lkml.org 
[lkml]   [2013]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] mfd: rtsx: support RTS5227
Date
Support new model RTS5227.

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Reviewed-by: Wei WANG <wei_wang@realsil.com.cn>
---
drivers/mfd/Makefile | 2 +-
drivers/mfd/rts5227.c | 234 +++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/rtsx_pcr.c | 5 +
drivers/mfd/rtsx_pcr.h | 1 +
include/linux/mfd/rtsx_pci.h | 5 +
5 files changed, 246 insertions(+), 1 deletion(-)
create mode 100644 drivers/mfd/rts5227.c

diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8b977f8..b90409c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o

-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o
+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o

obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
new file mode 100644
index 0000000..fc831dc
--- /dev/null
+++ b/drivers/mfd/rts5227.c
@@ -0,0 +1,234 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ *
+ * Roger Tseng <rogerable@realtek.com>
+ * No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ u16 cap;
+
+ rtsx_pci_init_cmd(pcr);
+
+ /* Configure GPIO as output */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Switch LDO3318 source from DV33 to card_3v3 */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
+ /* LED shine disabled, set initial shine cycle period */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
+ /* Configure LTR */
+ pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap);
+ if (cap & PCI_EXP_LTR_EN)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3);
+ /* Configure OBFF */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03);
+ /* Configure force_clock_req
+ * Maybe We should define 0xFF03 as some name
+ */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFF03, 0x08, 0x08);
+ /* Correct driving */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD30_CLK_DRIVE_SEL, 0xFF, 0x96);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD30_CMD_DRIVE_SEL, 0xFF, 0x96);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD30_DAT_DRIVE_SEL, 0xFF, 0x96);
+
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
+{
+ /* Optimize RX sensitivity */
+ return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
+}
+
+static int rts5227_turn_on_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
+}
+
+static int rts5227_turn_off_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
+}
+
+static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
+}
+
+static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
+}
+
+static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_PARTIAL_POWER_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x02);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ /* To avoid too large in-rush current */
+ udelay(150);
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_POWER_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x06);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK | PMOS_STRG_MASK,
+ SD_POWER_OFF | PMOS_STRG_400mA);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0X00);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ int err;
+ u8 drive_sel;
+
+ if (voltage == OUTPUT_3V3) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+ if (err < 0)
+ return err;
+ drive_sel = 0x96;
+ } else if (voltage == OUTPUT_1V8) {
+ err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
+ if (err < 0)
+ return err;
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24);
+ if (err < 0)
+ return err;
+ drive_sel = 0xB3;
+ } else {
+ return -EINVAL;
+ }
+
+ /* set pad drive */
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
+ 0xFF, drive_sel);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
+ 0xFF, drive_sel);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
+ 0xFF, drive_sel);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static const struct pcr_ops rts5227_pcr_ops = {
+ .extra_init_hw = rts5227_extra_init_hw,
+ .optimize_phy = rts5227_optimize_phy,
+ .turn_on_led = rts5227_turn_on_led,
+ .turn_off_led = rts5227_turn_off_led,
+ .enable_auto_blink = rts5227_enable_auto_blink,
+ .disable_auto_blink = rts5227_disable_auto_blink,
+ .card_power_on = rts5227_card_power_on,
+ .card_power_off = rts5227_card_power_off,
+ .switch_output_voltage = rts5227_switch_output_voltage,
+ .cd_deglitch = NULL,
+ .conv_clk_and_div_n = NULL,
+};
+
+/* SD Pull Control Enable:
+ * SD_DAT[3:0] ==> pull up
+ * SD_CD ==> pull up
+ * SD_WP ==> pull up
+ * SD_CMD ==> pull up
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5227_sd_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+ 0,
+};
+
+/* SD Pull Control Disable:
+ * SD_DAT[3:0] ==> pull down
+ * SD_CD ==> pull up
+ * SD_WP ==> pull down
+ * SD_CMD ==> pull down
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5227_sd_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+ 0,
+};
+
+/* MS Pull Control Enable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5227_ms_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+/* MS Pull Control Disable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5227_ms_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+void rts5227_init_params(struct rtsx_pcr *pcr)
+{
+ pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+ pcr->num_slots = 2;
+ pcr->ops = &rts5227_pcr_ops;
+
+ pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
+ pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
+ pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
+ pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 9016932..822237e 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -55,6 +55,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
{ PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};

@@ -998,6 +999,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5289:
rtl8411_init_params(pcr);
break;
+
+ case 0x5227:
+ rts5227_init_params(pcr);
+ break;
}

dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 33c210b..2b3ab8a 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -31,5 +31,6 @@
void rts5209_init_params(struct rtsx_pcr *pcr);
void rts5229_init_params(struct rtsx_pcr *pcr);
void rtl8411_init_params(struct rtsx_pcr *pcr);
+void rts5227_init_params(struct rtsx_pcr *pcr);

#endif
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 3f2bf26..5d9b81e 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -581,8 +581,11 @@
#define CARD_GPIO_DIR 0xFD57
#define CARD_GPIO 0xFD58
#define CARD_DATA_SOURCE 0xFD5B
+#define SD30_CLK_DRIVE_SEL 0xFD5A
#define CARD_SELECT 0xFD5C
#define SD30_DRIVE_SEL 0xFD5E
+#define SD30_CMD_DRIVE_SEL 0xFD5E
+#define SD30_DAT_DRIVE_SEL 0xFD5F
#define CARD_CLK_EN 0xFD69
#define SDIO_CTRL 0xFD6B
#define CD_PAD_CTL 0xFD73
@@ -655,6 +658,8 @@
#define MSGTXDATA3 0xFE47
#define MSGTXCTL 0xFE48
#define PETXCFG 0xFE49
+#define LTR_CTL 0xFE4A
+#define OBFF_CFG 0xFE4C

#define CDRESUMECTL 0xFE52
#define WAKE_SEL_CTL 0xFE54
--
1.7.12.1


\
 
 \ /
  Last update: 2013-02-04 09:46    [W:0.120 / U:5.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site