Messages in this thread | | | From | Arnd Bergmann <> | Subject | [GIT PULL 00/09] arm-soc: changes for 3.9 | Date | Thu, 21 Feb 2013 21:12:20 +0000 |
| |
Hi Linus,
Here is the usual arm-soc set of pull requests. There is a total of 645 non-merge changesets, which this time is dominated by the sh-mobile platform cleanups in size. In the effort to modernize the way that ARM platform code is structured, sh-mobile has been a little late to the game, but they are making up for that now.
Another topic that keeps both the patch count and the total number of changed lines high is the work to remove platform specific header files. This will keep going on for at least one or two releases I fear, but we are already seeing the fruits of it, and now have a total of 18 platforms that started out separately and can now be built as 'multiplatform' together with others.
We have reduced the number of separate branches for you a bit, trying to make things easier for us, and getting fewer conflicts between the arm-soc branches. These nine branches contain all the important changes, but there are three more branches with stuff that came late before the merge window. If everything goes well, we will send pull requests for those next week, or leave them for 3.10 if there are problems.
Olof has done almost all the merges again for this round, since I was on parental leave for half the time, but I'm sending out the pull requests now since he is currently at ELC.
The merge conflicts I mention in the tags are all for conflicts between the arm-soc branches. There are a few more conflicts with other stuff you already pulled, but it all looks simple as well. I have uploaded a 'for-linus' branch to the arm-soc tree with the resolutions I used.
Arnd
Dirstat: 0.4% Documentation/devicetree/bindings/ 2.3% arch/arm/boot/dts/ 0.7% arch/arm/common/ 0.9% arch/arm/include/asm/ 0.3% arch/arm/include/ 0.4% arch/arm/kernel/ 4.5% arch/arm/kvm/ 0.3% arch/arm/mach-at91/ 2.6% arch/arm/mach-imx/ 0.7% arch/arm/mach-nomadik/ 3.0% arch/arm/mach-omap2/ 0.8% arch/arm/mach-prima2/ 0.4% arch/arm/mach-s3c2440/ 1.1% arch/arm/mach-s3c24xx/include/mach/ 4.7% arch/arm/mach-s3c24xx/ 0.5% arch/arm/mach-s3c64xx/ 0.3% arch/arm/mach-s5p64x0/ 8.9% arch/arm/mach-shmobile/ 5.8% arch/arm/mach-tegra/ 1.1% arch/arm/mach-u300/ 2.5% arch/arm/plat-s3c24xx/ 3.6% arch/arm/ 4.8% arch/sh/kernel/cpu/sh2a/ 1.0% arch/sh/kernel/cpu/sh3/ 11.1% arch/sh/kernel/cpu/sh4a/ 0.3% arch/ 4.1% drivers/clk/tegra/ 0.7% drivers/clocksource/ 1.2% drivers/dma/ 1.0% drivers/irqchip/ 26.3% drivers/pinctrl/sh-pfc/ 0.7% drivers/sh/pfc/ 0.6% drivers/ 0.5% include/linux/
Aaro Koskinen (1): ARM: OMAP1: nokia770: enable CBUS/Retu
Abhilash Kesavan (1): ARM: SAMSUNG: Gracefully exit on suspend failure
Alexander Shiyan (1): ARM: S3C24XX: Fix compile breakage for SMDK2410
Alexey Galakhov (1): ARM: S5PV210: Fix early uart output in fifo mode
Andrea Adami (1): ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock
Andrew Lunn (2): ARM: Kirkwood: Cleanup unneeded include files cpuidle: kirkwood: Move out of mach directory
André Hentschel (1): ARM: OMAP2+: Include soc.h to drm.c to fix compiling
AnilKumar Ch (1): ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
Arnd Bergmann (31): mfd/vexpress: vexpress_sysreg_setup must not be __init ARM: msm: proc_comm_boot_wait should not be __init ARM: prima2: fix __init section for cpu hotplug ARM: kirkwood: add missing include for nsa310 ARM: disable virt_to_bus/virt_to_bus almost everywhere ARM: samsung: fix assembly syntax for new gas ARM: w90x900: fix legacy assembly syntax ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: sa1100: don't warn about mach/ide.h ARM: integrator/versatile: fix NOMMU warnings ARM: integrator: fix build with INTEGRATOR_AP off ARM: pick Versatile by default for !MMU ARM: mvebu: allow selecting mvebu without Armada XP ARM: s3c: i2c: add platform_device forward declaration scripts/sortextable: silence script output Merge branch 'warning-fixes' into next/fixes-non-critical [media] davinci: do not include mach/hardware.h remoteproc: omap: depend on OMAP_MBOX_FWK net: cwdavinci_cpdma: export symbols for cpsw Merge branch 'omap/multiplatform-fixes', tag 'v3.8-rc5' into next/multiplatform ARM: arch_timer: include linux/errno.h ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350 Merge tag 'renesas-pinmux2-for-v3.9' of git://git.kernel.org/.../horms/renesas into next/sh-pinmux Merge tag 'renesas-soc5-for-v3.9' of git://git.kernel.org/.../horms/renesas into next/soc Merge tag 'cleanup_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux into next/cleanup Merge tag 'omap-for-v3.9/usb-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc Revert "sunxi: a13-olinuxino: Add user LED to the device tree" Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" Merge tag 'tegra-for-3.9-soc-ccf-fixes' of git://git.kernel.org/.../swarren/linux-tegra into next/dt Merge tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical ARM: prima2: remove duplicate v7_invalidate_l1
Barry Song (10): ARM: PRIMA2: add CSR SiRFmarco device tree .dts ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig ARM: PRIMA2: initialize l2x0 according to mach from DT ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco ARM: PRIMA2: rstc: enable the support for Marco ARM: PRIMA2: rtciobg: it is also compatible with marco ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for Marco ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
Bastian Hecht (4): ARM: shmobile: sh73a0: Add CPU sleep suspend ARM: shmobile: r8a7740: Add CPU sleep suspend ARM: SH-Mobile: sh73a0: Secondary CPUs handle own SCU flags ARM: SH-Mobile: sh73a0: Add CPU Hotplug
Bryan Wu (3): ARM: DT: tegra: Unify the description of Tegra20 boards ARM: DT: tegra: Add board level compatible properties ARM: DT: tegra: Add Tegra30 Beaver board support
Catalin Marinas (1): arm: Move sp810.h to include/linux/amba/
Chen Gang (3): ARM: SAMSUNG: using vsnprintf instead of vsprintf for the limit buffer length 256 ARM: OMAP: Fix the use of uninitialized dma_lch_count ARM: OMAP2+: using strlcpy instead of strncpy
Christoffer Dall (16): ARM: Add page table and page defines needed by KVM ARM: Section based HYP idmap KVM: ARM: Initial skeleton to compile KVM support KVM: ARM: Hypervisor initialization KVM: ARM: Memory virtualization setup KVM: ARM: Inject IRQs and FIQs from userspace KVM: ARM: World-switch implementation KVM: ARM: Emulation framework and CP15 emulation KVM: ARM: User space API for getting/setting co-proc registers KVM: ARM: Demux CCSIDR in the userspace API KVM: ARM: Handle guest faults in KVM KVM: ARM: Handle I/O aborts KVM: ARM: Add maintainer entry for KVM/ARM ARM: gic: add missing distributor defintions KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl ARM: KVM: VGIC accept vcpu and dist base addresses from user space
Cong Ding (1): ARM: S3C24XX: fix uninitialized variable warning
Daniel Mack (5): ARM: OMAP: gpmc: don't create devices from initcall on DT mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc-nand: drop __init annotation ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
Dinh Nguyen (4): arm: socfpga: Add new device tree source for actual socfpga HW arm: socfpga: Add entries to enable make dtbs socfpga arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add SMP support for actual socfpga harware
Dom Cobley (1): ARM: bcm2835: add a pm_power_off implementation
Douglas Gilbert (1): ARM: at91/at91sam9x5.dtsi: fix usart3 TXD
Emilio López (1): sunxi: a10-cubieboard: Add user LEDs to the device tree
Ezequiel Garcia (4): ARM: OMAP2+: gpmc: Remove unneeded of_node_put() mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: gpmc-onenand: drop __init annotation ARM: OMAP2+: gpmc: add DT bindings for OneNAND
Fabio Baltieri (2): clocksource: nomadik-mtu: support timer-based delay cpufreq: db8500: set CPUFREQ_CONST_LOOPS
Fabio Estevam (10): ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT ARM: Let CONFIG_MACH_IMX31_DT be built by default ARM: clk-imx31: Add dummy clock ARM: mx31: Replace clk_register_clkdev with clock DT lookup ARM: clk-imx35: Fix build warnings with W=1 ARM: imx: Remove mach-mx51_3ds board ARM: imx: Remove mx508 support ARM: imx_v6_v7_defconfig: Select IPUV3 driver ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: imx_v4_v5_defconfig: Add VPU support
Frank Li (1): ARM: dts: imx6: fix fec ptp clock slow 10 time
Gerlando Falauto (1): arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
Giridhar Maruthy (1): ARM: dts: fix tick and alarm irq numbers for exynos5440
Gregory CLEMENT (2): arm: mvebu: i2c come back in defconfig rtc: Add support of rtc-mv for MVEBU SoCs
Guennadi Liakhovetski (4): ARM: mackerel: include the correct .dtsi file ARM: sh7372: add clock lookup entries for DT-based devices ARM: sh7372: fix cache clean / invalidate order ARM: shmobile: add function declarations for sh7372 DT helper functions
Gwenhael Goavec-Merou (2): ARM: imx27: add a clock gate to activate SPLL clock ARM: imx27: clk-imx27: SPI: Rename IPG clock and add PER clock
Heiko Stuebner (11): ARM: S3C24XX: transform irq handling into a declarative form ARM: S3C24XX: Move irq syscore-ops to irq-pm ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: let S3C2412_PM select S3C2412_PM_SLEEP ARM: S3C24XX: add missing platform_device.h include for osiris
Hideki EIRAKU (1): ARM: shmobile: armadillo800eva: set clock rates before timer init
Hiroshi Doyu (17): clocksource: tegra: cosmetic: Fix error message ARM: tegra: Make variables static ARM: tegra: Add CPU nodes to Tegra20 device tree ARM: tegra: Add CPU nodes to Tegra30 device tree ARM: tegra: Use DT /cpu node to detect number of CPU core ARM: Add API to detect SCU base address from CP15 ARM: tegra: Skip scu_enable(scu_base) if not Cortex A9 ARM: tegra: fuse: Add chip ID Tegra114 0x35 ARM: dt: tegra114: Add new SoC base, Tegra114 SoC ARM: dt: tegra114: Add new board, Dalmore ARM: dt: tegra114: Add new board, Pluto ARM: tegra: Add initial support for Tegra114 SoC. ARM: tegra: add AHB entry to Tegra114 DT ARM: dt: tegra20: Rename "gart" to "iommu" ARM: dt: tegra30: Rename "smmu" to "iommu" ARM: tegra: Add SMMU entry to Tegra114 DT ARM: tegra: Fix build error for gic update
Igor Grinberg (2): ARM: PXA3xx: program the CSMSADRCFG register ARM: OMAP3: cm-t3517: add MMC support
Jason Cooper (4): ARM: kirkwood: nsa310: cleanup includes and unneeded code Merge tag 'tags/mvebu_fixes_for_v3.8-rc6' into mvebu/drivers ARM: kirkwood: nsa310: cleanup includes and unneeded code ARM: mvebu: correct gated clock documentation
Jason Gunthorpe (1): ARM: Kirkwood: Support basic hotplug for PCI-E
Javier Martinez Canillas (4): ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: imx: configs: enable netfilter support
Jean Pihet (1): ARM: OMAP2+: powerdomain: fix powerdomain trace integration
Jean-Christophe PLAGNIOL-VILLARD (1): ARM: at91: Animeo IP: enable watchdog support
Jean-Francois Moine (1): Dove: activate GPIO interrupts in DT
Joachim Eastwood (4): ARM: at91: fix board-rm9200-dt after sys_timer conversion ARM: at91: add MMC bindings to RM9200 DT ARM: at91: add SSC bindings to RM9200 DT ARM: at91: add EMAC bindings to RM9200 DT
Jon Hunter (2): ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: Fix selection of clockevent timer when using device-tree
Jonas Aaberg (1): cpufreq: dbx500: Minor code cleanup
Joseph Lo (14): ARM: tegra30: fix power up sequence for boot_secondary ARM: tegra: update the cache maintenance order for CPU shutdown ARM: tegra: moving the clock gating procedure to tegra_cpu_kill ARM: tegra: clean up the CPUINIT section ARM: tegra: make device can run on UP ARM: tegra30: make the wait time of CPU power up to proportional to HZ ARM: tegra: fix compile error when disable CPU_IDLE ARM: tegra: add pending SGI checking API ARM: tegra20: cpuidle: add powered-down state for secondary CPU clk: tegra20: Implementing CPU low-power function for tegra_cpu_car_ops ARM: tegra20: flowctrl: add support for cpu_suspend_enter/exit ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down mode ARM: tegra: add Tegra114 ARM_CPUIDLE_WFI_STATE support clk: tegra: fix wrong clock index between se to sata_cold
Josh Cartwright (2): ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB ARM: multi_v7_defconfig: add ARCH_ZYNQ
Josh Wu (2): ARM: at91: at91sam9x5: add DT parameters to enable PMECC ARM: at91: at91sam9n12: add DT parameters to enable PMECC
Kim Milo (2): ARM: OMAP2+: craneboard: support NAND device ARM: OMAP2+: craneboard: support the TPS65910 PMU
Kukjin Kim (36): cpufreq: exynos: cleanup exynos-cpufreq header ARM: S5P64X0: remove gpiolib.c file in mach-s5p64x0 ARM: S5P64X0: move i2c.h into local directory ARM: S5P64X0: move s5p64x0-clock.h into local directory ARM: S5PV210: move regs-sys.h into setup-usb-phy.c file ARM: EXYNOS: move mach/pmu.h file into common.h ARM: SAMSUNG: cleanup mach/regs-audss.h file ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local ARM: S3C24XX: make gta02.h local ARM: S3C24XX: make h1940.h and h1940-latch.h local ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local ARM: S3C24XX: make otom-map.h local ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h ARM: S3C2412: cleanup regs-s3c2412.h ARM: S3C24XX: remove idle.h ARM: S3C24XX: remove dsc.c and make regs-dsc.h local ARM: S3C64XX: make crag6410.h local ARM: S3C64XX: make regs-gpio-memport.h local ARM: S3C64XX: make regs-modem.h local ARM: S3C64XX: make regs-srom.h local ARM: S3C64XX: make regs-sys.h local ARM: S3C64XX: make regs-syscon-power.h local ARM: S3C24XX: Move mach-s3c2410/ cpufreq into mach-s3c24xx/ ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/ ARM: S3C2412: Remove useless codes mach-s3c2412/gpio.c ARM: S3C24XX: Move mach-s3c2412/ cpufreq driver into mach-s3c24xx/ ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into mach-s3c24xx/ ARM: S3C24XX: Move mach-s3c2440/ pll into mach-s3c24xx/ ARM: dts: fix compatible value for exynos pinctrl ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-mem.h local
Kumar, Anil (5): ARM: davinci: da850: add pinctrl driver DT entries ARM: davinci: da850: add NAND driver DT entries ARM: davinci: da8xx defconfig: enable pinctrl config option ARM: davinci: da850: add wdt DT node ARM: davinci: da850 DT: add support for machine reboot
Kuninori Morimoto (6): ARM: shmobile: fix sample amixer settings for mackerel ARM: shmobile: add sample amixer settings for ap4evb ARM: shmobile: add sample amixer settings for armadillo800eva ARM: shmobile: r8a7740: add TMU timer support ARM: shmobile: sh73a0: fixup div4_clks bitmap ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED()
Kyungmin Park (1): ARM: OMAP2+: Remove apollon board support
Lad, Prabhakar (1): ARM: davinci: da850: move interrupt-parent property to soc node
Laurent Pinchart (90): sh: sh7264: Rename CRX0CRX1 mark to match GPIO names sh: sh7269: Rename CRX0CRX1(CRX2) marks to match GPIO names sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPD sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries sh: sh7786: Fix port E, G and J GPIOs sh: sh7786: Fix last GPIO index sh: shx3: Fix last GPIO index sh-pfc: Split platform data from the sh_pfc structure sh-pfc: Move private definitions and declarations to private header sh-pfc: Merge PFC core and pinctrl sh-pfc: Merge PFC core and gpio sh-pfc: Move platform device and driver to the core sh-pfc: Use devm_kzalloc() sh-pfc: Use devm_ioremap_nocache() sh-pfc: Let the compiler decide whether to inline functions sh-pfc: Remove check for impossible error condition sh-pfc: Sort headers alphabetically sh-pfc: Use sh_pfc_ namespace prefix through the whole driver sh-pfc: Split platform device and platform driver registration sh-pfc: Support passing resources through platform device ARM: shmobile: Select PINCTRL ARM: shmobile: r8a7740: Register PFC platform device ARM: shmobile: r8a7779: Register PFC platform device ARM: shmobile: sh7372: Register PFC platform device ARM: shmobile: sh73a0: Register PFC platform device ARM: shmobile: r8a7740: Add pin control resources ARM: shmobile: sh7372: Add pin control resources ARM: shmobile: sh73a0: Add pin control resources sh: Add PFC platform device registration helper function sh: sh7203: Register PFC platform device sh: sh7264: Register PFC platform device sh: sh7269: Register PFC platform device sh: sh7720: Register PFC platform device sh: sh7722: Register PFC platform device sh: sh7723: Register PFC platform device sh: sh7724: Register PFC platform device sh: sh7734: Register PFC platform device sh: sh7757: Register PFC platform device sh: sh7785: Register PFC platform device sh: sh7786: Register PFC platform device sh: shx3: Register PFC platform device sh-pfc: Remove platform device registration sh-pfc: Remove unused resource and num_resources platform data fields sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ sh-pfc: Support pinmux info in driver data instead of platform data sh-pfc: Add r8a7740 pinmux support sh-pfc: Add r8a7779 pinmux support sh-pfc: Add sh7372 pinmux support sh-pfc: Add sh73a0 pinmux support sh-pfc: Add sh7203 pinmux support sh-pfc: Add sh7264 pinmux support sh-pfc: Add sh7269 pinmux support sh-pfc: Add sh7720 pinmux support sh-pfc: Add sh7722 pinmux support sh-pfc: Add sh7723 pinmux support sh-pfc: Add sh7724 pinmux support sh-pfc: Add sh7734 pinmux support sh-pfc: Add sh7757 pinmux support sh-pfc: Add sh7785 pinmux support sh-pfc: Add sh7786 pinmux support sh-pfc: Add shx3 pinmux support ARM: shmobile: r8a7740: Use driver-provided pinmux info ARM: shmobile: r8a7779: Use driver-provided pinmux info ARM: shmobile: sh7372: Use driver-provided pinmux info ARM: shmobile: sh73a0: Use driver-provided pinmux info sh: sh7203: pinmux: Use driver-provided pinmux info sh: sh7264: pinmux: Use driver-provided pinmux info sh: sh7269: pinmux: Use driver-provided pinmux info sh: sh7720: pinmux: Use driver-provided pinmux info sh: sh7722: pinmux: Use driver-provided pinmux info sh: sh7723: pinmux: Use driver-provided pinmux info sh: sh7724: pinmux: Use driver-provided pinmux info sh: sh7734: pinmux: Use driver-provided pinmux info sh: sh7757: pinmux: Use driver-provided pinmux info sh: sh7785: pinmux: Use driver-provided pinmux info sh: sh7786: pinmux: Use driver-provided pinmux info sh: shx3: pinmux: Use driver-provided pinmux info sh: Remove unused sh_pfc_register_info() function sh-pfc: Remove pinmux_info definition sh-pfc: Move sh_pfc.h from include/linux/ to driver directory ARM: shmobile: kzm9g: Use of_machine_is_compatible() ARM: shmobile: Include sh73a0 DTSI in kzm9g ARM: shmobile: ag5evm: Use gpio_request_one() ARM: shmobile: ap4evb: Use gpio_request_one() ARM: shmobile: armadillo800eva: Use gpio_request_one() ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value ARM: shmobile: kota2: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: mackerel: Use gpio_request_one()
Laxman Dewangan (12): ARM: tegra: defconfig updates ARM: tegra30: tegra30 gpio is not compatible with tegra20 gpio ARM: tegra: dts: add aliases and DMA requestor for serial controller ARM: tegra: add DT entry for KBC controller ARM: tegra: seaboard: enable keyboard in DT ARM: tegra: cardhu: register UARTC ARM: tegra: whistler: enable keyboard in DT ARM: tegra: harmony: enable keyboard in DT ARM: tegra114: select PINCTRL for Tegra114 SoC ARM: DT: tegra114: add GPIO DT entry ARM: DT: tegra114: add pinmux DT entry clk: tegra: initialise parent of uart clocks
Lee Jones (5): cpufreq: Give driver used for dbx500 family a more generic name mfd: db8500: Update cpufreq device name cpufreq: dbx500: Update file header ARM: ux500: Disable Power Supply and Battery Management by default ARM: ux500: Fix u9540 booting issues
Linus Walleij (24): dma: coh901318: create a proper platform data file dma: coh901318: push platform data into driver dma: coh901318: remove hardcoded target addresses dma: coh901318: skip hard-coded addresses dma: coh901318: push header down into the DMA subsystem dma: coh901318: push definitions into driver dma: coh901318: merge header files dma: coh901318: cut down on platform data abstraction ARM: nomadik: move last custom calls to pinctrl ARM: nomadik: initial devicetree support ARM: nomadik: move pin maps to cpu file ARM: nomadik: move remaining PrimeCells to device tree ARM: nomadik: add FSMC NAND ARM: nomadik: move GPIO and pinctrl to device tree ARM: nomadik: convert SMSC91x ethernet to device tree ARM: nomadik: migrate MMC/SD card support to device tree ARM: nomadik: add I2C devices to the device tree ARM: nomadik: delete old board files ARM: nomadik: get rid of <mach/hardware.h> mfd: prcmu: delete pin control helpers ARM: ux500: de-globalize <mach/id.h> ARM: nomadik: fix OF compilation regression drivers/db8500-cpufreq: delete dangling include mfd: db8500-prcmu: update resource passing
Lucas Stach (4): ASoC: tegra: add ac97 host controller to device tree ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi ARM: tegra: Add Colibri T20 512MB COM device tree ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM
Magnus Damm (3): ARM: mach-shmobile: sh73a0 external IRQ wake update ARM: shmobile: Register ARM architected timer sh-pfc: sh_pfc_probe() sizeof() fix
Marc Zyngier (19): KVM: ARM: Power State Coordination Interface implementation Merge remote-tracking branch 'arm-soc/irqchip/gic-vic-move' into kvm-arm/vgic ARM: arch_timers: switch to physical timers if HYP mode is available ARM: Dummy Virtual Machine platform support ARM: gic: define GICH offsets for VGIC support ARM: gic: add __ASSEMBLY__ guard to C definitions ARM: KVM: Keep track of currently running vcpus ARM: KVM: Initial VGIC infrastructure code ARM: KVM: VGIC distributor handling ARM: KVM: VGIC virtual CPU interface management ARM: KVM: vgic: retire queued, disabled interrupts ARM: KVM: VGIC interrupt injection ARM: KVM: VGIC control interface world switch ARM: KVM: VGIC initialisation code ARM: KVM: Add VGIC configuration option Merge branch 'for-arm-soc/arch-timers' of git://git.kernel.org/.../will/linux into kvm-arm/timer ARM: KVM: arch_timers: Add guest timer core support ARM: KVM: arch_timers: Add timer world switch ARM: KVM: arch_timers: Wire the init code and config option
Marek Vasut (2): ARM: mxs: Enable touchscreen on m28evk ARM: mxs: Update mxs_defconfig
Mark Jackson (1): ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
Mark Rutland (18): ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts arm: arch_timer: balance device_node refcounting arm: arch_timer: remove redundant available check arm: arch_timer: use u64/u32 for register data arm: arch_timer: standardise counter reading arm: arch_timer: split cntfrq accessor arm: arch_timer: factor out register accessors arm: arch_timer: add isbs to register accessors arm: arch_timer: divorce from local_timer api arm: arch_timer: add arch_counter_set_user_access arm: arch_timer: move core to drivers/clocksource arm64: arm_generic: prevent reading stale time arm64: move from arm_generic to arm_arch_timer Documentation: Add ARMv8 to arch_timer devicetree clockevents: Add generic timer broadcast receiver clockevents: Add generic timer broadcast function arm: Use generic timer broadcast receiver arm: Add generic timer broadcast support
Marko Katic (1): ARM: pxa: Minor naming fixes in spitz.c
Maxime Coquelin (1): ARM: ux500: Introduce cpu_is_u8580()
Maxime Ripard (10): ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree ARM: sunxi: Add device tree for Miniand Hackberry ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support ARM: dts: cfa10049: Change the SPI3 bus to spi-gpio ARM: dts: mxs: Add muxing options for the third PWM ARM: dts: mxs: Add the LCD to the 10049 board ARM: mxs: dts: Add gpio-keys for the rotary to the CFA-10049 ARM: mxs: dts: Add rotary encoder to the CFA-10049 sunxi: Cleanup the reset code and add meaningful registers defines sunxi: a13-olinuxino: Add user LED to the device tree
Michal Simek (3): arm: zynq: Add missing irqchip.h to common.c arm: zynq: Add missing irqchip.h to common.c MAINTAINERS: Add ARM/Zynq architecture entry
Mike Dunn (4): ARM: palmtreo: add docg4 device initialization ARM: palmtreo: replace #if defined with IF_ENABLED ARM: palmtreo: fix lcd initilialization on treo680 ARM: palmtreo: fix #ifdefs for leds-gpio device
Mrugesh Katepallewar (1): ARM: davinci: da850: add RTC DT entries
Nicolas Ferre (2): ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodes ARM: at91: remove NEOCORE 926 board
Nobuhiro Iwamatsu (1): ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva
Olof Johansson (104): Merge tag 'swarren-for-3.9-arm-timer-rework' of git://git.kernel.org/.../swarren/linux-tegra into next/cleanup Merge branch 'timer/cleanup' into next/cleanup Merge tag 'ux500-cpufreq-for-arm-soc' of git://git.kernel.org/.../linusw/linux-stericsson into next/drivers Merge tag 'omap-for-v3.9/multiplatform-enable-signed-v2' of git://git.kernel.org/.../tmlind/linux-omap into next/multiplatform Merge tag 'vt8500-multiplatform-3.9' of git://server.prisktech.co.nz/git/linuxwmt into next/multiplatform Merge tag 'armsoc-3.9' of git://server.prisktech.co.nz/git/linuxwmt into next/soc Merge branch 'timer/cleanup' into next/cleanup Merge branch 'clocksource/cleanup' into next/cleanup Merge tag 'vt8500/timer' of git://server.prisktech.co.nz/git/linuxwmt into next/cleanup Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux into next/cleanup Merge branch 'vt8500/timer' into next/cleanup Merge branch 'vt8500/wm8x50' into next/soc Merge branch 'defconfig' of git://git.kernel.org/.../horms/renesas into next/boards Merge tag 'cleanup_for_v3.9' of git://git.infradead.org/users/jcooper/linux into next/cleanup Merge tag 'v3.8-rc5' into next/cleanup Merge branch 'armsoc/fix' of git://github.com/hzhuang1/linux into next/cleanup Merge branch 'armsoc/fix' of git://github.com/hzhuang1/linux into next/fixes-non-critical Merge branch 'armsoc/board' of git://github.com/hzhuang1/linux into next/boards Merge branch 'depends/cleanup' into next/soc Merge branch 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc Merge branch 'depends/cleanup' into next/drivers Merge tag 'coh901318-for-arm-soc' of http://git.kernel.org/.../linusw/linux-stericsson into next/drivers Merge tag 'ux500-fixes-for-v3.8' of http://git.kernel.org/.../linusw/linux-stericsson into fixes Merge branch 'pfc' of git://git.kernel.org/.../horms/renesas into next/sh-pinmux Merge branch 'defconfig2' of git://git.kernel.org/.../horms/renesas into next/boards Merge branch 'boards' of git://git.kernel.org/.../horms/renesas into next/boards Merge branch 'soc' of git://git.kernel.org/.../horms/renesas into next/soc Merge tag 'davinci-for-v3.9/soc' of git://gitorious.org/linux-davinci/linux-davinci into next/soc Merge tag 'davinci-for-v3.9/board' of git://gitorious.org/linux-davinci/linux-davinci into next/boards Merge tag 'davinci-for-v3.9/dt' of git://gitorious.org/linux-davinci/linux-davinci into next/dt Merge branch 'depends/cleanup' into next/dt Merge tag 'nmk-dt-on-cleanups' of git://git.kernel.org/.../linusw/linux-nomadik into next/dt Merge tag 'imx-cleanup-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup Merge tag 'bcm2835-for-3.9-soc' of git://git.kernel.org/.../swarren/linux-rpi into next/soc Merge tag 'bcm2835-for-3.9-cleanup' of git://git.kernel.org/.../swarren/linux-rpi into next/cleanup Merge tag 'bcm2835-for-3.9-dt' of git://git.kernel.org/.../swarren/linux-rpi into next/dt Merge tag 'bcm2835-for-3.9-defconfig' of git://git.kernel.org/.../swarren/linux-rpi into next/boards Merge branch 'v3.8-samsung-fixes-4' of git://git.kernel.org/.../kgene/linux-samsung into fixes Merge tag 'mvebu_fixes_for_v3.8-rc6' of git://git.infradead.org/users/jcooper/linux into fixes Merge tag 'cleanup_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux into next/cleanup Merge tag 'vexpress/fixes-for-3.9' of git://git.linaro.org/people/pawelmoll/linux into next/fixes-non-critical Merge tag 'ux500-no-idh' of git://git.kernel.org/.../linusw/linux-stericsson into next/cleanup Merge branch 'zynq/timer' of git://git.xilinx.com/linux-xlnx into next/cleanup Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes Merge tag 'vexpress/drivers-for-3.9' of git://git.linaro.org/people/pawelmoll/linux into next/drivers Merge tag 'renesas-boards2-for-v3.9' of git://git.kernel.org/.../horms/renesas into next/boards Merge tag 'renesas-soc2-for-v3.9' of git://git.kernel.org/.../horms/renesas into next/soc Merge branch 'next/cleanup-header' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup Merge tag 'imx6q-cpudile-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc Merge tag 'cleanup_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux into next/cleanup Merge tag 'v3.8-rc6' into next/soc Merge tag 'drivers_for_v3.9' of git://git.infradead.org/users/jcooper/linux into next/soc Merge tag 'v3.8-rc6' into next/dt Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup Merge tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux into fixes Merge tag 'imx-fixes-3.8-4' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes Merge tag 'renesas-soc3-for-v3.9' of git://git.kernel.org/.../horms/renesas into next/soc Merge tag 'tegra-for-3.9-cleanup' of git://git.kernel.org/.../swarren/linux-tegra into next/cleanup Merge tag 'tegra-for-3.9-soc-ccf' of git://git.kernel.org/.../swarren/linux-tegra into next/soc Merge tag 'tegra-for-3.9-soc-usb' of git://git.kernel.org/.../swarren/linux-tegra into next/soc Merge tag 'tegra-for-3.9-soc-cpuidle' of git://git.kernel.org/.../swarren/linux-tegra into next/soc Merge tag 'tegra-for-3.9-soc-t114' of git://git.kernel.org/.../swarren/linux-tegra into next/soc ARM: tegra: remove empty tegra_smp_init_cpus() Merge branch 'next/soc' into next/dt Merge tag 'tegra-for-3.9-dt' of git://git.kernel.org/.../swarren/linux-tegra into next/dt Merge tag 'tegra-for-3.9-defconfig' of git://git.kernel.org/.../swarren/linux-tegra into next/boards Merge tag 'omap-for-v3.9/fixes-non-critical-signed-v2' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical Merge tag 'omap-for-v3.9/gpmc-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/drivers Merge tag 'omap-for-v3.9/pm-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/soc Merge tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/boards Merge tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup Merge branch 'next/irq-s3c24xx' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup Merge branch 'next/cleanup-s3c24xx-2' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup Merge tag 'v3.8-rc6' into next/cleanup Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup Merge tag 'renesas-soc4-for-v3.9' of git://git.kernel.org/.../horms/renesas into next/soc Merge tag 'omap-for-v3.9/twl-signed-v2' of git://git.kernel.org/.../tmlind/linux-omap into next/boards Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt Merge tag 'davinci-for-v3.9/dt-2' of git://gitorious.org/linux-davinci/linux-davinci into next/dt ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC Merge branch 'tegra/t114' into next/soc Merge tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc Merge tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt Merge branch 'for-rmk/perf' of git://git.kernel.org/.../will/linux into next/virt Merge branch 'for-rmk/virt/kvm/core' of git://git.kernel.org/.../will/linux into next/virt Merge branch 'for-rmk/broadcast' of git://git.kernel.org/.../will/linux into next/virt Merge branch 'for-arm-soc/arch-timers' of git://git.kernel.org/.../will/linux into next/virt Merge branch 'irqchip/gic-vic-move' into next/virt Merge branch 'depends/rmk-psci' into next/virt Merge branch 'depends/cleanup' into next/virt Merge branch 'for-arm-soc/virt/mach' of git://git.kernel.org/.../will/linux into next/virt arm: arch_timer: add missing inline in stub function Merge branch 'socfpga/hw' into next/soc Merge tag 'for-arm-soc-cleanup' of git://git.kernel.org/.../linusw/linux-stericsson into next/cleanup Merge branch 'fixes-for-3.9' into next/fixes-non-critical Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into next/fixes-non-critical Merge tag 'v3.8-rc7' into next/boards Merge tag 'arm-imx-defconfig' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards Merge branch 'kvm-arm/timer' of git://git.kernel.org/.../maz/arm-platforms into next/virt Merge branch 'next/fixes-samsung' of git://git.kernel.org/.../kgene/linux-samsung into next/fixes-non-critical Merge tag 'sunxi-dt-for-3.9' of https://github.com/mripard/linux into next/dt Merge tag 'at91-dt-late' of git://github.com/at91linux/linux-at91 into next/dt
Pali Rohár (2): RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel RX-51: Register twl4030-madc device
Paul Walmsley (19): ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code ARM: OMAP4: clock/hwmod data: start to remove some IP block control "clocks" ARM: OMAP4: clock/hwmod data: remove MODULEMODE entries in mux + gate combos ARM: OMAP2xxx: clock data: clean up unused null clocks ARM: OMAP2xxx: powerdomain: core powerdomain missing logic retention states ARM: OMAP3xxx: CPUIdle: simplify the PER next-state code ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle() ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control ARM: OMAP2+: clockdomain: add pwrdm_state_switch() call to clkdm_sleep() ARM: OMAP2xxx: PM: clean up some crufty powerstate programming code ARM: OMAP2: PM/powerdomain: drop unnecessary pwrdm_wait_transition() ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock ARM: OMAP2xxx: CM: remove autodep handling ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
Peter De Schrijver (3): clk: tegra: Implement locking for super clock clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: local arrays should be static
Peter Ujfalusi (9): ARM: OMAP: 3430sdp: Enable extmute functionality for audio ARM: OMAP: zoom: Zoom2 does not have extmute functionality ARM: OMAP2+: twl-common: Add default twl4030 audio configuration ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup ARM: OMAP: zoom: Audio support via the common omap-twl4030 machine driver ARM: OMAP: sdp3430: Audio support via the common omap-twl4030 machine driver ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030
Philip Avinash (1): ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
Prashant Gaikwad (18): ARM: tegra: add function to read chipid ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h ARM: tegra: define Tegra30 CAR binding clk: tegra: add Tegra specific clocks clk: tegra: add clock support for Tegra20 clk: tegra: add clock support for Tegra30 ARM: tegra: migrate to new clock code ARM: tegra: remove legacy clock code spi: tegra: do not use clock name to get clock ARM: tegra: add clock properties to Tegra20 DT ARM: tegra: add clock properties to Tegra30 DT ARM: tegra: paz00: add clock information to DT staging: nvec: remove use of clk_get_sys ASoC: tegra: remove auxdata ARM: tegra20: remove auxdata ARM: tegra30: remove auxdata clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()s clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()s
Richard Zhao (1): ARM: tegra: cpufreq: move clk_get/put out of function tegra_cpu_init/exit
Rob Herring (17): ARM: GIC: remove assembly ifdefs from gic.h ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: set handle_arch_irq in GIC initialization ARM: remove mach .handle_irq for GIC users irqchip: Move ARM GIC to drivers/irqchip ARM: use common irqchip_init for GIC init irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: VIC: shrink down vic.h ARM: VIC: set handle_arch_irq in VIC initialization ARM: remove mach .handle_irq for VIC users ARM: remove unneeded vic.h includes ARM: samsung: remove unused tick.h irqchip: Move ARM VIC to drivers/irqchip ARM: spear: use common irqchip_init function ARM: picoxcell: use common irqchip_init function irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: exynos: move exynos4210-combiner to drivers/irqchip
Robert Nelson (1): ARM: at91: at91sam9x5: fix usart3 pinctrl name
Robert Tivy (5): ARM: davinci: da850 board: change pr_warning() to pr_warn() ARM: davinci: devices-da8xx.c: change pr_warning() to pr_warn() ARM: davinci: psc.c: change pr_warning() to pr_warn() ARM: davinci: psc: introduce reset API ARM: davinci: da850: add dsp clock definition
Roger Quadros (2): ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
Rusty Russell (1): KVM: ARM: VFP userspace interface
Sachin Kamat (4): ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c ARM: S3C24XX: Make 'clk_msysclk' static ARM: SAMSUNG: Silence empty switch warning in sdhci.h ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
Santosh Shilimkar (1): ARM: OMAP: Make use of available scu_a9_get_base() interface
Sebastian Hesselbarth (2): ARM: dove: cleanup includes ARM: dove: cleanup includes
Sekhar Nori (2): ARM: davinci: defconfig: enable devtmpfs and devtmpfs automount ARM: davinci: defconfig: enable pm_runtime
Shawn Guo (18): ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG ARM: remove unused arch_decomp_wdog() ARM: samsung: remove unused arch_decomp_wdog() code clockevents: export clockevents_config_and_register for module use ARM: use clockevents_config_and_register() where possible clocksource: use clockevents_config_and_register() where possible ARM: remove redundant 'select GENERIC_GPIO' ARM: imx: remove unused imx6q_clock_map_io() ARM: imx: use debug_ll_io_init() for imx6q Merge tag 'imx-cleanup-3.9' into imx6q-cpuidle ARM: imx: return zero in case next event gets a large increment ARM: imx: mask gpc interrupts initially ARM: imx: move imx6q_cpuidle_driver into a separate file ARM: imx6q: support WAIT mode using cpuidle Merge tag 'imx-cleanup-3.9' into imx/soc ARM: imx: use separated debug uart symbol for imx31 and imx35 ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc
Shirish S (1): ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
Simon Horman (15): ARM: mach-shmobile: mackerel: update defconfig ARM: mach-shmobile: fix memory size for kota2_defconfig ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: armadillo: update defconfig ARM: mach-shmobile: kzm9d: update defconfig ARM: mach-shmobile: armadillo: defconfig: Enable CEU ARM: mach-shmobile: mackerel: enable VFP in defconfig Merge remote-tracking branches 'arm-soc/irqchip/gic-vic-move' and 'arm-soc/timer/cleanup' into soc ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT ARM: mach-shmobile: sh73a0: Minimal setup using DT ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus ARM: shmobile: r8a7779: Correct TMU clock support ARM: shmobile: r8a7779: Correct TMU clock support again
Soren Brinkmann (7): arm: zynq: timer: Replace PSS through PS arm: zynq: timer: Remove unnecessary register write arm: zynq: timer: Remove unused #defines arm: zynq: timer: Align columns arm: zynq: timer: Remove redundant #includes arm: zynq: timer: Fix comment style arm: zynq: timer: Set clock_event cpumask
Srinidhi Kasagar (1): ARM: mach-ux500: use SGI0 to wake up the other core
Steffen Trumtrar (1): ARM: i.MX25: clk: parent per5_clk to AHB clock
Stephen Warren (41): cris: move usec/nsec conversion to do_slow_gettimeoffset time: convert arch_gettimeoffset to a pointer m68k: set arch_gettimeoffset directly ARM: set arch_gettimeoffset directly ARM: at91: convert timer suspend/resume to clock_event_device ARM: pxa: convert timer suspend/resume to clock_event_device ARM: sa1100: convert timer suspend/resume to clock_event_device ARM: ux500: convert timer suspend/resume to clock_event_device ARM: samsung: register syscore_ops for timer resume directly ARM: remove struct sys_timer suspend and resume fields ARM: delete struct sys_timer clocksource: add common of_clksrc_init() function ARM: sunxi: fix struct sys_timer removal Merge remote-tracking branch 'korg_arm-soc/timer/cleanup' into cleanup ARM: bcm2835: make use of CLKSRC_OF clk: bcm2835: probe for fixed-clock in device tree ARM: bcm2835 rpi: remove hard-coded memreserve from DT ARM: bcm2835: add SDHCI node to DT ARM: bcm2835: add I2C controllers to DT ARM: bcm2835: fix clock node aliasing in device tree ARM: bcm2835: defconfig updates Merge remote-tracking branch 'korg_arm-soc/timer/cleanup' into for-3.9/cleanup ARM: tegra: move timer.c to drivers/clocksource/ ARM: tegra: fix Kconfig warnings when !SMP Merge remote-tracking branch 'korg_arm-soc/depends/rmk-perf' into for-3.9/scu-base-rework ARM: tegra: define Tegra20 CAR binding ARM: tegra: add clocks properties to USB PHY nodes usb: host: tegra: don't touch EMC clock Merge branch 'for-3.9/scu-base-rework' into for-3.9/soc-t114 ARM: tegra: trimslice: add gpio-poweroff node to DT ARM: tegra: seaboard: enable HDMI port ARM: tegra: ventana: enable HDMI port ARM: tegra: paz00: enable HDMI port ARM: tegra: swap cache-/interrupt-ctrlr nodes in DT ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi ARM: imx: fix imx31-dt.c time-related warning clocksource: always define CLOCKSOURCE_OF_DECLARE ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: sort Kconfig selects for Tegra114 clk: tegra: fix driver to match DT binding ARM: tegra: remove clock-frequency properties from serial nodes
Steve Zhan (1): ARM: ux500: add spin_unlock(&master_lock).
Thomas Abraham (2): ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440 ARM: EXYNOS: Fix crash on soft reset on EXYNOS5440
Thomas Gleixner (1): ARM: OMAP: make wakeupgen_lock raw
Thomas Petazzoni (4): arm: kirkwood: dockstar: remove useless include of SDIO header irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS irqchip: add basic infrastructure arm: add set_handle_irq() to register the parent IRQ controller handler function
Tomasz Figa (1): ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled
Tony Lindgren (16): ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels ARM: OMAP2+: Use omap initcalls ARM: OMAP: Fix i2c cmdline initcall for multiplatform ARM: OMAP: Fix dmaengine init for multiplatform ARM: OMAP2+: Add multiplatform debug_ll support ARM: OMAP2+: Disable code that currently does not work with multiplaform ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support ARM: OMAP2+: Add minimal support for booting vexpress ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S Merge branch 'peter/for-tony' of git://gitorious.org/omap-audio/linux-audio into omap-for-v3.9/twl Merge tag 'omap-cleanup-a-for-3.9' of git://git.kernel.org/.../pjw/omap-pending into omap-for-v3.9/pm Merge tag 'omap-cleanup-b-for-3.9' of git://git.kernel.org/.../pjw/omap-pending into omap-for-v3.9/pm ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall ARM: OMAP2+: Make sure files with omap initcalls include soc.h Merge branch 'usbhost17-for-arm-soc' of git://github.com/rogerq/linux into omap-for-v3.9/usb
Tony Prisk (8): arm: vt8500: Remove single platform Kconfig options arm: vt8500: Convert debug-macro.S to be multiplatform friendly arm: vt8500: Remove remaining mach includes arm: vt8500: Add support for Wondermedia WM8750/WM8850 timer: vt8500: Move timer code to drivers/clocksource timer: vt8500: Convert vt8500 to use CLKSRC_OF dts: vt8500: Add initial dts support for WM8850 arm: vt8500: Update MAINTAINERS entry for arch-vt8500
Torben Hohn (2): ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
Ulf Hansson (1): cpufreq: dbx500: Move clk_get to probe
Ulrich Hecht (2): ARM: mach-shmobile: add shmobile_cpu_disable_any() ARM: mach-shmobile: sh73a0: allow unplugging of CPU0
Venu Byravarasu (11): ARM: tegra: remove USB address related macros from iomap.h usb: phy: use kzalloc to allocate struct tegra_usb_phy ARM: tegra: Add new DT property to USB node. usb: host: tegra: Resetting PORT0 based on information received via DT. usb: phy: remove unused APIs from Tegra PHY. ARM: tegra: add DT nodes for Tegra USB PHY USB: PHY: tegra: get rid of instance number to differentiate legacy controller USB: PHY: tegra: Get rid of instance number to differentiate PHY type usb: add APIs to access host registers from Tegra PHY ARM: tegra: Add reset GPIO information to PHY DT node usb: host: tegra: make use of PHY pointer of HCD
Viresh Kumar (1): ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
Vishwanathrao Badarkhe, Manish (1): ARM: davinci: da850: add DT node for I2C0
Vivien Didelot (1): ARM: davinci: da8xx_register_spi() should not register SPI board info
Will Deacon (10): Merge branch 'for-rmk/perf' into for-rmk/virt/kvm/core Merge branch 'for-will/kvm/core' of git://github.com/virtualopensystems/linux-kvm-arm into for-rmk/virt/kvm/core Merge branch 'timers/for-arm' of git://git.kernel.org/.../tip/tip into for-rmk/broadcast Merge branch 'clocks/broadcast-arm' of git://linux-arm.org/linux-mr into for-rmk/broadcast Merge branch 'for-will/arch-timer-unification' of git://linux-arm.org/linux-mr into for-arm-soc/arch-timers Merge branch 'for-rmk/virt/psci' into for-arm-soc/virt/mach Merge branch 'irqchip/gic-vic-move' of git://git.kernel.org/.../arm/arm-soc into for-arm-soc/virt/mach ARM: mach-virt: add SMP support using PSCI ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU ARM: mach-virt: fixup machine descriptor after removal of sys_timer
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |