lkml.org 
[lkml]   [2013]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] sound/soc/atmel: Add slave mode support to SSC in DSP Mode A
Date
From: Zoltan Puskas <zpuskas@dension.com>

Add previously unsupported slave mode to the SSC peripheral when using
DSP/PCM Mode A format on the Atmel ARM platform.


Signed-off-by: Zoltan Puskas <zpuskas@dension.com>
---
The code was tested using WM8804 and WM8731 digital sound chips,
using 3.7.9 and 3.3.1 kernels on a system with AT91SAM9261 CPU
on board.

--- linux-3.7.9/sound/soc/atmel/atmel_ssc_dai.c.orig 2013-02-19 15:43:43.070980604 +0100
+++ linux-3.7.9/sound/soc/atmel/atmel_ssc_dai.c 2013-02-19 15:50:07.613586313 +0100
@@ -543,6 +543,49 @@ static int atmel_ssc_hw_params(struct sn
break;

case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks.
+ *
+ * The SSC transmit clock is obtained from the BCLK signal on
+ * on the TK line, and the SSC receive clock is
+ * generated from the transmit clock.
+ *
+ * Data is transferred on first BCLK after LRC pulse rising
+ * edge.If stereo, the right channel data is contiguous with
+ * the left channel data.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
default:
printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
ssc_p->daifmt);



\
 
 \ /
  Last update: 2013-02-20 18:21    [W:0.043 / U:9.044 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site