address of system controller.
- *
- * Here we have a separate mask for device type phy.
- * Having different masks for host and device type phy helps
- * in setting independent masks in case of SoCs like S5PV210,
- * in which PHY0 and PHY1 enable bits belong to same register
- * placed at position 0 and 1 respectively.
- * Although for newer SoCs like exynos these bits belong to
- * different registers altogether placed at position 0.
- */
-struct samsung_usbphy_drvdata {
- int cpu_type;
- int devphy_en_mask;
- int hostphy_en_mask;
- u32 devphy_reg_offset;
- u32 hostphy_reg_offset;
-};
-
-/*
- * struct samsung_usbphy - transceiver driver state
- * @phy: transceiver structure
- * @plat: platform data
- * @dev: The parent device supplied to the probe function
- * @clk: usb phy clock
- * @regs: usb phy controller registers memory base
- * @pmuregs: USB device PHY_CONTROL register memory base
- * @sysreg: USB2.0 PHY_CFG register memory base
- * @ref_clk_freq: reference clock frequency selection
- * @drv_data: driver data available for different SoCs
- * @phy_type: Samsung SoCs specific phy types: #HOST
- * #DEVICE
- * @phy_usage: usage count for phy
- * @lock: lock for phy operations
- */
-struct samsung_usbphy {
- struct usb_phy phy;
- struct samsung_usbphy_data *plat;
- struct device *dev;
- struct clk *clk;
- void __iomem *regs;
- void __iomem *pmuregs;
- void __iomem *sysreg;
- int ref_clk_freq;
- const struct samsung_usbphy_drvdata *drv_data;
- enum samsung_usb_phy_type phy_type;
- atomic_t phy_usage;
- spinlock_t lock;
-};
-
-#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
-
-int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
- if (!otg)
- return -ENODEV;
-
- if (!otg->host)
- otg->host = host;
-
- return 0;
-}
-
-static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
+int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
{
struct device_node *usbphy_sys;

@@ -288,7 +72,7 @@ err0:
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
-static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
+void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
@@ -340,7 +124,7 @@ static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
*/
-static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
+void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
{
u32 reg;

@@ -364,7 +148,7 @@ static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
* This make sure that correct PHY type is selected before
* any operation on PHY.
*/
-static int samsung_usbphy_set_type(struct usb_phy *phy,
+int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type)
{
struct samsung_usbphy *sphy = phy_to_sphy(phy);
@@ -377,7 +161,7 @@ static int samsung_usbphy_set_type(struct usb_phy *phy,
/*
* Returns reference clock frequency selection value
*/
-static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
+int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
struct clk *ref_clk;
int refclk_freq = 0;
@@ -445,486 +229,3 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)

return refclk_freq;
}
-
-static bool exynos5_phyhost_is_on(void *regs)
-{
- u32 reg;
-
- reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
- return !(reg & HOST_CTRL0_SIDDQ);
-}
-
-static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
-{
- void __iomem *regs = sphy->regs;
- u32 phyclk = sphy->ref_clk_freq;
- u32 phyhost;
- u32 phyotg;
- u32 phyhsic;
- u32 ehcictrl;
- u32 ohcictrl;
-
- /*
- * phy_usage helps in keeping usage count for phy
- * so that the first consumer enabling the phy is also
- * the last consumer to disable it.
- */
-
- atomic_inc(&sphy->phy_usage);
-
- if (exynos5_phyhost_is_on(regs)) {
- dev_info(sphy->dev, "Already power on PHY\n");
- return;
- }
-
- /* Host configuration */
- phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
- /* phy reference clock configuration */
- phyhost &= ~HOST_CTRL0_FSEL_MASK;
- phyhost |= HOST_CTRL0_FSEL(phyclk);
-
- /* host phy reset */
- phyhost &= ~(HOST_CTRL0_PHYSWRST |
- HOST_CTRL0_PHYSWRSTALL |
- HOST_CTRL0_SIDDQ |
- /* Enable normal mode of operation */
- HOST_CTRL0_FORCESUSPEND |
- HOST_CTRL0_FORCESLEEP);
-
- /* Link reset */
- phyhost |= (HOST_CTRL0_LINKSWRST |
- HOST_CTRL0_UTMISWRST |
- /* COMMON Block configuration during suspend */
- HOST_CTRL0_COMMONON_N);
- writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
- udelay(10);
- phyhost &= ~(HOST_CTRL0_LINKSWRST |
- HOST_CTRL0_UTMISWRST);
- writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
- /* OTG configuration */
- phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-
- /* phy reference clock configuration */
- phyotg &= ~OTG_SYS_FSEL_MASK;
- phyotg |= OTG_SYS_FSEL(phyclk);
-
- /* Enable normal mode of operation */
- phyotg &= ~(OTG_SYS_FORCESUSPEND |
- OTG_SYS_SIDDQ_UOTG |
- OTG_SYS_FORCESLEEP |
- OTG_SYS_REFCLKSEL_MASK |
- /* COMMON Block configuration during suspend */
- OTG_SYS_COMMON_ON);
-
- /* OTG phy & link reset */
- phyotg |= (OTG_SYS_PHY0_SWRST |
- OTG_SYS_LINKSWRST_UOTG |
- OTG_SYS_PHYLINK_SWRESET |
- OTG_SYS_OTGDISABLE |
- /* Set phy refclk */
- OTG_SYS_REFCLKSEL_CLKCORE);
-
- writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
- udelay(10);
- phyotg &= ~(OTG_SYS_PHY0_SWRST |
- OTG_SYS_LINKSWRST_UOTG |
- OTG_SYS_PHYLINK_SWRESET);
- writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-
- /* HSIC phy configuration */
- phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
- HSIC_CTRL_REFCLKSEL |
- HSIC_CTRL_PHYSWRST);
- writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
- writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
- udelay(10);
- phyhsic &= ~HSIC_CTRL_PHYSWRST;
- writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
- writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
- udelay(80);
-
- /* enable EHCI DMA burst */
- ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
- ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
- HOST_EHCICTRL_ENAINCR4 |
- HOST_EHCICTRL_ENAINCR8 |
- HOST_EHCICTRL_ENAINCR16);
- writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
-
- /* set ohci_suspend_on_n */
- ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
- ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
- writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
-}
-
-static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
-{
- void __iomem *regs = sphy->regs;
- u32 phypwr;
- u32 phyclk;
- u32 rstcon;
-
- /* set clock frequency for PLL */
- phyclk = sphy->ref_clk_freq;
- phypwr = readl(regs + SAMSUNG_PHYPWR);
- rstcon = readl(regs + SAMSUNG_RSTCON);
-
- switch (sphy->drv_data->cpu_type) {
- case TYPE_S3C64XX:
- phyclk &= ~PHYCLK_COMMON_ON_N;
- phypwr &= ~PHYPWR_NORMAL_MASK;
- rstcon |= RSTCON_SWRST;
- break;
- case TYPE_EXYNOS4210:
- phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
- rstcon |= RSTCON_SWRST;
- default:
- break;
- }
-
- writel(phyclk, regs + SAMSUNG_PHYCLK);
- /* Configure PHY0 for normal operation*/
- writel(phypwr, regs + SAMSUNG_PHYPWR);
- /* reset all ports of PHY and Link */
- writel(rstcon, regs + SAMSUNG_RSTCON);
- udelay(10);
- rstcon &= ~RSTCON_SWRST;
- writel(rstcon, regs + SAMSUNG_RSTCON);
-}
-
-static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
-{
- void __iomem *regs = sphy->regs;
- u32 phyhost;
- u32 phyotg;
- u32 phyhsic;
-
- if (atomic_dec_return(&sphy->phy_usage) > 0) {
- dev_info(sphy->dev, "still being used\n");
- return;
- }
-
- phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
- HSIC_CTRL_REFCLKSEL |
- HSIC_CTRL_SIDDQ |
- HSIC_CTRL_FORCESLEEP |
- HSIC_CTRL_FORCESUSPEND);
- writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
- writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
- phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
- phyhost |= (HOST_CTRL0_SIDDQ |
- HOST_CTRL0_FORCESUSPEND |
- HOST_CTRL0_FORCESLEEP |
- HOST_CTRL0_PHYSWRST |
- HOST_CTRL0_PHYSWRSTALL);
- writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
- phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
- phyotg |= (OTG_SYS_FORCESUSPEND |
- OTG_SYS_SIDDQ_UOTG |
- OTG_SYS_FORCESLEEP);
- writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-}
-
-static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
-{
- void __iomem *regs = sphy->regs;
- u32 phypwr;
-
- phypwr = readl(regs + SAMSUNG_PHYPWR);
-
- switch (sphy->drv_data->cpu_type) {
- case TYPE_S3C64XX:
- phypwr |= PHYPWR_NORMAL_MASK;
- break;
- case TYPE_EXYNOS4210:
- phypwr |= PHYPWR_NORMAL_MASK_PHY0;
- default:
- break;
- }
-
- /* Disable analog and otg block power */
- writel(phypwr, regs + SAMSUNG_PHYPWR);
-}
-
-/*
- * The function passed to the usb driver for phy initialization
- */
-static int samsung_usbphy_init(struct usb_phy *phy)
-{
- struct samsung_usbphy *sphy;
- struct usb_bus *host = NULL;
- unsigned long flags;
- int ret = 0;
-
- sphy = phy_to_sphy(phy);
-
- host = phy->otg->host;
-
- /* Enable the phy clock */
- ret = clk_prepare_enable(sphy->clk);
- if (ret) {
- dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
- return ret;
- }
-
- spin_lock_irqsave(&sphy->lock, flags);
-
- if (host) {
- /* setting default phy-type for USB 2.0 */
- if (!strstr(dev_name(host->controller), "ehci") ||
- !strstr(dev_name(host->controller), "ohci"))
- samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
- } else {
- samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
- }
-
- /* Disable phy isolation */
- if (sphy->plat && sphy->plat->pmu_isolation)
- sphy->plat->pmu_isolation(false);
- else
- samsung_usbphy_set_isolation(sphy, false);
-
- /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
- samsung_usbphy_cfg_sel(sphy);
-
- /* Initialize usb phy registers */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- samsung_exynos5_usbphy_enable(sphy);
- else
- samsung_usbphy_enable(sphy);
-
- spin_unlock_irqrestore(&sphy->lock, flags);
-
- /* Disable the phy clock */
- clk_disable_unprepare(sphy->clk);
-
- return ret;
-}
-
-/*
- * The function passed to the usb driver for phy shutdown
- */
-static void samsung_usbphy_shutdown(struct usb_phy *phy)
-{
- struct samsung_usbphy *sphy;
- struct usb_bus *host = NULL;
- unsigned long flags;
-
- sphy = phy_to_sphy(phy);
-
- host = phy->otg->host;
-
- if (clk_prepare_enable(sphy->clk)) {
- dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
- return;
- }
-
- spin_lock_irqsave(&sphy->lock, flags);
-
- if (host) {
- /* setting default phy-type for USB 2.0 */
- if (!strstr(dev_name(host->controller), "ehci") ||
- !strstr(dev_name(host->controller), "ohci"))
- samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
- } else {
- samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
- }
-
- /* De-initialize usb phy registers */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- samsung_exynos5_usbphy_disable(sphy);
- else
- samsung_usbphy_disable(sphy);
-
- /* Enable phy isolation */
- if (sphy->plat && sphy->plat->pmu_isolation)
- sphy->plat->pmu_isolation(true);
- else
- samsung_usbphy_set_isolation(sphy, true);
-
- spin_unlock_irqrestore(&sphy->lock, flags);
-
- clk_disable_unprepare(sphy->clk);
-}
-
-static const struct of_device_id samsung_usbphy_dt_match[];
-
-static inline const struct samsung_usbphy_drvdata
-*samsung_usbphy_get_driver_data(struct platform_device *pdev)
-{
- if (pdev->dev.of_node) {
- const struct of_device_id *match;
- match = of_match_node(samsung_usbphy_dt_match,
- pdev->dev.of_node);
- return match->data;
- }
-
- return (struct samsung_usbphy_drvdata *)
- platform_get_device_id(pdev)->driver_data;
-}
-
-static int samsung_usbphy_probe(struct platform_device *pdev)
-{
- struct samsung_usbphy *sphy;
- struct usb_otg *otg;
- struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
- const struct samsung_usbphy_drvdata *drv_data;
- struct device *dev = &pdev->dev;
- struct resource *phy_mem;
- void __iomem *phy_base;
- struct clk *clk;
- int ret;
-
- phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!phy_mem) {
- dev_err(dev, "%s: missing mem resource\n", __func__);
- return -ENODEV;
- }
-
- phy_base = devm_request_and_ioremap(dev, phy_mem);
- if (!phy_base) {
- dev_err(dev, "%s: register mapping failed\n", __func__);
- return -ENXIO;
- }
-
- sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
- if (!sphy)
- return -ENOMEM;
-
- otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
- if (!otg)
- return -ENOMEM;
-
- drv_data = samsung_usbphy_get_driver_data(pdev);
-
- if (drv_data->cpu_type == TYPE_EXYNOS5250)
- clk = devm_clk_get(dev, "usbhost");
- else
- clk = devm_clk_get(dev, "otg");
-
- if (IS_ERR(clk)) {
- dev_err(dev, "Failed to get otg clock\n");
- return PTR_ERR(clk);
- }
-
- sphy->dev = dev;
-
- if (dev->of_node) {
- ret = samsung_usbphy_parse_dt(sphy);
- if (ret < 0)
- return ret;
- } else {
- if (!pdata) {
- dev_err(dev, "no platform data specified\n");
- return -EINVAL;
- }
- }
-
- sphy->plat = pdata;
- sphy->regs = phy_base;
- sphy->clk = clk;
- sphy->drv_data = drv_data;
- sphy->phy.dev = sphy->dev;
- sphy->phy.label = "samsung-usbphy";
- sphy->phy.init = samsung_usbphy_init;
- sphy->phy.shutdown = samsung_usbphy_shutdown;
- sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
-
- sphy->phy.otg = otg;
- sphy->phy.otg->phy = &sphy->phy;
- sphy->phy.otg->set_host = samsung_usbphy_set_host;
-
- spin_lock_init(&sphy->lock);
-
- platform_set_drvdata(pdev, sphy);
-
- return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
-}
-
-static int samsung_usbphy_remove(struct platform_device *pdev)
-{
- struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
-
- usb_remove_phy(&sphy->phy);
-
- if (sphy->pmuregs)
- iounmap(sphy->pmuregs);
- if (sphy->sysreg)
- iounmap(sphy->sysreg);
-
- return 0;
-}
-
-static const struct samsung_usbphy_drvdata usbphy_s3c64xx = {
- .cpu_type = TYPE_S3C64XX,
- .devphy_en_mask = S3C64XX_USBPHY_ENABLE,
-};
-
-static const struct samsung_usbphy_drvdata usbphy_exynos4 = {
- .cpu_type = TYPE_EXYNOS4210,
- .devphy_en_mask = EXYNOS_USBPHY_ENABLE,
- .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
-};
-
-static struct samsung_usbphy_drvdata usbphy_exynos5 = {
- .cpu_type = TYPE_EXYNOS5250,
- .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
- .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id samsung_usbphy_dt_match[] = {
- {
- .compatible = "samsung,s3c64xx-usbphy",
- .data = &usbphy_s3c64xx,
- }, {
- .compatible = "samsung,exynos4210-usbphy",
- .data = &usbphy_exynos4,
- }, {
- .compatible = "samsung,exynos5250-usbphy",
- .data = &usbphy_exynos5
- },
- {},
-};
-MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
-#endif
-
-static struct platform_device_id samsung_usbphy_driver_ids[] = {
- {
- .name = "s3c64xx-usbphy",
- .driver_data = (unsigned long)&usbphy_s3c64xx,
- }, {
- .name = "exynos4210-usbphy",
- .driver_data = (unsigned long)&usbphy_exynos4,
- }, {
- .name = "exynos5250-usbphy",
- .driver_data = (unsigned long)&usbphy_exynos5,
- },
- {},
-};
-
-MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
-
-static struct platform_driver samsung_usbphy_driver = {
- .probe = samsung_usbphy_probe,
- .remove = samsung_usbphy_remove,
- .id_table = samsung_usbphy_driver_ids,
- .driver = {
- .name = "samsung-usbphy",
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(samsung_usbphy_dt_match),
- },
-};
-
-module_platform_driver(samsung_usbphy_driver);
-
-MODULE_DESCRIPTION("Samsung USB phy controller");
-MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-usbphy");
diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
new file mode 100644
index 0000000..969632b
--- /dev/null
+++ b/drivers/usb/phy/samsung-usbphy.h
@@ -0,0 +1,247 @@
+/* linux/drivers/usb/phy/samsung-usbphy.h
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
+ * OHCI-EXYNOS controllers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/usb/phy.h>
+
+/* Register definitions */
+
+#define SAMSUNG_PHYPWR (0x00)
+
+#define PHYPWR_NORMAL_MASK (0x19 << 0)
+#define PHYPWR_OTG_DISABLE (0x1 << 4)
+#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
+#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
+/* For Exynos4 */
+#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
+#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
+
+#define SAMSUNG_PHYCLK (0x04)
+
+#define PHYCLK_MODE_USB11 (0x1 << 6)
+#define PHYCLK_EXT_OSC (0x1 << 5)
+#define PHYCLK_COMMON_ON_N (0x1 << 4)
+#define PHYCLK_ID_PULL (0x1 << 2)
+#define PHYCLK_CLKSEL_MASK (0x3 << 0)
+#define PHYCLK_CLKSEL_48M (0x0 << 0)
+#define PHYCLK_CLKSEL_12M (0x2 << 0)
+#define PHYCLK_CLKSEL_24M (0x3 << 0)
+
+#define SAMSUNG_RSTCON (0x08)
+
+#define RSTCON_PHYLINK_SWRST (0x1 << 2)
+#define RSTCON_HLINK_SWRST (0x1 << 1)
+#define RSTCON_SWRST (0x1 << 0)
+
+/* EXYNOS5 */
+#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
+
+#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
+
+#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
+#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
+#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
+#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
+
+#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
+#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
+
+#define FSEL_CLKSEL_50M (0x7)
+#define FSEL_CLKSEL_24M (0x5)
+#define FSEL_CLKSEL_20M (0x4)
+#define FSEL_CLKSEL_19200K (0x3)
+#define FSEL_CLKSEL_12M (0x2)
+#define FSEL_CLKSEL_10M (0x1)
+#define FSEL_CLKSEL_9600K (0x0)
+
+#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
+#define HOST_CTRL0_RETENABLE (0x1 << 10)
+#define HOST_CTRL0_COMMONON_N (0x1 << 9)
+#define HOST_CTRL0_SIDDQ (0x1 << 6)
+#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
+#define HOST_CTRL0_UTMISWRST (0x1 << 2)
+#define HOST_CTRL0_LINKSWRST (0x1 << 1)
+#define HOST_CTRL0_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
+
+#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
+
+#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
+
+#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
+
+#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
+
+#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
+#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
+
+#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
+#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
+#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
+#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
+#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
+#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
+#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
+
+#define HSIC_CTRL_SIDDQ (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
+#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
+#define HSIC_CTRL_UTMISWRST (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
+
+#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
+#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
+#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
+#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
+
+#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
+
+#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
+#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
+#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
+#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_SYS (0x38)
+
+#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
+#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
+#define OTG_SYS_PHY0_SWRST (0x1 << 12)
+
+#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
+#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
+#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
+#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
+
+#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
+#define OTG_SYS_COMMON_ON (0x1 << 7)
+
+#define OTG_SYS_FSEL_MASK (0x7 << 4)
+#define OTG_SYS_FSEL(_x) ((_x) << 4)
+
+#define OTG_SYS_FORCESLEEP (0x1 << 3)
+#define OTG_SYS_OTGDISABLE (0x1 << 2)
+#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
+#define OTG_SYS_FORCESUSPEND (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_TUNE (0x40)
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
+#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
+#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
+#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
+#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
+
+enum samsung_cpu_type {
+ TYPE_S3C64XX,
+ TYPE_EXYNOS4210,
+ TYPE_EXYNOS5250,
+};
+
+/*
+ * struct samsung_usbphy_drvdata - driver data for various SoC variants
+ * @cpu_type: machine identifier
+ * @devphy_en_mask: device phy enable mask for PHY CONTROL register
+ * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
+ * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
+ * mapped address of system controller.
+ * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
+ * mapped address of system controller.
+ *
+ * Here we have a separate mask for device type phy.
+ * Having different masks for host and device type phy helps
+ * in setting independent masks in case of SoCs like S5PV210,
+ * in which PHY0 and PHY1 enable bits belong to same register
+ * placed at position 0 and 1 respectively.
+ * Although for newer SoCs like exynos these bits belong to
+ * different registers altogether placed at position 0.
+ */
+struct samsung_usbphy_drvdata {
+ int cpu_type;
+ int devphy_en_mask;
+ int hostphy_en_mask;
+ u32 devphy_reg_offset;
+ u32 hostphy_reg_offset;
+};
+
+/*
+ * struct samsung_usbphy - transceiver driver state
+ * @phy: transceiver structure
+ * @plat: platform data
+ * @dev: The parent device supplied to the probe function
+ * @clk: usb phy clock
+ * @regs: usb phy controller registers memory base
+ * @pmuregs: USB device PHY_CONTROL register memory base
+ * @sysreg: USB2.0 PHY_CFG register memory base
+ * @ref_clk_freq: reference clock frequency selection
+ * @drv_data: driver data available for different SoCs
+ * @phy_type: Samsung SoCs specific phy types: #HOST
+ * #DEVICE
+ * @phy_usage: usage count for phy
+ * @lock: lock for phy operations
+ */
+struct samsung_usbphy {
+ struct usb_phy phy;
+ struct samsung_usbphy_data *plat;
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *regs;
+ void __iomem *pmuregs;
+ void __iomem *sysreg;
+ int ref_clk_freq;
+ const struct samsung_usbphy_drvdata *drv_data;
+ enum samsung_usb_phy_type phy_type;
+ atomic_t phy_usage;
+ spinlock_t lock;
+};
+
+#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
+
+static const struct of_device_id samsung_usbphy_dt_match[];
+
+static inline const struct samsung_usbphy_drvdata
+*samsung_usbphy_get_driver_data(struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(samsung_usbphy_dt_match,
+ pdev->dev.of_node);
+ return match->data;
+ }
+
+ return (struct samsung_usbphy_drvdata *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
+extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
+extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on);
+extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
+extern int samsung_usbphy_set_type(struct usb_phy *phy,
+ enum samsung_usb_phy_type phy_type);
+extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
--
1.7.6.5


\
 
 \ /
  Last update: 2013-02-05 14:21    [W:0.406 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site