lkml.org 
[lkml]   [2013]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 71/73] regulator: ab8500: Remove the need for a 'delay' property
Date
The regulator framework now has provisions to read a regulator's
start-up time via the 'enable_time' attribute. So let's remove all
'enable_time'/'delay' duplication and just stick with 'enable_time'
from now on.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/ab8500.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 8ec5c4f..193bfda 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -63,7 +63,6 @@ struct ab8500_shared_mode {
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @voltage_shift: shift to control regulator voltage
- * @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
struct device *dev;
@@ -87,7 +86,6 @@ struct ab8500_regulator_info {
u8 voltage_reg;
u8 voltage_mask;
u8 voltage_shift;
- unsigned int delay;
struct {
u8 voltage_limit;
u8 voltage_bank;
@@ -652,7 +650,7 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);

- return info->delay;
+ return info->desc.enable_time;
}

static struct regulator_ops ab8500_regulator_volt_mode_ops = {
@@ -829,7 +827,6 @@ static struct ab8500_regulator_info
.volt_table = fixed_2000000_voltage,
.enable_time = 500,
},
- .delay = 500,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1099,7 +1096,6 @@ static struct ab8500_regulator_info
.volt_table = fixed_2000000_voltage,
.enable_time = 10000,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1364,7 +1360,6 @@ static struct ab8500_regulator_info
.volt_table = fixed_2000000_voltage,
.enable_time = 10000,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1661,7 +1656,6 @@ static struct ab8500_regulator_info
.n_voltages = 1,
.enable_time = 10000,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
--
1.7.9.5


\
 
 \ /
  Last update: 2013-02-04 14:02    [W:0.215 / U:13.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site