Messages in this thread | | | Date | Sun, 17 Feb 2013 14:26:13 +0800 | From | Shawn Guo <> | Subject | Re: WARNING: at drivers/tty/tty_buffer.c:476 (tty is NULL) |
| |
Hi Peter,
On Mon, Feb 11, 2013 at 09:42:30AM -0500, Peter Hurley wrote: > Can you reproduce after using the following patch series? > [PATCH v3 00/23] ldisc fixes > I'm constantly seeing this warning on my board (imx6q - ARM Cortex-A9 Quad) with -next kernel, while I believe v3.8-rc kernel works just fine for me.
The warning can be seen during both boot and suspend/resume (in a couple of iterations). The bad thing is "[PATCH v3 00/23] ldisc fixes" does not help my case at all.
Shawn
Booting Linux on physical CPU 0x0 Linux version 3.8.0-rc7-next-20130215+ (r65073@S2101-09) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #330 SMP Sun Feb 17 13:59:44 CST 2013 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6Q SABRE Smart Device Board Memory policy: ECC disabled, Data cache writealloc On node 0 totalpages: 262144 free_area_init_node: node 0, pgdat 80746180, node_mem_map 8079f000 Normal zone: 2048 pages used for memmap Normal zone: 0 pages reserved Normal zone: 262144 pages, LIFO batch:31 PERCPU: Embedded 7 pages/cpu @80fad000 s6656 r8192 d13824 u32768 pcpu-alloc: s6656 r8192 d13824 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 Kernel command line: console=ttymxc0,115200 debug earlyprintk no_console_suspend root=/dev/nfs ip=dhcp nfsroot=192.168.1.100:/home/r65073/nfs/rfs-imx6q,v3,tcp PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) __ex_table already sorted, skipping sort Memory: 1024MB = 1024MB total Memory: 1031576k/1031576k available, 17000k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc0800000 - 0xff000000 (1000 MB) lowmem : 0x80000000 - 0xc0000000 (1024 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x806aff04 (6816 kB) .init : 0x806b0000 - 0x806faa00 ( 299 kB) .data : 0x806fc000 - 0x80746ae0 ( 299 kB) .bss : 0x80746ae0 - 0x8079ef54 ( 354 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x000000c0, AUX_CTRL 0x02070000, Cache size: 1048576 B sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 65075ms smp_twd: clock not found -2 CPU identified as i.MX6Q, silicon rev 1.2 Console: colour dummy device 80x30 Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Calibrating local timer... 396.17MHz. Setting up static identity map for 0x8051f678 - 0x8051f6e8 CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: Booted secondary processor CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: Booted secondary processor CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Brought up 4 CPUs SMP: Total of 4 processors activated (6324.22 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations syscon 20c8000.anatop: syscon regmap start 0x20c8000 end 0x20c8fff registered vdd1p1: 800 <--> 1375 mV at 1100 mV vdd3p0: 2800 <--> 3150 mV at 3000 mV vdd2p5: 2000 <--> 2750 mV at 2400 mV cpu: 725 <--> 1450 mV at 1100 mV vddpu: 725 <--> 1450 mV at 1100 mV vddsoc: 725 <--> 1450 mV at 1200 mV syscon 20e0000.iomuxc-gpr: syscon regmap start 0x20e0000 end 0x20e0037 registered imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver bio: create slab <bio-0> at 0 mxs-dma 110000.dma-apbh: initialized SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. Switching to clocksource mxc_timer1 NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.21) msgmni has been set to 2014 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) imx-sdma 20ec000.sdma: initialized Serial: IMX driver 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX console [ttymxc0] enabled [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded registered PHC device on eth%d libphy: fec_enet_mii_bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0 i2c /dev entries driver imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: no vqmmc regulator found mmc0: no vmmc regulator found mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA mmc1: no vqmmc regulator found mmc1: no vmmc regulator found mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 imx-ipuv3 2400000.ipu: IPUv3H probed imx-ipuv3 2800000.ipu: IPUv3H probed TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 input: gpio-keys.8 as /devices/gpio-keys.8/input/input0 ------------[ cut here ]------------ WARNING: at /home/r65073/repos/next/linux-next/drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x18c/0x1a0() snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 04:16:21 UTC (15381) tty is NULL Modules linked in: Backtrace: [<8001199c>] (dump_backtrace+0x0/0x10c) from [<805195c8>] (dump_stack+0x18/0x1c) r6:000001ac r5:8029a8e8 r4:bfa89e98 r3:00000000 [<805195b0>] (dump_stack+0x0/0x1c) from [<80021004>] (warn_slowpath_common+0x54/0x70) [<80020fb0>] (warn_slowpath_common+0x0/0x70) from [<800210c4>] (warn_slowpath_fmt+0x38/0x40) r8:00000000 r7:bf804000 r6:80fb1000 r5:00000000 r4:bf804000 r3:00000009 [<8002108c>] (warn_slowpath_fmt+0x0/0x40) from [<8029a8e8>] (flush_to_ldisc+0x18c/0x1a0) r3:00000000 r2:80642ac0 [<8029a75c>] (flush_to_ldisc+0x0/0x1a0) from [<80038f48>] (process_one_work+0x114/0x378) [<80038e34>] (process_one_work+0x0/0x378) from [<80039540>] (worker_thread+0x12c/0x3f0) [<80039414>] (worker_thread+0x0/0x3f0) from [<8003e8f0>] (kthread+0xac/0xb8) [<8003e844>] (kthread+0x0/0xb8) from [<8000e618>] (ret_from_fork+0x14/0x3c) r7:00000000 r6:00000000 r5:8003e844 r4:bf879e64 ---[ end trace df46cda12ac3bc25 ]--- eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready libphy: 2188000.ethernet:01 - Link is Up - 100/Full IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending DHCP requests ., OK IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.103 IP-Config: Complete: device=eth0, hwaddr=00:04:9f:01:1b:63, ipaddr=192.168.1.103, mask=255.255.255.0, gw=192.168.1.1 host=192.168.1.103, domain=domain, nis-domain=(none) bootserver=0.0.0.0, rootserver=192.168.1.100, rootpath=, mtu=576 nameserver0=61.177.7.1, nameserver1=221.228.255.1 ALSA device list: No soundcards found. VFS: Mounted root (nfs filesystem) readonly on device 0:11. devtmpfs: mounted Freeing init memory: 296K starting pid 52, tty '': '/etc/rc.d/rcS' Mounting /proc and /sys Starting the hotplug events dispatcher udevd udevd (62): /proc/62/oom_adj is deprecated, please use /proc/62/oom_score_adj instead. Synthesizing initial hotplug events imx-sdma 20ec000.sdma: firmware not found Setting the hostname to freescale Mounting filesystems mount: mounting usbfs on /proc/bus/usb failed: No such file or directory Starting the dropbear ssh server: D-Bus per-session daemon address is: unix:abstract=/tmp/dbus-gBTWuUASn1,guid=4a5fbed482fe86f57671852a00003c1f gtk: creating gdk-pixbuf.loaders pango: creating module list starting pid 682, tty '': '/etc/rc.d/rc_gpu.S' starting pid 688, tty '': '/etc/rc.d/rc_mxc.S' Error opening framebuffer /dev/fb0: No such file or directory
Fatal server error: no screens found
arm-none-linux-gnueabi-gcc (Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09:20) 4.6.2 20110630 (prerelease) root filesystem built on Wed, 26 Dec 2012 15:44:10 -0600 Freescale Semiconductor, Inc.
freescale login: matchbox-panel: failed to open displaymatchbox-desktop: unable to open display ! matchbox: can't open display! check your DISPLAY variable. root login[690]: root login on 'ttymxc0'
BusyBox v1.20.2 () built-in shell (ash) Enter 'help' for a list of built-in commands.
root@freescale ~$ ./rtcwakeup.sh rtcwakeup.out: wakeup from "mem" using rtc0 at Fri Jan 2 04:18:12 1970 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 0.699 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.220 msecs PM: noirq suspend of devices complete after 0.691 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor CPU1 is up CPU2: Booted secondary processor CPU2 is up CPU3: Booted secondary processor CPU3 is up PM: noirq resume of devices complete after 0.180 msecs PM: early resume of devices complete after 0.258 msecs PM: resume of devices complete after 2.687 msecs PM: resume devices took 0.010 seconds PM: Finishing wakeup. Restarting tasks ... done. Pass 2 times!!!!!!!!!! rtcwakeup.out: wakeup from "mem" using rtc0 at Fri Jan 2 04:18:16 1970 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 0.689 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.223 msecs PM: noirq suspend of devices complete after 0.725 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor CPU1 is up CPU2: Booted secondary processor CPU2 is up CPU3: Booted secondary processor CPU3 is up PM: noirq resume of devices complete after 0.182 msecs PM: early resume of devices complete after 0.273 msecs ------------[ cut here ]------------ WARNING: at /home/r65073/repos/next/linux-next/drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x18c/0x1a0() tty is NULL Modules linked in: Backtrace: PM: resume of devices complete after 17.922 msecs PM: resume devices took 0.020 seconds PM: Finishing wakeup. Restarting tasks ... done.
[<8001199c>] (dump_backtrace+0x0/0x10c) from [<805195c8>] (dump_stack+0x18/0x1c) r6:000001ac r5:8029a8e8 r4:bfa89e98 r3:00000000 [<805195b0>] (dump_stack+0x0/0x1c) from [<80021004>] (warn_slowpath_common+0x54/0x70) [<80020fb0>] (warn_slowpath_common+0x0/0x70) from [<800210c4>] (warn_slowpath_fmt+0x38/0x40) r8:00000000 r7:bf0d2600 r6:80fb1000 r5:00000000 r4:bf0d2600 r3:00000009 [<8002108c>] (warn_slowpath_fmt+0x0/0x40) from [<8029a8e8>] (flush_to_ldisc+0x18c/0x1a0) r3:00000000 r2:80642ac0 [<8029a75c>] (flush_to_ldisc+0x0/0x1a0) from [<80038f48>] (process_one_work+0x114/0x378) [<80038e34>] (process_one_work+0x0/0x378) from [<80039540>] (worker_thread+0x12c/0x3f0) [<80039414>] (worker_thread+0x0/0x3f0) from [<8003e8f0>] (kthread+0xac/0xb8) [<8003e844>] (kthread+0x0/0xb8) from [<8000e618>] (ret_from_fork+0x14/0x3c) r7:00000000 r6:00000000 r5:8003e844 r4:bf879e64 ---[ end trace df46cda12ac3bc26 ]--- Pass 3 times!!!!!!!!!! rtcwakeup.out: wakeup from "mem" using rtc0 at Fri Jan 2 04:18:20 1970 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 0.687 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.210 msecs PM: noirq suspend of devices complete after 0.721 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor CPU1 is up CPU2: Booted secondary processor CPU2 is up CPU3: Booted secondary processor CPU3 is up PM: noirq resume of devices complete after 0.179 msecs PM: early resume of devices complete after 0.261 msecs ------------[ cut here ]------------ WARNING: at /home/r65073/repos/next/linux-next/drivers/tty/tty_buffer.c:428 flush_to_ldisc+0x18c/0x1a0() tty is NULL Modules linked in: Backtrace: PM: resume of devices complete after 17.891 msecs PM: resume devices took 0.010 seconds PM: Finishing wakeup. Restarting tasks ... done.
[<8001199c>] (dump_backtrace+0x0/0x10c) from [<805195c8>] (dump_stack+0x18/0x1c) r6:000001ac r5:8029a8e8 r4:bf2bbe98 r3:00000000 [<805195b0>] (dump_stack+0x0/0x1c) from [<80021004>] (warn_slowpath_common+0x54/0x70) [<80020fb0>] (warn_slowpath_common+0x0/0x70) from [<800210c4>] (warn_slowpath_fmt+0x38/0x40) r8:00000000 r7:bf0d2600 r6:80fb1000 r5:00000000 r4:bf0d2600 r3:00000009 [<8002108c>] (warn_slowpath_fmt+0x0/0x40) from [<8029a8e8>] (flush_to_ldisc+0x18c/0x1a0) r3:00000000 r2:80642ac0 [<8029a75c>] (flush_to_ldisc+0x0/0x1a0) from [<80038f48>] (process_one_work+0x114/0x378) [<80038e34>] (process_one_work+0x0/0x378) from [<80039540>] (worker_thread+0x12c/0x3f0) [<80039414>] (worker_thread+0x0/0x3f0) from [<8003e8f0>] (kthread+0xac/0xb8) [<8003e844>] (kthread+0x0/0xb8) from [<8000e618>] (ret_from_fork+0x14/0x3c) r7:00000000 r6:00000000 r5:8003e844 r4:bf879e64 ---[ end trace df46cda12ac3bc27 ]---
root@freescale ~$
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |