lkml.org 
[lkml]   [2013]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 4/4] PM: Devfreq: Add Exynos5-bus devfreq driver for Exynos5250
From
Hi Myungjoo,

Any comments on this patch ?

Abhilash

On Fri, Jan 18, 2013 at 6:54 PM, Abhilash Kesavan <a.kesavan@samsung.com> wrote:
> Exynos5-bus device devfreq driver monitors PPMU counters and
> adjusts operating frequencies and voltages with OPP. ASV should
> be used to provide appropriate voltages as per the speed group
> of the SoC rather than using a constant 1.025V.
>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Cc: Jonghwan Choi <jhbird.choi@samsung.com>
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> ---
> Changes since RFC v1:
> * Moved the Exynos5 PPMU driver to machine specific directory
> * Migrated to the PM QOS framework
> Changes since v2:
> * Moved the PPMU driver to drivers/devfreq/exynos
> * Fixed whitespace, commenting, empty lines in PPMU driver
> Changes since v3:
> * Removed the custom devfreq monitor and PPMU polling function
> * Moved exynos5 PPMU access functions to the devfreq driver
>
> drivers/devfreq/Kconfig | 10 +
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/exynos/Makefile | 1 +
> drivers/devfreq/exynos/exynos5_bus.c | 502 ++++++++++++++++++++++++++++++++++
> drivers/devfreq/exynos/exynos_ppmu.c | 55 ++++
> include/linux/exynos_ppmu.h | 79 ++++++
> 6 files changed, 648 insertions(+), 0 deletions(-)
> create mode 100644 drivers/devfreq/exynos/exynos5_bus.c
> create mode 100644 drivers/devfreq/exynos/exynos_ppmu.c
> create mode 100644 include/linux/exynos_ppmu.h
>
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index 0f079be..1560d0d 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -78,4 +78,14 @@ config ARM_EXYNOS4_BUS_DEVFREQ
> To operate with optimal voltages, ASV support is required
> (CONFIG_EXYNOS_ASV).
>
> +config ARM_EXYNOS5_BUS_DEVFREQ
> + bool "ARM Exynos5250 Bus DEVFREQ Driver"
> + depends on SOC_EXYNOS5250
> + select ARCH_HAS_OPP
> + select DEVFREQ_GOV_SIMPLE_ONDEMAND
> + help
> + This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
> + It reads PPMU counters of memory controllers and adjusts the
> + operating frequencies and voltages with OPP support.
> +
> endif # PM_DEVFREQ
> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> index 3bc1fef..16138c9 100644
> --- a/drivers/devfreq/Makefile
> +++ b/drivers/devfreq/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o
>
> # DEVFREQ Drivers
> obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
> +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
> diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
> index 1498823..bfaaf5b 100644
> --- a/drivers/devfreq/exynos/Makefile
> +++ b/drivers/devfreq/exynos/Makefile
> @@ -1,2 +1,3 @@
> # Exynos DEVFREQ Drivers
> obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o
> +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o
> diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c
> new file mode 100644
> index 0000000..fbdcbaf
> --- /dev/null
> +++ b/drivers/devfreq/exynos/exynos5_bus.c
> @@ -0,0 +1,502 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
> + * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com>
> + * Support for only EXYNOS5250 is present.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/devfreq.h>
> +#include <linux/io.h>
> +#include <linux/opp.h>
> +#include <linux/slab.h>
> +#include <linux/suspend.h>
> +#include <linux/opp.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_qos.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/exynos_ppmu.h>
> +
> +#define MAX_SAFEVOLT 1100000 /* 1.10V */
> +/* Assume that the bus is saturated if the utilization is 25% */
> +#define INT_BUS_SATURATION_RATIO 25
> +
> +enum int_level_idx {
> + LV_0,
> + LV_1,
> + LV_2,
> + LV_3,
> + LV_4,
> + _LV_END
> +};
> +
> +enum exynos_ppmu_list {
> + PPMU_RIGHT,
> + PPMU_END,
> +};
> +
> +struct busfreq_data_int {
> + struct device *dev;
> + struct devfreq *devfreq;
> + struct regulator *vdd_int;
> + struct exynos_ppmu ppmu[PPMU_END];
> + unsigned long curr_freq;
> + bool disabled;
> +
> + struct notifier_block pm_notifier;
> + struct mutex lock;
> + struct pm_qos_request int_req;
> + struct clk *int_clk;
> +};
> +
> +struct int_bus_opp_table {
> + unsigned int idx;
> + unsigned long clk;
> + unsigned long volt;
> +};
> +
> +static struct int_bus_opp_table exynos5_int_opp_table[] = {
> + {LV_0, 266000, 1025000},
> + {LV_1, 200000, 1025000},
> + {LV_2, 160000, 1025000},
> + {LV_3, 133000, 1025000},
> + {LV_4, 100000, 1025000},
> + {0, 0, 0},
> +};
> +
> +static void busfreq_mon_reset(struct busfreq_data_int *data)
> +{
> + unsigned int i;
> +
> + for (i = PPMU_RIGHT; i < PPMU_END; i++) {
> + void __iomem *ppmu_base = data->ppmu[i].hw_base;
> +
> + /* Reset the performance and cycle counters */
> + exynos_ppmu_reset(ppmu_base);
> +
> + /* Setup count registers to monitor read/write transactions */
> + data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
> + exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
> + data->ppmu[i].event[PPMU_PMNCNT3]);
> +
> + exynos_ppmu_start(ppmu_base);
> + }
> +}
> +
> +static void exynos5_read_ppmu(struct busfreq_data_int *data)
> +{
> + int i, j;
> +
> + for (i = PPMU_RIGHT; i < PPMU_END; i++) {
> + void __iomem *ppmu_base = data->ppmu[i].hw_base;
> +
> + exynos_ppmu_stop(ppmu_base);
> +
> + /* Update local data from PPMU */
> + data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
> +
> + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
> + if (data->ppmu[i].event[j] == 0)
> + data->ppmu[i].count[j] = 0;
> + else
> + data->ppmu[i].count[j] =
> + exynos_ppmu_read(ppmu_base, j);
> + }
> + }
> +
> + busfreq_mon_reset(data);
> +}
> +
> +static int exynos5_int_setvolt(struct busfreq_data_int *data,
> + unsigned long volt)
> +{
> + return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
> +}
> +
> +static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
> + u32 flags)
> +{
> + int err = 0;
> + struct platform_device *pdev = container_of(dev, struct platform_device,
> + dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> + struct opp *opp;
> + unsigned long old_freq, freq;
> + unsigned long volt;
> +
> + rcu_read_lock();
> + opp = devfreq_recommended_opp(dev, _freq, flags);
> + if (IS_ERR(opp)) {
> + rcu_read_unlock();
> + dev_err(dev, "%s: Invalid OPP.\n", __func__);
> + return PTR_ERR(opp);
> + }
> +
> + freq = opp_get_freq(opp);
> + volt = opp_get_voltage(opp);
> + rcu_read_unlock();
> +
> + old_freq = data->curr_freq;
> +
> + if (old_freq == freq)
> + return 0;
> +
> + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt);
> +
> + mutex_lock(&data->lock);
> +
> + if (data->disabled)
> + goto out;
> +
> + if (freq > exynos5_int_opp_table[0].clk)
> + pm_qos_update_request(&data->int_req, freq * 16 / 1000);
> + else
> + pm_qos_update_request(&data->int_req, -1);
> +
> + if (old_freq < freq)
> + err = exynos5_int_setvolt(data, volt);
> + if (err)
> + goto out;
> +
> + err = clk_set_rate(data->int_clk, freq * 1000);
> +
> + if (err)
> + goto out;
> +
> + if (old_freq > freq)
> + err = exynos5_int_setvolt(data, volt);
> + if (err)
> + goto out;
> +
> + data->curr_freq = freq;
> +out:
> + mutex_unlock(&data->lock);
> + return err;
> +}
> +
> +static int exynos5_get_busier_dmc(struct busfreq_data_int *data)
> +{
> + int i, j;
> + int busy = 0;
> + unsigned int temp = 0;
> +
> + for (i = PPMU_RIGHT; i < PPMU_END; i++) {
> + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
> + if (data->ppmu[i].count[j] > temp) {
> + temp = data->ppmu[i].count[j];
> + busy = i;
> + }
> + }
> + }
> +
> + return busy;
> +}
> +
> +static int exynos5_int_get_dev_status(struct device *dev,
> + struct devfreq_dev_status *stat)
> +{
> + struct platform_device *pdev = container_of(dev, struct platform_device,
> + dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> + int busier_dmc;
> +
> + exynos5_read_ppmu(data);
> + busier_dmc = exynos5_get_busier_dmc(data);
> +
> + stat->current_frequency = data->curr_freq;
> +
> + /* Number of cycles spent on memory access */
> + stat->busy_time = data->ppmu[busier_dmc].count[PPMU_PMNCNT3];
> + stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO;
> + stat->total_time = data->ppmu[busier_dmc].ccnt;
> +
> + return 0;
> +}
> +static void exynos5_int_exit(struct device *dev)
> +{
> + struct platform_device *pdev = container_of(dev, struct platform_device,
> + dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + devfreq_unregister_opp_notifier(dev, data->devfreq);
> +}
> +
> +static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
> + .initial_freq = 160000,
> + .polling_ms = 100,
> + .target = exynos5_busfreq_int_target,
> + .get_dev_status = exynos5_int_get_dev_status,
> + .exit = exynos5_int_exit,
> +};
> +
> +static int exynos5250_init_int_tables(struct busfreq_data_int *data)
> +{
> + int i, err = 0;
> +
> + for (i = LV_0; i < _LV_END; i++) {
> + err = opp_add(data->dev, exynos5_int_opp_table[i].clk,
> + exynos5_int_opp_table[i].volt);
> + if (err) {
> + dev_err(data->dev, "Cannot add opp entries.\n");
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
> + unsigned long event, void *ptr)
> +{
> + struct busfreq_data_int *data = container_of(this,
> + struct busfreq_data_int, pm_notifier);
> + struct opp *opp;
> + unsigned long maxfreq = ULONG_MAX;
> + unsigned long freq;
> + unsigned long volt;
> + int err = 0;
> +
> + switch (event) {
> + case PM_SUSPEND_PREPARE:
> + /* Set Fastest and Deactivate DVFS */
> + mutex_lock(&data->lock);
> +
> + data->disabled = true;
> +
> + rcu_read_lock();
> + opp = opp_find_freq_floor(data->dev, &maxfreq);
> + if (IS_ERR(opp)) {
> + rcu_read_unlock();
> + err = PTR_ERR(opp);
> + goto unlock;
> + }
> + freq = opp_get_freq(opp);
> + volt = opp_get_voltage(opp);
> + rcu_read_unlock();
> +
> + err = exynos5_int_setvolt(data, volt);
> + if (err)
> + goto unlock;
> +
> + err = clk_set_rate(data->int_clk, freq * 1000);
> +
> + if (err)
> + goto unlock;
> +
> + data->curr_freq = freq;
> +unlock:
> + mutex_unlock(&data->lock);
> + if (err)
> + return NOTIFY_BAD;
> + return NOTIFY_OK;
> + case PM_POST_RESTORE:
> + case PM_POST_SUSPEND:
> + /* Reactivate */
> + mutex_lock(&data->lock);
> + data->disabled = false;
> + mutex_unlock(&data->lock);
> + return NOTIFY_OK;
> + }
> +
> + return NOTIFY_DONE;
> +}
> +
> +static __devinit int exynos5_busfreq_int_probe(struct platform_device *pdev)
> +{
> + struct busfreq_data_int *data;
> + struct opp *opp;
> + struct device *dev = &pdev->dev;
> + struct device_node *np;
> + unsigned long initial_freq;
> + unsigned long initial_volt;
> + int err = 0;
> + int i;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
> + GFP_KERNEL);
> + if (data == NULL) {
> + dev_err(dev, "Cannot allocate memory.\n");
> + return -ENOMEM;
> + }
> +
> + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu");
> + if (np == NULL) {
> + pr_err("Unable to find PPMU node\n");
> + return -ENOENT;
> + }
> +
> + for (i = PPMU_RIGHT; i < PPMU_END; i++) {
> + /* map PPMU memory region */
> + data->ppmu[i].hw_base = of_iomap(np, i);
> + if (data->ppmu[i].hw_base == NULL) {
> + dev_err(&pdev->dev, "failed to map memory region\n");
> + return -ENOMEM;
> + }
> + }
> + data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event;
> + data->dev = dev;
> + mutex_init(&data->lock);
> +
> + err = exynos5250_init_int_tables(data);
> + if (err)
> + goto err_regulator;
> +
> + data->vdd_int = regulator_get(dev, "vdd_int");
> + if (IS_ERR(data->vdd_int)) {
> + dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
> + err = PTR_ERR(data->vdd_int);
> + goto err_regulator;
> + }
> +
> + data->int_clk = clk_get(dev, "int_clk");
> + if (IS_ERR(data->int_clk)) {
> + dev_err(dev, "Cannot get clock \"int_clk\"\n");
> + err = PTR_ERR(data->int_clk);
> + goto err_clock;
> + }
> +
> + rcu_read_lock();
> + opp = opp_find_freq_floor(dev,
> + &exynos5_devfreq_int_profile.initial_freq);
> + if (IS_ERR(opp)) {
> + rcu_read_unlock();
> + dev_err(dev, "Invalid initial frequency %lu kHz.\n",
> + exynos5_devfreq_int_profile.initial_freq);
> + err = PTR_ERR(opp);
> + goto err_opp_add;
> + }
> + initial_freq = opp_get_freq(opp);
> + initial_volt = opp_get_voltage(opp);
> + rcu_read_unlock();
> + data->curr_freq = initial_freq;
> +
> + err = clk_set_rate(data->int_clk, initial_freq * 1000);
> + if (err) {
> + dev_err(dev, "Failed to set initial frequency\n");
> + goto err_opp_add;
> + }
> +
> + err = exynos5_int_setvolt(data, initial_volt);
> + if (err)
> + goto err_opp_add;
> +
> + platform_set_drvdata(pdev, data);
> +
> + busfreq_mon_reset(data);
> +
> + data->devfreq = devfreq_add_device(dev, &exynos5_devfreq_int_profile,
> + "simple_ondemand", NULL);
> +
> + if (IS_ERR(data->devfreq)) {
> + err = PTR_ERR(data->devfreq);
> + goto err_devfreq_add;
> + }
> +
> + devfreq_register_opp_notifier(dev, data->devfreq);
> +
> + err = register_pm_notifier(&data->pm_notifier);
> + if (err) {
> + dev_err(dev, "Failed to setup pm notifier\n");
> + goto err_devfreq_add;
> + }
> +
> + /* TODO: Add a new QOS class for int/mif bus */
> + pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1);
> +
> + return 0;
> +
> +err_devfreq_add:
> + devfreq_remove_device(data->devfreq);
> + platform_set_drvdata(pdev, NULL);
> +err_opp_add:
> + clk_put(data->int_clk);
> +err_clock:
> + regulator_put(data->vdd_int);
> +err_regulator:
> + return err;
> +}
> +
> +static __devexit int exynos5_busfreq_int_remove(struct platform_device *pdev)
> +{
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + pm_qos_remove_request(&data->int_req);
> + unregister_pm_notifier(&data->pm_notifier);
> + devfreq_remove_device(data->devfreq);
> + regulator_put(data->vdd_int);
> + clk_put(data->int_clk);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static int exynos5_busfreq_int_resume(struct device *dev)
> +{
> + struct platform_device *pdev = container_of(dev, struct platform_device,
> + dev);
> + struct busfreq_data_int *data = platform_get_drvdata(pdev);
> +
> + busfreq_mon_reset(data);
> + return 0;
> +}
> +
> +static const struct dev_pm_ops exynos5_busfreq_int_pm = {
> + .resume = exynos5_busfreq_int_resume,
> +};
> +
> +/* platform device pointer for exynos5 devfreq device. */
> +static struct platform_device *exynos5_devfreq_pdev;
> +
> +static struct platform_driver exynos5_busfreq_int_driver = {
> + .probe = exynos5_busfreq_int_probe,
> + .remove = __devexit_p(exynos5_busfreq_int_remove),
> + .driver = {
> + .name = "exynos5-bus-int",
> + .owner = THIS_MODULE,
> + .pm = &exynos5_busfreq_int_pm,
> + },
> +};
> +
> +static int __init exynos5_busfreq_int_init(void)
> +{
> + int ret;
> +
> + ret = platform_driver_register(&exynos5_busfreq_int_driver);
> + if (ret < 0)
> + goto out;
> +
> + exynos5_devfreq_pdev =
> + platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
> + if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) {
> + ret = PTR_ERR(exynos5_devfreq_pdev);
> + goto out1;
> + }
> +
> + return 0;
> +out1:
> + platform_driver_unregister(&exynos5_busfreq_int_driver);
> +out:
> + return ret;
> +}
> +late_initcall(exynos5_busfreq_int_init);
> +
> +static void __exit exynos5_busfreq_int_exit(void)
> +{
> + platform_device_unregister(exynos5_devfreq_pdev);
> + platform_driver_unregister(&exynos5_busfreq_int_driver);
> +}
> +module_exit(exynos5_busfreq_int_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
> diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c
> new file mode 100644
> index 0000000..d667825
> --- /dev/null
> +++ b/drivers/devfreq/exynos/exynos_ppmu.c
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS - PPMU support
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/io.h>
> +#include <linux/exynos_ppmu.h>
> +
> +void exynos_ppmu_reset(void __iomem *ppmu_base)
> +{
> + __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
> + __raw_writel(PPMU_ENABLE_CYCLE |
> + PPMU_ENABLE_COUNT0 |
> + PPMU_ENABLE_COUNT1 |
> + PPMU_ENABLE_COUNT2 |
> + PPMU_ENABLE_COUNT3,
> + ppmu_base + PPMU_CNTENS);
> +}
> +
> +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
> + unsigned int evt)
> +{
> + __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
> +}
> +
> +void exynos_ppmu_start(void __iomem *ppmu_base)
> +{
> + __raw_writel(PPMU_ENABLE, ppmu_base);
> +}
> +
> +void exynos_ppmu_stop(void __iomem *ppmu_base)
> +{
> + __raw_writel(PPMU_DISABLE, ppmu_base);
> +}
> +
> +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
> +{
> + unsigned int total;
> +
> + if (ch == PPMU_PMNCNT3)
> + total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
> + __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
> + else
> + total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
> +
> + return total;
> +}
> diff --git a/include/linux/exynos_ppmu.h b/include/linux/exynos_ppmu.h
> new file mode 100644
> index 0000000..b46d31b
> --- /dev/null
> +++ b/include/linux/exynos_ppmu.h
> @@ -0,0 +1,79 @@
> +/*
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * EXYNOS PPMU header
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __DEVFREQ_EXYNOS_PPMU_H
> +#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
> +
> +#include <linux/ktime.h>
> +
> +/* For PPMU Control */
> +#define PPMU_ENABLE BIT(0)
> +#define PPMU_DISABLE 0x0
> +#define PPMU_CYCLE_RESET BIT(1)
> +#define PPMU_COUNTER_RESET BIT(2)
> +
> +#define PPMU_ENABLE_COUNT0 BIT(0)
> +#define PPMU_ENABLE_COUNT1 BIT(1)
> +#define PPMU_ENABLE_COUNT2 BIT(2)
> +#define PPMU_ENABLE_COUNT3 BIT(3)
> +#define PPMU_ENABLE_CYCLE BIT(31)
> +
> +#define PPMU_CNTENS 0x10
> +#define PPMU_FLAG 0x50
> +#define PPMU_CCNT_OVERFLOW BIT(31)
> +#define PPMU_CCNT 0x100
> +
> +#define PPMU_PMCNT0 0x110
> +#define PPMU_PMCNT_OFFSET 0x10
> +#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
> +
> +#define PPMU_BEVT0SEL 0x1000
> +#define PPMU_BEVTSEL_OFFSET 0x100
> +#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
> +
> +/* For Event Selection */
> +#define RD_DATA_COUNT 0x5
> +#define WR_DATA_COUNT 0x6
> +#define RDWR_DATA_COUNT 0x7
> +
> +enum ppmu_counter {
> + PPMU_PMNCNT0,
> + PPMU_PMCCNT1,
> + PPMU_PMNCNT2,
> + PPMU_PMNCNT3,
> + PPMU_PMNCNT_MAX,
> +};
> +
> +struct bus_opp_table {
> + unsigned int idx;
> + unsigned long clk;
> + unsigned long volt;
> +};
> +
> +struct exynos_ppmu {
> + void __iomem *hw_base;
> + unsigned int ccnt;
> + unsigned int event[PPMU_PMNCNT_MAX];
> + unsigned int count[PPMU_PMNCNT_MAX];
> + unsigned long long ns;
> + ktime_t reset_time;
> + bool ccnt_overflow;
> + bool count_overflow[PPMU_PMNCNT_MAX];
> +};
> +
> +void exynos_ppmu_reset(void __iomem *ppmu_base);
> +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
> + unsigned int evt);
> +void exynos_ppmu_start(void __iomem *ppmu_base);
> +void exynos_ppmu_stop(void __iomem *ppmu_base);
> +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
> +#endif /* __DEVFREQ_EXYNOS_PPMU_H */
> +
> --
> 1.7.8.6
>


\
 
 \ /
  Last update: 2013-02-03 17:21    [W:0.277 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site