lkml.org 
[lkml]   [2013]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 40/73] regulator: ab8500: Add AB8505 register initialization
Date
This patch adds ab8505 specific regulators, e.g. Vaux4/5/6 and
removes ExtSupplies from ab8505. Finally it adapts register
names to new naming convention.

Signed-off-by: Daniel WILLERUD <daniel.willerud@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Reviewed-by: Rickard ANDERSSON <rickard.andersson@stericsson.com>
---
arch/arm/mach-ux500/board-mop500-regulators.c | 374 ++++++++++++++--
drivers/regulator/ab8500.c | 597 ++++++++++++++++++++++++-
include/linux/regulator/ab8500.h | 74 ++-
3 files changed, 1013 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 8e0679e..1b51f6d 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -5,6 +5,7 @@
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com>
* Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Daniel Willerud <daniel.willerud@stericsson.com>
*
* MOP500 board specific initialization for regulators
*/
@@ -102,6 +103,19 @@ static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
static struct regulator_consumer_supply ab8505_vaux4_consumers[] = {
};

+static struct regulator_consumer_supply ab8505_vaux5_consumers[] = {
+};
+
+static struct regulator_consumer_supply ab8505_vaux6_consumers[] = {
+};
+
+static struct regulator_consumer_supply ab8505_vadc_consumers[] = {
+ /* Internal general-purpose ADC */
+ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+ /* ADC for charger */
+ REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
+};
+
static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
/* TV-out DENC supply */
REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
@@ -475,9 +489,271 @@ static struct regulator_init_data ab8500_ext_regulators[] = {
},
};

-struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
+/* ab8505 regulator register initialization */
+static struct ab8500_regulator_reg_init ab8505_reg_init[] = {
+ /*
+ * VarmRequestCtrl
+ * VsmpsCRequestCtrl
+ * VsmpsARequestCtrl
+ * VsmpsBRequestCtrl
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00),
+ /*
+ * VsafeRequestCtrl
+ * VpllRequestCtrl
+ * VanaRequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00),
+ /*
+ * Vaux1RequestCtrl = HP/LP depending on VxRequest
+ * Vaux2RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00),
+ /*
+ * Vaux3RequestCtrl = HP/LP depending on VxRequest
+ * SwHPReq = Control through SWValid disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00),
+ /*
+ * VsmpsASysClkReq1HPValid
+ * VsmpsBSysClkReq1HPValid
+ * VsafeSysClkReq1HPValid
+ * VanaSysClkReq1HPValid = disabled
+ * VpllSysClkReq1HPValid
+ * Vaux1SysClkReq1HPValid = disabled
+ * Vaux2SysClkReq1HPValid = disabled
+ * Vaux3SysClkReq1HPValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
+ /*
+ * VsmpsCSysClkReq1HPValid
+ * VarmSysClkReq1HPValid
+ * VbbSysClkReq1HPValid
+ * VsmpsMSysClkReq1HPValid
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00),
+ /*
+ * VsmpsAHwHPReq1Valid
+ * VsmpsBHwHPReq1Valid
+ * VsafeHwHPReq1Valid
+ * VanaHwHPReq1Valid = disabled
+ * VpllHwHPReq1Valid
+ * Vaux1HwHPreq1Valid = disabled
+ * Vaux2HwHPReq1Valid = disabled
+ * Vaux3HwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00),
+ /*
+ * VsmpsMHwHPReq1Valid
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00),
+ /*
+ * VsmpsAHwHPReq2Valid
+ * VsmpsBHwHPReq2Valid
+ * VsafeHwHPReq2Valid
+ * VanaHwHPReq2Valid = disabled
+ * VpllHwHPReq2Valid
+ * Vaux1HwHPReq2Valid = disabled
+ * Vaux2HwHPReq2Valid = disabled
+ * Vaux3HwHPReq2Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00),
+ /*
+ * VsmpsMHwHPReq2Valid
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00),
+ /**
+ * VsmpsCSwHPReqValid
+ * VarmSwHPReqValid
+ * VsmpsASwHPReqValid
+ * VsmpsBSwHPReqValid
+ * VsafeSwHPReqValid
+ * VanaSwHPReqValid
+ * VanaSwHPReqValid = disabled
+ * VpllSwHPReqValid
+ * Vaux1SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00),
+ /*
+ * Vaux2SwHPReqValid = disabled
+ * Vaux3SwHPReqValid = disabled
+ * VsmpsMSwHPReqValid
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00),
+ /*
+ * SysClkReq2Valid1 = SysClkReq2 controlled
+ * SysClkReq3Valid1 = disabled
+ * SysClkReq4Valid1 = SysClkReq4 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a),
+ /*
+ * SysClkReq2Valid2 = disabled
+ * SysClkReq3Valid2 = disabled
+ * SysClkReq4Valid2 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00),
+ /*
+ * Vaux4SwHPReqValid
+ * Vaux4HwHPReq2Valid
+ * Vaux4HwHPReq1Valid
+ * Vaux4SysClkReq1HPValid
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00),
+ /*
+ * VadcEna = disabled
+ * VintCore12Ena = disabled
+ * VintCore12Sel = 1.25 V
+ * VintCore12LP = inactive (HP)
+ * VadcLP = inactive (HP)
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10),
+ /*
+ * VaudioEna = disabled
+ * VdmicEna = disabled
+ * Vamic1Ena = disabled
+ * Vamic2Ena = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00),
+ /*
+ * Vamic1_dzout = high-Z when Vamic1 is disabled
+ * Vamic2_dzout = high-Z when Vamic2 is disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00),
+ /*
+ * VsmpsARegu
+ * VsmpsASelCtrl
+ * VsmpsAAutoMode
+ * VsmpsAPWMMode
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00),
+ /*
+ * VsmpsBRegu
+ * VsmpsBSelCtrl
+ * VsmpsBAutoMode
+ * VsmpsBPWMMode
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00),
+ /*
+ * VsafeRegu
+ * VsafeSelCtrl
+ * VsafeAutoMode
+ * VsafePWMMode
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00),
+ /*
+ * VPll = Hw controlled (NOTE! PRCMU bits)
+ * VanaRegu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02),
+ /*
+ * Vaux1Regu = force HP
+ * Vaux2Regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01),
+ /*
+ * Vaux3Regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00),
+ /*
+ * VsmpsASel1
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00),
+ /*
+ * VsmpsASel2
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00),
+ /*
+ * VsmpsASel3
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00),
+ /*
+ * VsmpsBSel1
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00),
+ /*
+ * VsmpsBSel2
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00),
+ /*
+ * VsmpsBSel3
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00),
+ /*
+ * VsafeSel1
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00),
+ /*
+ * VsafeSel2
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00),
+ /*
+ * VsafeSel3
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00),
+ /*
+ * Vaux1Sel = 2.8 V
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C),
+ /*
+ * Vaux2Sel = 2.9 V
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d),
+ /*
+ * Vaux3Sel = 2.91 V
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07),
+ /*
+ * Vaux4RequestCtrl
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00),
+ /*
+ * Vaux4Regu
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00),
+ /*
+ * Vaux4Sel
+ */
+ INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00),
+ /*
+ * Vaux1Disch = short discharge time
+ * Vaux2Disch = short discharge time
+ * Vaux3Disch = short discharge time
+ * Vintcore12Disch = short discharge time
+ * VTVoutDisch = short discharge time
+ * VaudioDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00),
+ /*
+ * VanaDisch = short discharge time
+ * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
+ * VdmicDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00),
+ /*
+ * Vaux4Disch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00),
+ /*
+ * Vaux5Sel
+ * Vaux5LP
+ * Vaux5Ena
+ * Vaux5Disch
+ * Vaux5DisSfst
+ * Vaux5DisPulld
+ */
+ INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00),
+ /*
+ * Vaux6Sel
+ * Vaux6LP
+ * Vaux6Ena
+ * Vaux6DisPulld
+ */
+ INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00),
+};
+
+struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
/* supplies to the display/camera */
- [AB9540_LDO_AUX1] = {
+ [AB8505_LDO_AUX1] = {
.supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-DISPLAY",
@@ -491,7 +767,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vaux1_consumers,
},
/* supplies to the on-board eMMC */
- [AB9540_LDO_AUX2] = {
+ [AB8505_LDO_AUX2] = {
.supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-eMMC1",
@@ -507,7 +783,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vaux2_consumers,
},
/* supply for VAUX3, supplies to SDcard slots */
- [AB9540_LDO_AUX3] = {
+ [AB8505_LDO_AUX3] = {
.supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-MMC-SD",
@@ -523,7 +799,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vaux3_consumers,
},
/* supply for VAUX4, supplies to NFC and standalone secure element */
- [AB9540_LDO_AUX4] = {
+ [AB8505_LDO_AUX4] = {
.constraints = {
.name = "V-NFC-SE",
.min_uV = 1100000,
@@ -537,17 +813,47 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers),
.consumer_supplies = ab8505_vaux4_consumers,
},
- /* supply for tvout, gpadc, TVOUT LDO */
- [AB9540_LDO_TVOUT] = {
+ /* supply for VAUX5, supplies to TBD */
+ [AB8505_LDO_AUX5] = {
.constraints = {
- .name = "V-TVOUT",
+ .name = "V-AUX5",
+ .min_uV = 1050000,
+ .max_uV = 2790000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_IDLE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers),
+ .consumer_supplies = ab8505_vaux5_consumers,
+ },
+ /* supply for VAUX6, supplies to TBD */
+ [AB8505_LDO_AUX6] = {
+ .constraints = {
+ .name = "V-AUX6",
+ .min_uV = 1050000,
+ .max_uV = 2790000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_IDLE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers),
+ .consumer_supplies = ab8505_vaux6_consumers,
+ },
+ /* supply for gpadc, ADC LDO */
+ [AB8505_LDO_ADC] = {
+ .constraints = {
+ .name = "V-ADC",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
- .consumer_supplies = ab8500_vtvout_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers),
+ .consumer_supplies = ab8505_vadc_consumers,
},
/* supply for ab8500-vaudio, VAUDIO LDO */
- [AB9540_LDO_AUDIO] = {
+ [AB8505_LDO_AUDIO] = {
.constraints = {
.name = "V-AUD",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -556,7 +862,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vaud_consumers,
},
/* supply for v-anamic1 VAMic1-LDO */
- [AB9540_LDO_ANAMIC1] = {
+ [AB8505_LDO_ANAMIC1] = {
.constraints = {
.name = "V-AMIC1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -565,7 +871,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vamic1_consumers,
},
/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB9540_LDO_ANAMIC2] = {
+ [AB8505_LDO_ANAMIC2] = {
.constraints = {
.name = "V-AMIC2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -574,7 +880,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vamic2_consumers,
},
/* supply for v-dmic, VDMIC LDO */
- [AB9540_LDO_DMIC] = {
+ [AB8505_LDO_DMIC] = {
.constraints = {
.name = "V-DMIC",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -583,7 +889,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vdmic_consumers,
},
/* supply for v-intcore12, VINTCORE12 LDO */
- [AB9540_LDO_INTCORE] = {
+ [AB8505_LDO_INTCORE] = {
.constraints = {
.name = "V-INTCORE",
.min_uV = 1250000,
@@ -600,7 +906,7 @@ struct regulator_init_data ab8505_regulators[AB9540_NUM_REGULATORS] = {
.consumer_supplies = ab8500_vintcore_consumers,
},
/* supply for U8500 CSI-DSI, VANA LDO */
- [AB9540_LDO_ANA] = {
+ [AB8505_LDO_ANA] = {
.constraints = {
.name = "V-CSI-DSI",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -621,8 +927,8 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {

/* Use the AB8500 init settings for AB8505 as they are the same right now */
struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
- .reg_init = ab8500_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8500_reg_init),
+ .reg_init = ab8505_reg_init,
+ .num_reg_init = ARRAY_SIZE(ab8505_reg_init),
.regulator = ab8505_regulators,
.num_regulator = ARRAY_SIZE(ab8505_regulators),
.ext_regulator = ab8500_ext_regulators,
@@ -633,14 +939,27 @@ static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
{
int i;

- for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
- if (ab8500_reg_init[i].id == id) {
- u8 initval = ab8500_reg_init[i].value;
- initval = (initval & ~mask) | (value & mask);
- ab8500_reg_init[i].value = initval;
+ if (cpu_is_u8520()) {
+ for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) {
+ if (ab8505_reg_init[i].id == id) {
+ u8 initval = ab8505_reg_init[i].value;
+ initval = (initval & ~mask) | (value & mask);
+ ab8505_reg_init[i].value = initval;

- BUG_ON(mask & ~ab8500_reg_init[i].mask);
- return;
+ BUG_ON(mask & ~ab8505_reg_init[i].mask);
+ return;
+ }
+ }
+ } else {
+ for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
+ if (ab8500_reg_init[i].id == id) {
+ u8 initval = ab8500_reg_init[i].value;
+ initval = (initval & ~mask) | (value & mask);
+ ab8500_reg_init[i].value = initval;
+
+ BUG_ON(mask & ~ab8500_reg_init[i].mask);
+ return;
+ }
}
}

@@ -662,6 +981,11 @@ void mop500_regulator_init(void)
regulator->constraints.state_standby.disabled = 1;
}

+ if (cpu_is_u8520()) {
+ /* Vaux2 initialized to be on */
+ ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
+ }
+
/*
* Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
* all HREFP_V20 boards)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index a3d8e76..2fc23c6 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -5,11 +5,15 @@
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
*
* AB8500 peripheral regulators
*
* AB8500 supports the following regulators:
* VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
+ *
+ * AB8505 supports the following regulators:
+ * VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -95,6 +99,17 @@ static const unsigned int ldo_vaux3_voltages[] = {
2910000,
};

+static const int ldo_vaux56_voltages[] = {
+ 1800000,
+ 1050000,
+ 1100000,
+ 1200000,
+ 1500000,
+ 2200000,
+ 2500000,
+ 2790000,
+};
+
static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
@@ -580,6 +595,312 @@ static struct ab8500_regulator_info
},
};

+/* AB8505 regulator information */
+static struct ab8500_regulator_info
+ ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
+ /*
+ * Variable Voltage Regulators
+ * name, min mV, max mV,
+ * update bank, reg, mask, enable val
+ * volt bank, reg, mask, table, table length
+ */
+ [AB8505_LDO_AUX1] = {
+ .desc = {
+ .name = "LDO-AUX1",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX1,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x1f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8505_LDO_AUX2] = {
+ .desc = {
+ .name = "LDO-AUX2",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX2,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x20,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8505_LDO_AUX3] = {
+ .desc = {
+ .name = "LDO-AUX3",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX3,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x0a,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x21,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux3_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ [AB8505_LDO_AUX4] = {
+ .desc = {
+ .name = "LDO-AUX4",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB9540_LDO_AUX4,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ /* values for Vaux4Regu register */
+ .update_bank = 0x04,
+ .update_reg = 0x2e,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ /* values for Vaux4SEL register */
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x2f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8505_LDO_AUX5] = {
+ .desc = {
+ .name = "LDO-AUX5",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_AUX5,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ .min_uV = 1050000,
+ .max_uV = 2790000,
+ .load_lp_uA = 2000,
+ /* values for CtrlVaux5 register */
+ .update_bank = 0x01,
+ .update_reg = 0x55,
+ .update_mask = 0x08,
+ .update_val = 0x00,
+ .update_val_idle = 0x01,
+ .update_val_normal = 0x00,
+ .voltage_bank = 0x01,
+ .voltage_reg = 0x55,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux56_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ [AB8505_LDO_AUX6] = {
+ .desc = {
+ .name = "LDO-AUX6",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_AUX6,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ .min_uV = 1050000,
+ .max_uV = 2790000,
+ .load_lp_uA = 2000,
+ /* values for CtrlVaux6 register */
+ .update_bank = 0x01,
+ .update_reg = 0x56,
+ .update_mask = 0x08,
+ .update_val = 0x00,
+ .update_val_idle = 0x01,
+ .update_val_normal = 0x00,
+ .voltage_bank = 0x01,
+ .voltage_reg = 0x56,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux56_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux56_voltages),
+ },
+ [AB8505_LDO_INTCORE] = {
+ .desc = {
+ .name = "LDO-INTCORE",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_INTCORE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x44,
+ .update_val = 0x44,
+ .update_val_idle = 0x44,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x03,
+ .voltage_reg = 0x80,
+ .voltage_mask = 0x38,
+ .voltages = ldo_vintcore_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+
+ /*
+ * Fixed Voltage Regulators
+ * name, fixed mV,
+ * update bank, reg, mask, enable val
+ */
+ [AB8505_LDO_ADC] = {
+ .desc = {
+ .name = "LDO-ADC",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8505_LDO_ADC,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .delay = 10000,
+ .fixed_uV = 2000000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x82,
+ .update_val = 0x02,
+ .update_val_idle = 0x82,
+ .update_val_normal = 0x02,
+ },
+ [AB8505_LDO_USB] = {
+ .desc = {
+ .name = "LDO-USB",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB9540_LDO_USB,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 3300000,
+ .update_bank = 0x03,
+ .update_reg = 0x82,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ },
+ [AB8505_LDO_AUDIO] = {
+ .desc = {
+ .name = "LDO-AUDIO",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUDIO,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2000000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x02,
+ .update_val = 0x02,
+ },
+ [AB8505_LDO_ANAMIC1] = {
+ .desc = {
+ .name = "LDO-ANAMIC1",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC1,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x08,
+ .update_val = 0x08,
+ },
+ [AB8505_LDO_ANAMIC2] = {
+ .desc = {
+ .name = "LDO-ANAMIC2",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC2,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x10,
+ .update_val = 0x10,
+ },
+ [AB8505_LDO_DMIC] = {
+ .desc = {
+ .name = "LDO-DMIC",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_DMIC,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1800000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x04,
+ .update_val = 0x04,
+ },
+ /*
+ * Regulators with fixed voltage and normal/idle modes
+ */
+ [AB8505_LDO_ANA] = {
+ .desc = {
+ .name = "LDO-ANA",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANA,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1200000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x04,
+ .update_reg = 0x06,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ },
+};
+
/* AB9540 regulator information */
static struct ab8500_regulator_info
ab9540_regulator_info[AB9540_NUM_REGULATORS] = {
@@ -1021,6 +1342,268 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
};

+/* AB8505 register init */
+static struct ab8500_reg_init ab8505_reg_init[] = {
+ /*
+ * 0x03, VarmRequestCtrl
+ * 0x0c, VsmpsCRequestCtrl
+ * 0x30, VsmpsARequestCtrl
+ * 0xc0, VsmpsBRequestCtrl
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
+ /*
+ * 0x03, VsafeRequestCtrl
+ * 0x0c, VpllRequestCtrl
+ * 0x30, VanaRequestCtrl
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL2, 0x03, 0x04, 0x3f),
+ /*
+ * 0x30, Vaux1RequestCtrl
+ * 0xc0, Vaux2RequestCtrl
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL3, 0x03, 0x05, 0xf0),
+ /*
+ * 0x03, Vaux3RequestCtrl
+ * 0x04, SwHPReq
+ */
+ REG_INIT(AB8505_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
+ /*
+ * 0x01, VsmpsASysClkReq1HPValid
+ * 0x02, VsmpsBSysClkReq1HPValid
+ * 0x04, VsafeSysClkReq1HPValid
+ * 0x08, VanaSysClkReq1HPValid
+ * 0x10, VpllSysClkReq1HPValid
+ * 0x20, Vaux1SysClkReq1HPValid
+ * 0x40, Vaux2SysClkReq1HPValid
+ * 0x80, Vaux3SysClkReq1HPValid
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
+ /*
+ * 0x01, VsmpsCSysClkReq1HPValid
+ * 0x02, VarmSysClkReq1HPValid
+ * 0x04, VbbSysClkReq1HPValid
+ * 0x08, VsmpsMSysClkReq1HPValid
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f),
+ /*
+ * 0x01, VsmpsAHwHPReq1Valid
+ * 0x02, VsmpsBHwHPReq1Valid
+ * 0x04, VsafeHwHPReq1Valid
+ * 0x08, VanaHwHPReq1Valid
+ * 0x10, VpllHwHPReq1Valid
+ * 0x20, Vaux1HwHPReq1Valid
+ * 0x40, Vaux2HwHPReq1Valid
+ * 0x80, Vaux3HwHPReq1Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
+ /*
+ * 0x08, VsmpsMHwHPReq1Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x08),
+ /*
+ * 0x01, VsmpsAHwHPReq2Valid
+ * 0x02, VsmpsBHwHPReq2Valid
+ * 0x04, VsafeHwHPReq2Valid
+ * 0x08, VanaHwHPReq2Valid
+ * 0x10, VpllHwHPReq2Valid
+ * 0x20, Vaux1HwHPReq2Valid
+ * 0x40, Vaux2HwHPReq2Valid
+ * 0x80, Vaux3HwHPReq2Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
+ /*
+ * 0x08, VsmpsMHwHPReq2Valid
+ */
+ REG_INIT(AB8505_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x08),
+ /*
+ * 0x01, VsmpsCSwHPReqValid
+ * 0x02, VarmSwHPReqValid
+ * 0x04, VsmpsASwHPReqValid
+ * 0x08, VsmpsBSwHPReqValid
+ * 0x10, VsafeSwHPReqValid
+ * 0x20, VanaSwHPReqValid
+ * 0x40, VpllSwHPReqValid
+ * 0x80, Vaux1SwHPReqValid
+ */
+ REG_INIT(AB8505_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
+ /*
+ * 0x01, Vaux2SwHPReqValid
+ * 0x02, Vaux3SwHPReqValid
+ * 0x20, VsmpsMSwHPReqValid
+ */
+ REG_INIT(AB8505_REGUSWHPREQVALID2, 0x03, 0x0e, 0x23),
+ /*
+ * 0x02, SysClkReq2Valid1
+ * 0x04, SysClkReq3Valid1
+ * 0x08, SysClkReq4Valid1
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0x0e),
+ /*
+ * 0x02, SysClkReq2Valid2
+ * 0x04, SysClkReq3Valid2
+ * 0x08, SysClkReq4Valid2
+ */
+ REG_INIT(AB8505_REGUSYSCLKREQVALID2, 0x03, 0x10, 0x0e),
+ /*
+ * 0x01, Vaux4SwHPReqValid
+ * 0x02, Vaux4HwHPReq2Valid
+ * 0x04, Vaux4HwHPReq1Valid
+ * 0x08, Vaux4SysClkReq1HPValid
+ */
+ REG_INIT(AB8505_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
+ /*
+ * 0x02, VadcEna
+ * 0x04, VintCore12Ena
+ * 0x38, VintCore12Sel
+ * 0x40, VintCore12LP
+ * 0x80, VadcLP
+ */
+ REG_INIT(AB8505_REGUMISC1, 0x03, 0x80, 0xfe),
+ /*
+ * 0x02, VaudioEna
+ * 0x04, VdmicEna
+ * 0x08, Vamic1Ena
+ * 0x10, Vamic2Ena
+ */
+ REG_INIT(AB8505_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
+ /*
+ * 0x01, Vamic1_dzout
+ * 0x02, Vamic2_dzout
+ */
+ REG_INIT(AB8505_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
+ /*
+ * 0x03, VsmpsARegu
+ * 0x0c, VsmpsASelCtrl
+ * 0x10, VsmpsAAutoMode
+ * 0x20, VsmpsAPWMMode
+ */
+ REG_INIT(AB8505_VSMPSAREGU, 0x04, 0x03, 0x3f),
+ /*
+ * 0x03, VsmpsBRegu
+ * 0x0c, VsmpsBSelCtrl
+ * 0x10, VsmpsBAutoMode
+ * 0x20, VsmpsBPWMMode
+ */
+ REG_INIT(AB8505_VSMPSBREGU, 0x04, 0x04, 0x3f),
+ /*
+ * 0x03, VsafeRegu
+ * 0x0c, VsafeSelCtrl
+ * 0x10, VsafeAutoMode
+ * 0x20, VsafePWMMode
+ */
+ REG_INIT(AB8505_VSAFEREGU, 0x04, 0x05, 0x3f),
+ /*
+ * 0x03, VpllRegu (NOTE! PRCMU register bits)
+ * 0x0c, VanaRegu
+ */
+ REG_INIT(AB8505_VPLLVANAREGU, 0x04, 0x06, 0x0f),
+ /*
+ * 0x03, Vaux1Regu
+ * 0x0c, Vaux2Regu
+ */
+ REG_INIT(AB8505_VAUX12REGU, 0x04, 0x09, 0x0f),
+ /*
+ * 0x0f, Vaux3Regu
+ */
+ REG_INIT(AB8505_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
+ /*
+ * 0x3f, VsmpsASel1
+ */
+ REG_INIT(AB8505_VSMPSASEL1, 0x04, 0x13, 0x3f),
+ /*
+ * 0x3f, VsmpsASel2
+ */
+ REG_INIT(AB8505_VSMPSASEL2, 0x04, 0x14, 0x3f),
+ /*
+ * 0x3f, VsmpsASel3
+ */
+ REG_INIT(AB8505_VSMPSASEL3, 0x04, 0x15, 0x3f),
+ /*
+ * 0x3f, VsmpsBSel1
+ */
+ REG_INIT(AB8505_VSMPSBSEL1, 0x04, 0x17, 0x3f),
+ /*
+ * 0x3f, VsmpsBSel2
+ */
+ REG_INIT(AB8505_VSMPSBSEL2, 0x04, 0x18, 0x3f),
+ /*
+ * 0x3f, VsmpsBSel3
+ */
+ REG_INIT(AB8505_VSMPSBSEL3, 0x04, 0x19, 0x3f),
+ /*
+ * 0x7f, VsafeSel1
+ */
+ REG_INIT(AB8505_VSAFESEL1, 0x04, 0x1b, 0x7f),
+ /*
+ * 0x3f, VsafeSel2
+ */
+ REG_INIT(AB8505_VSAFESEL2, 0x04, 0x1c, 0x7f),
+ /*
+ * 0x3f, VsafeSel3
+ */
+ REG_INIT(AB8505_VSAFESEL3, 0x04, 0x1d, 0x7f),
+ /*
+ * 0x0f, Vaux1Sel
+ */
+ REG_INIT(AB8505_VAUX1SEL, 0x04, 0x1f, 0x0f),
+ /*
+ * 0x0f, Vaux2Sel
+ */
+ REG_INIT(AB8505_VAUX2SEL, 0x04, 0x20, 0x0f),
+ /*
+ * 0x07, Vaux3Sel
+ * 0x30, VRF1Sel
+ */
+ REG_INIT(AB8505_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
+ /*
+ * 0x03, Vaux4RequestCtrl
+ */
+ REG_INIT(AB8505_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
+ /*
+ * 0x03, Vaux4Regu
+ */
+ REG_INIT(AB8505_VAUX4REGU, 0x04, 0x2e, 0x03),
+ /*
+ * 0x0f, Vaux4Sel
+ */
+ REG_INIT(AB8505_VAUX4SEL, 0x04, 0x2f, 0x0f),
+ /*
+ * 0x04, Vaux1Disch
+ * 0x08, Vaux2Disch
+ * 0x10, Vaux3Disch
+ * 0x20, Vintcore12Disch
+ * 0x40, VTVoutDisch
+ * 0x80, VaudioDisch
+ */
+ REG_INIT(AB8505_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
+ /*
+ * 0x02, VanaDisch
+ * 0x04, VdmicPullDownEna
+ * 0x10, VdmicDisch
+ */
+ REG_INIT(AB8505_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
+ /*
+ * 0x01, Vaux4Disch
+ */
+ REG_INIT(AB8505_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
+ /*
+ * 0x07, Vaux5Sel
+ * 0x08, Vaux5LP
+ * 0x10, Vaux5Ena
+ * 0x20, Vaux5Disch
+ * 0x40, Vaux5DisSfst
+ * 0x80, Vaux5DisPulld
+ */
+ REG_INIT(AB8505_CTRLVAUX5, 0x01, 0x55, 0xff),
+ /*
+ * 0x07, Vaux6Sel
+ * 0x08, Vaux6LP
+ * 0x10, Vaux6Ena
+ * 0x80, Vaux6DisPulld
+ */
+ REG_INIT(AB8505_CTRLVAUX6, 0x01, 0x56, 0x9f),
+};
+
/* AB9540 register init */
static struct ab8500_reg_init ab9540_reg_init[] = {
/*
@@ -1442,10 +2025,10 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
match = ab9540_regulator_matches;
match_size = ARRAY_SIZE(ab9540_regulator_matches)
} else if (is_ab8505(ab8500)) {
- regulator_info = ab9540_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
- reg_init = ab8500_reg_init;
- reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
+ regulator_info = ab8505_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
+ reg_init = ab8505_reg_init;
+ reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
@@ -1536,9 +2119,12 @@ static int ab8500_regulator_remove(struct platform_device *pdev)
int regulator_info_size;


- if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
+ if (is_ab9540(ab8500)) {
regulator_info = ab9540_regulator_info;
regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
+ } else if (is_ab8505(ab8500)) {
+ regulator_info = ab8505_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
@@ -1597,5 +2183,6 @@ module_exit(ab8500_regulator_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
+MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
MODULE_ALIAS("platform:ab8500-regulator");
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 592a3f3..f17e91e 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -5,6 +5,7 @@
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
*/

#ifndef __LINUX_MFD_AB8500_REGULATOR_H
@@ -27,7 +28,28 @@ enum ab8500_regulator_id {
AB8500_NUM_REGULATORS,
};

-/* AB9450 regulators */
+/* AB8505 regulators */
+enum ab8505_regulator_id {
+ AB8505_LDO_AUX1,
+ AB8505_LDO_AUX2,
+ AB8505_LDO_AUX3,
+ AB8505_LDO_AUX4,
+ AB8505_LDO_AUX5,
+ AB8505_LDO_AUX6,
+ AB8505_LDO_INTCORE,
+ AB8505_LDO_ADC,
+ AB8505_LDO_USB,
+ AB8505_LDO_AUDIO,
+ AB8505_LDO_ANAMIC1,
+ AB8505_LDO_ANAMIC2,
+ AB8505_LDO_DMIC,
+ AB8505_LDO_ANA,
+ AB8505_SYSCLKREQ_2,
+ AB8505_SYSCLKREQ_4,
+ AB8505_NUM_REGULATORS,
+};
+
+/* AB9540 regulators */
enum ab9540_regulator_id {
AB9540_LDO_AUX1,
AB9540_LDO_AUX2,
@@ -46,7 +68,7 @@ enum ab9540_regulator_id {
AB9540_NUM_REGULATORS,
};

-/* AB8500 and AB9540 register initialization */
+/* AB8500, AB8505, and AB9540 register initialization */
struct ab8500_regulator_reg_init {
int id;
u8 mask;
@@ -92,6 +114,54 @@ enum ab8500_regulator_reg {
AB8500_NUM_REGULATOR_REGISTERS,
};

+/* AB8505 registers */
+enum ab8505_regulator_reg {
+ AB8505_REGUREQUESTCTRL1,
+ AB8505_REGUREQUESTCTRL2,
+ AB8505_REGUREQUESTCTRL3,
+ AB8505_REGUREQUESTCTRL4,
+ AB8505_REGUSYSCLKREQ1HPVALID1,
+ AB8505_REGUSYSCLKREQ1HPVALID2,
+ AB8505_REGUHWHPREQ1VALID1,
+ AB8505_REGUHWHPREQ1VALID2,
+ AB8505_REGUHWHPREQ2VALID1,
+ AB8505_REGUHWHPREQ2VALID2,
+ AB8505_REGUSWHPREQVALID1,
+ AB8505_REGUSWHPREQVALID2,
+ AB8505_REGUSYSCLKREQVALID1,
+ AB8505_REGUSYSCLKREQVALID2,
+ AB8505_REGUVAUX4REQVALID,
+ AB8505_REGUMISC1,
+ AB8505_VAUDIOSUPPLY,
+ AB8505_REGUCTRL1VAMIC,
+ AB8505_VSMPSAREGU,
+ AB8505_VSMPSBREGU,
+ AB8505_VSAFEREGU, /* NOTE! PRCMU register */
+ AB8505_VPLLVANAREGU,
+ AB8505_VAUX12REGU,
+ AB8505_VRF1VAUX3REGU,
+ AB8505_VSMPSASEL1,
+ AB8505_VSMPSASEL2,
+ AB8505_VSMPSASEL3,
+ AB8505_VSMPSBSEL1,
+ AB8505_VSMPSBSEL2,
+ AB8505_VSMPSBSEL3,
+ AB8505_VSAFESEL1, /* NOTE! PRCMU register */
+ AB8505_VSAFESEL2, /* NOTE! PRCMU register */
+ AB8505_VSAFESEL3, /* NOTE! PRCMU register */
+ AB8505_VAUX1SEL,
+ AB8505_VAUX2SEL,
+ AB8505_VRF1VAUX3SEL,
+ AB8505_VAUX4REQCTRL,
+ AB8505_VAUX4REGU,
+ AB8505_VAUX4SEL,
+ AB8505_REGUCTRLDISCH,
+ AB8505_REGUCTRLDISCH2,
+ AB8505_REGUCTRLDISCH3,
+ AB8505_CTRLVAUX5,
+ AB8505_CTRLVAUX6,
+ AB8505_NUM_REGULATOR_REGISTERS,
+};

/* AB9540 registers */
enum ab9540_regulator_reg {
--
1.7.9.5


\
 
 \ /
  Last update: 2013-02-04 15:24    [W:0.287 / U:40.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site