lkml.org 
[lkml]   [2013]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core
Date
This patch adds all necessary header files and Kbuild plumbing for the
core driver for Silicon Laboratories Si476x series of AM/FM tuner
chips.

The driver as a whole is implemented as an MFD device and this patch
adds a core portion of it that provides all the necessary
functionality to the two other drivers that represent radio and audio
codec subsystems of the chip.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 4 +
include/linux/mfd/si476x-core.h | 525 +++++++++++++++++++++++++++++++++++++++
3 files changed, 541 insertions(+)
create mode 100644 include/linux/mfd/si476x-core.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1c0abd4..3cd8f21 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -970,6 +970,18 @@ config MFD_WL1273_CORE
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.

+config MFD_SI476X_CORE
+ tristate "Support for Silicon Laboratories 4761/64/68 AM/FM radio."
+ depends on I2C
+ select MFD_CORE
+ help
+ This is the core driver for the SI476x series of AM/FM
+ radio. This MFD driver connects the radio-si476x V4L2 module
+ and the si476x audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si476x-core.
+
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core and TLL driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8b977f8..ca87ae8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -131,6 +131,10 @@ obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
+
+si476x-core-y := si476x-cmd.o si476x-prop.o si476x-i2c.o
+obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
+
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
new file mode 100644
index 0000000..2136b26
--- /dev/null
+++ b/include/linux/mfd/si476x-core.h
@@ -0,0 +1,525 @@
+/*
+ * include/media/si476x-core.h -- Common definitions for si476x core
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ *
+ * Author: Andrey Smirnov <andrey.smirnov@convergeddevices.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef SI476X_CORE_H
+#define SI476X_CORE_H
+
+#include <linux/kfifo.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/videodev2.h>
+#include <linux/regulator/consumer.h>
+
+#include <media/si476x.h>
+
+/* Command Timeouts */
+#define SI476X_DEFAULT_TIMEOUT 100000
+#define SI476X_TIMEOUT_TUNE 700000
+#define SI476X_TIMEOUT_POWER_UP 330000
+#define SI476X_STATUS_POLL_US 0
+
+/* -------------------- si476x-i2c.c ----------------------- */
+
+enum si476x_freq_supported_chips {
+ SI476X_CHIP_SI4761 = 1,
+ SI476X_CHIP_SI4764,
+ SI476X_CHIP_SI4768,
+};
+
+enum si476x_mfd_cells {
+ SI476X_RADIO_CELL = 0,
+ SI476X_CODEC_CELL,
+ SI476X_MFD_CELLS,
+};
+
+/**
+ * enum si476x_power_state - possible power state of the si476x
+ * device.
+ *
+ * @SI476X_POWER_DOWN: In this state all regulators are turned off
+ * and the reset line is pulled low. The device is completely
+ * inactive.
+ * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
+ * turned on, reset line pulled high, IRQ line is enabled(polling is
+ * active for polling use scenario) and device is turned on with
+ * POWER_UP command. The device is ready to be used.
+ * @SI476X_POWER_INCONSISTENT: This state indicates that previous
+ * power down was inconsistent, meaning some of the regulators were
+ * not turned down and thus use of the device, without power-cycling
+ * is impossible.
+ */
+enum si476x_power_state {
+ SI476X_POWER_DOWN = 0,
+ SI476X_POWER_UP_FULL = 1,
+ SI476X_POWER_INCONSISTENT = 2,
+};
+
+/**
+ * struct si476x_core - internal data structure representing the
+ * underlying "core" device which all the MFD cell-devices use.
+ *
+ * @client: Actual I2C client used to transfer commands to the chip.
+ * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
+ * @cells: MFD cell devices created by this driver.
+ * @cmd_lock: Mutex used to serialize all the requests to the core
+ * device. This filed should not be used directly. Instead
+ * si476x_core_lock()/si476x_core_unlock() should be used to get
+ * exclusive access to the "core" device.
+ * @users: Active users counter(Used by the radio cell)
+ * @rds_read_queue: Wait queue used to wait for RDS data.
+ * @rds_fifo: FIFO in which all the RDS data received from the chip is
+ * placed.
+ * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
+ * @rds_drainer_is_working: Flag used for launching only one instance
+ * of the @rds_fifo_drainer.
+ * @rds_drainer_status_lock: Lock used to guard access to the
+ * @rds_drainer_is_working variable.
+ * @command: Wait queue for wainting on the command comapletion.
+ * @cts: Clear To Send flag set upon receiving first status with CTS
+ * set.
+ * @tuning: Wait queue used for wainting for tune/seek comand
+ * completion.
+ * @stc: Similar to @cts, but for the STC bit of the status value.
+ * @power_up_parameters: Parameters used as argument for POWER_UP
+ * command when the device is started.
+ * @state: Current power state of the device.
+ * @supplues: Structure containing handles to all power supplies used
+ * by the device (NULL ones are ignored).
+ * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
+ * @pinmux: Chip's configurable pins configuration.
+ * @diversity_mode: Chips role when functioning in diversity mode.
+ * @status_monitor: Polling worker used in polling use case scenarion
+ * (when IRQ is not avalible).
+ * @revision: Chip's running firmware revision number(Used for correct
+ * command set support).
+ */
+
+struct si476x_core {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ int chip_id;
+ struct mfd_cell cells[SI476X_MFD_CELLS];
+
+ struct mutex cmd_lock; /* for serializing fm radio operations */
+ atomic_t users;
+
+ wait_queue_head_t rds_read_queue;
+ struct kfifo rds_fifo;
+ struct work_struct rds_fifo_drainer;
+ bool rds_drainer_is_working;
+ struct mutex rds_drainer_status_lock;
+
+ wait_queue_head_t command;
+ atomic_t cts;
+
+ wait_queue_head_t tuning;
+ atomic_t stc;
+
+ struct si476x_power_up_args power_up_parameters;
+
+ enum si476x_power_state power_state;
+
+ struct regulator_bulk_data supplies[4];
+
+ int gpio_reset;
+
+ struct si476x_pinmux pinmux;
+ enum si476x_phase_diversity_mode diversity_mode;
+
+ atomic_t is_alive;
+
+ struct delayed_work status_monitor;
+#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
+ struct si476x_core, \
+ status_monitor)
+
+ int revision;
+
+ int rds_fifo_depth;
+};
+
+static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ return i2c_get_clientdata(client);
+}
+
+
+/**
+ * si476x_core_lock() - lock the core device to get an exclusive access
+ * to it.
+ */
+static inline void si476x_core_lock(struct si476x_core *core)
+{
+ mutex_lock(&core->cmd_lock);
+}
+
+/**
+ * si476x_core_unlock() - unlock the core device to relinquish an
+ * exclusive access to it.
+ */
+static inline void si476x_core_unlock(struct si476x_core *core)
+{
+ mutex_unlock(&core->cmd_lock);
+}
+
+/* *_TUNE_FREQ family of commands accept frequency in multiples of
+ 10kHz */
+static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
+{
+ u16 result;
+
+ switch (core->power_up_parameters.func) {
+ default:
+ case SI476X_FUNC_FM_RECEIVER:
+ result = freq / 10000;
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ result = freq / 1000;
+ break;
+ }
+
+ return result;
+}
+
+static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
+{
+ int result;
+
+ switch (core->power_up_parameters.func) {
+ default:
+ case SI476X_FUNC_FM_RECEIVER:
+ result = freq * 10000;
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ result = freq * 1000;
+ break;
+ }
+
+ return result;
+}
+
+/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
+ * mesures frequency in 62.5 Hz units */
+
+static inline int hz_to_v4l2(int freq)
+{
+ return (freq * 10) / 625;
+}
+
+static inline int v4l2_to_hz(int freq)
+{
+ return (freq * 625) / 10;
+}
+
+static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
+{
+ return hz_to_si476x(core, v4l2_to_hz(freq));
+}
+
+static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
+{
+ return hz_to_v4l2(si476x_to_hz(core, freq));
+}
+
+
+
+/**
+ * struct si476x_func_info - structure containing result of the
+ * FUNC_INFO command.
+ *
+ * @firmware.major: Firmware major number.
+ * @firmware.minor[...]: Firmware minor numbers.
+ * @patch_id:
+ * @func: Mode tuner is working in.
+ */
+struct si476x_func_info {
+ struct {
+ u8 major, minor[2];
+ } firmware;
+ u16 patch_id;
+ enum si476x_func func;
+};
+
+/**
+ * struct si476x_power_down_args - structure used to pass parameters
+ * to POWER_DOWN command
+ *
+ * @xosc: true - Power down, but leav oscillator running.
+ * false - Full power down.
+ */
+struct si476x_power_down_args {
+ bool xosc;
+};
+
+/**
+ * enum si476x_tunemode - enum representing possible tune modes for
+ * the chip.
+ * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
+ * channel after tune, tune status is valid.
+ * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
+ * channel after tune, tune status invalid.
+ * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
+ * metric thresholds are not met.
+ * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
+ * previous channel.
+ */
+enum si476x_tunemode {
+ SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
+ SI476X_TM_INVALIDATED_FAST_TUNE = 1,
+ SI476X_TM_VALIDATED_AF_TUNE = 2,
+ SI476X_TM_VALIDATED_AF_CHECK = 3,
+};
+
+/**
+ * enum si476x_smoothmetrics - enum containing the possible setting fo
+ * audio transitioning of the chip
+ * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
+ * new channel
+ * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
+ * channel values to the new values
+ */
+enum si476x_smoothmetrics {
+ SI476X_SM_INITIALIZE_AUDIO = 0,
+ SI476X_SM_TRANSITION_AUDIO = 1,
+};
+
+/**
+ * struct si476x_rds_status_report - the structure representing the
+ * response to 'FM_RD_STATUS' command
+ * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
+ * code has changed.
+ * @rdspiint: Program indentifiaction(PI) code has changed.
+ * @rdssyncint: RDS synchronization has changed.
+ * @rdsfifoint: RDS was received and the RDS FIFO has at least
+ * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
+ * @tpptyvalid: TP flag and PTY code are valid falg.
+ * @pivalid: PI code is valid flag.
+ * @rdssync: RDS is currently synchronized.
+ * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
+ * @tp: Current channel's TP flag.
+ * @pty: Current channel's PTY code.
+ * @pi: Current channel's PI code.
+ * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
+ * empty).
+ */
+struct si476x_rds_status_report {
+ bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
+ bool tpptyvalid, pivalid, rdssync, rdsfifolost;
+ bool tp;
+
+ u8 pty;
+ u16 pi;
+
+ u8 rdsfifoused;
+ u8 ble[4];
+
+ struct v4l2_rds_data rds[4];
+};
+
+struct si476x_rsq_status_args {
+ bool primary;
+ bool rsqack;
+ bool attune;
+ bool cancel;
+ bool stcack;
+};
+
+enum si476x_injside {
+ SI476X_INJSIDE_AUTO = 0,
+ SI476X_INJSIDE_LOW = 1,
+ SI476X_INJSIDE_HIGH = 2,
+};
+
+struct si476x_tune_freq_args {
+ bool zifsr;
+ bool hd;
+ enum si476x_injside injside;
+ int freq;
+ enum si476x_tunemode tunemode;
+ enum si476x_smoothmetrics smoothmetrics;
+ int antcap;
+};
+
+int si476x_core_stop(struct si476x_core *, bool);
+int si476x_core_start(struct si476x_core *, bool);
+int si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
+bool si476x_core_has_am(struct si476x_core *);
+bool si476x_core_has_diversity(struct si476x_core *);
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
+bool si476x_core_is_a_primary_tuner(struct si476x_core *);
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
+bool si476x_core_is_powered_up(struct si476x_core *core);
+
+enum si476x_i2c_type {
+ SI476X_I2C_SEND,
+ SI476X_I2C_RECV
+};
+
+int si476x_core_i2c_xfer(struct si476x_core *,
+ enum si476x_i2c_type,
+ char *, int);
+
+
+/* -------------------- si476x-cmd.c ----------------------- */
+
+int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
+int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
+int si476x_core_cmd_get_property(struct si476x_core *, u16);
+int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
+ enum si476x_dclk_config,
+ enum si476x_dfs_config,
+ enum si476x_dout_config,
+ enum si476x_xout_config);
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
+ enum si476x_iqclk_config,
+ enum si476x_iqfs_config,
+ enum si476x_iout_config,
+ enum si476x_qout_config);
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
+ enum si476x_icin_config,
+ enum si476x_icip_config,
+ enum si476x_icon_config,
+ enum si476x_icop_config);
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
+ enum si476x_lrout_config);
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
+ enum si476x_a1_config);
+int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
+int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
+int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
+ struct si476x_rds_status_report *);
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
+ struct si476x_rds_blockcount_report *);
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
+ struct si476x_tune_freq_args *);
+int si476x_core_cmd_am_tune_freq(struct si476x_core *,
+ struct si476x_tune_freq_args *);
+int si476x_core_cmd_am_rsq_status(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+int si476x_core_cmd_power_up(struct si476x_core *,
+ struct si476x_power_up_args *);
+int si476x_core_cmd_power_down(struct si476x_core *,
+ struct si476x_power_down_args *);
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
+ enum si476x_phase_diversity_mode);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *,
+ struct si476x_acf_status_report *);
+int si476x_core_cmd_am_acf_status(struct si476x_core *,
+ struct si476x_acf_status_report *);
+int si476x_core_cmd_agc_status(struct si476x_core *,
+ struct si476x_agc_status_report *);
+
+enum si476x_power_grid_type {
+ SI476X_POWER_GRID_50HZ = 0,
+ SI476X_POWER_GRID_60HZ,
+};
+
+/* Properties */
+
+enum si476x_interrupt_flags {
+ SI476X_STCIEN = (1 << 0),
+ SI476X_ACFIEN = (1 << 1),
+ SI476X_RDSIEN = (1 << 2),
+ SI476X_RSQIEN = (1 << 3),
+
+ SI476X_ERRIEN = (1 << 6),
+ SI476X_CTSIEN = (1 << 7),
+
+ SI476X_STCREP = (1 << 8),
+ SI476X_ACFREP = (1 << 9),
+ SI476X_RDSREP = (1 << 10),
+ SI476X_RSQREP = (1 << 11),
+};
+
+enum si476x_rdsint_sources {
+ SI476X_RDSTPPTY = (1 << 4),
+ SI476X_RDSPI = (1 << 3),
+ SI476X_RDSSYNC = (1 << 1),
+ SI476X_RDSRECV = (1 << 0),
+};
+
+enum si476x_status_response_bits {
+ SI476X_CTS = (1 << 7),
+ SI476X_ERR = (1 << 6),
+ /* Status response for WB receiver */
+ SI476X_WB_ASQ_INT = (1 << 4),
+ SI476X_RSQ_INT = (1 << 3),
+ /* Status response for FM receiver */
+ SI476X_FM_RDS_INT = (1 << 2),
+ SI476X_ACF_INT = (1 << 1),
+ SI476X_STC_INT = (1 << 0),
+};
+
+/* -------------------- si476x-prop.c ----------------------- */
+
+enum si476x_common_receiver_properties {
+ SI476X_PROP_INT_CTL_ENABLE = 0x0000,
+ SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE = 0x0200,
+ SI476X_PROP_DIGITAL_IO_INPUT_FORMAT = 0x0201,
+ SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE = 0x0202,
+ SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT = 0x0203,
+
+ SI476X_PROP_SEEK_BAND_BOTTOM = 0x1100,
+ SI476X_PROP_SEEK_BAND_TOP = 0x1101,
+ SI476X_PROP_SEEK_FREQUENCY_SPACING = 0x1102,
+
+ SI476X_PROP_VALID_MAX_TUNE_ERROR = 0x2000,
+ SI476X_PROP_VALID_SNR_THRESHOLD = 0x2003,
+ SI476X_PROP_VALID_RSSI_THRESHOLD = 0x2004,
+};
+
+enum si476x_am_receiver_properties {
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER = 0x0303,
+};
+
+enum si476x_fm_receiver_properties {
+ SI476X_PROP_AUDIO_DEEMPHASIS = 0x0302,
+
+ SI476X_PROP_FM_RDS_INTERRUPT_SOURCE = 0x4000,
+ SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT = 0x4001,
+ SI476X_PROP_FM_RDS_CONFIG = 0x4002,
+};
+
+enum si476x_prop_audio_pwr_line_filter_bits {
+ SI476X_PROP_PWR_HARMONICS_MASK = 0b0000000000011111,
+ SI476X_PROP_PWR_GRID_MASK = 0b0000000100000000,
+ SI476X_PROP_PWR_ENABLE_MASK = 0b0000001000000000,
+ SI476X_PROP_PWR_GRID_50HZ = 0b0000000000000000,
+ SI476X_PROP_PWR_GRID_60HZ = 0b0000000100000000,
+};
+
+enum si476x_prop_fm_rds_config_bits {
+ SI476X_PROP_RDSEN_MASK = 0x1,
+ SI476X_PROP_RDSEN = 0x1,
+};
+
+
+struct regmap *devm_regmap_init_si476x(struct si476x_core *);
+
+#endif /* SI476X_CORE_H */
--
1.7.10.4


\
 
 \ /
  Last update: 2013-02-27 07:41    [W:0.156 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site