lkml.org 
[lkml]   [2013]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 0/6] Add ChromeOS Embedded Controller support
From
Hi Samuel,

On Mon, Feb 25, 2013 at 2:08 PM, Simon Glass <sjg@chromium.org> wrote:
> The ChromeOS Embedded Controller (EC) is an Open Source EC implementation
> used on ARM and Intel Chromebooks. Current implementations use a Cortex-M3
> connected on a bus (such as I2C, SPI, LPC) to the AP. A separate interrupt
> line is used to indicate when the EC needs service.
>
> Functions performed by the EC vary by platform, but typically include
> battery charging, keyboard scanning and power sequencing.
>
> This series includes support for the EC message protocol, and implements
> a matrix keyboard handler for Linux using the protocol. The EC performs
> key scanning and passes scan data in response to AP requests. This is
> used on the Samsung ARM Chromebook. No driver is available for LPC at
> present.
>
> This series can in principle operate on any hardware, but for it to actually
> work on the Samsung ARM Chromebook, it needs patches which are currently in
> progress to mainline: Exynos FDT interrupt support and I2C bus arbitration.
>
> The driver is device-tree-enabled and a suitable binding is included in
> this series. Example device tree nodes are included in the examples,
> but no device tree patch for exynos5250-snow is provided at this stage, since
> we must wait for the above-mentioned patches to land to avoid errors from
> dtc. This can be added with a follow-on patch when that work is complete.
>

Are you happy with this series? Do you think it is ready to be picked
up for mfd?

Regards,
Simon

> Changes in v6:
> - Allow cros_ec to be a module
> - Remove 'struct i2c_msg' definition
> - Use %ph instead of for loop to output packet trace
> - Fix incorrect indentation in cros_ec_keyb_process()
> - Remove unnecessary assignment to NULL in probe function
>
> Changes in v5:
> - Remove cros_ec allocation functions
> - Remove name access functions in cros_ec, using strings instead
> - Fix Kconfig help message for MFD_CROS_EC_I2C
> - Remove I2C retry logic
> - Switch cros_ec_i2c driver to use devm
> - Update cros_ec_i2c to work with new cros_ec interface
> - Switch cros_ec_spi driver to use devm
> - Update cros_ec_spi to work with new cros_ec interface
> - Fix {} style nit in cros_ec_keyb_has_ghosting
> - Correct key lookup logic which was broken in previous version
> - Switch cros_ec_keyb driver to use devm
>
> Changes in v4:
> - Fix up trvial logging comments
> - Remove messages reporting out of memory
> - Add compatible string for cros-ec-keyb
> - Remove wake notifier and let drivers use their own handlers instead
> - Add 'depends on MFD_CROS_EC' to Kconfig
> - Remove use of wake_notifier
> - Remove manual code to locate device tree node
> - Add resume handler to clear keyboard scan buffer if required
>
> Changes in v3:
> - Add stub for matrix_keypad_parse_of_params() when no CONFIG_OF
> - Put back full DT range checking in tca8418 driver
> - Remove 'select MFD_CROS_EC' from Kconfig as it isn't necessary
> - Remove old_state by using input layer's idev->key
> - Move inner loop of cros_ec_keyb_has_ghosting() into its own function and simplify
> - Add check for not finding the device tree node
> - Remove comment about leaking matrix_keypad_build_keymap()
> - Use platform_get_drvdata() where possible
> - Remove call to input_free_device() after input_unregister_device()
>
> Changes in v2:
> - Remove use of __devinit/__devexit
> - Remove use of __devinit/__devexit
> - Remove use of __devinit/__devexit
> - Add new patch to decode matrix-keypad DT binding
> - Remove use of __devinit/__devexit
> - Use function to read matrix-keypad parameters from DT
> - Remove key autorepeat parameters from DT binding and driver
> - Use unsigned int for rows/cols
>
> Simon Glass (6):
> mfd: Add ChromeOS EC messages header
> mfd: Add ChromeOS EC implementation
> mfd: Add ChromeOS EC I2C driver
> mfd: Add ChromeOS EC SPI driver
> Input: matrix-keymap: Add function to read the new DT binding
> Input: Add ChromeOS EC keyboard driver
>
> .../devicetree/bindings/input/cros-ec-keyb.txt | 72 +
> Documentation/devicetree/bindings/mfd/cros-ec.txt | 56 +
> drivers/input/keyboard/Kconfig | 12 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/cros_ec_keyb.c | 334 +++++
> drivers/input/keyboard/lpc32xx-keys.c | 11 +-
> drivers/input/keyboard/omap4-keypad.c | 16 +-
> drivers/input/keyboard/tca8418_keypad.c | 7 +-
> drivers/input/matrix-keymap.c | 19 +
> drivers/mfd/Kconfig | 28 +
> drivers/mfd/Makefile | 3 +
> drivers/mfd/cros_ec.c | 189 +++
> drivers/mfd/cros_ec_i2c.c | 206 +++
> drivers/mfd/cros_ec_spi.c | 375 ++++++
> include/linux/input/matrix_keypad.h | 19 +
> include/linux/mfd/cros_ec.h | 170 +++
> include/linux/mfd/cros_ec_commands.h | 1369 ++++++++++++++++++++
> 17 files changed, 2869 insertions(+), 18 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/cros-ec-keyb.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/cros-ec.txt
> create mode 100644 drivers/input/keyboard/cros_ec_keyb.c
> create mode 100644 drivers/mfd/cros_ec.c
> create mode 100644 drivers/mfd/cros_ec_i2c.c
> create mode 100644 drivers/mfd/cros_ec_spi.c
> create mode 100644 include/linux/mfd/cros_ec.h
> create mode 100644 include/linux/mfd/cros_ec_commands.h
>
> --
> 1.8.1.3
>


\
 
 \ /
  Last update: 2013-02-27 06:43    [W:0.113 / U:1.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site