lkml.org 
[lkml]   [2013]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Radeon RV100 init fails with specific card+mobo - IRQ problem
From
On Fri, Feb 1, 2013 at 10:26 AM, Meelis Roos <mroos@linux.ee> wrote:
>> > Adding some printks reveals it calls
>> > r100_init() -> radeon_irq_kms_init() -> drm_irq_install() ->
>> > drm_dev_to_irq() and that fails. So no IRQ, no KMS.
>> >
>> > lspci does not show Interrupt like on some other PCI devices.
>> > /proc/interrupts obviously does not contain the irq since we do not
>> > register any yet.
>> >
>> > There is no BIOS option of "Enable IRQ for VGA" or similar (BIOS is
>> > latest). Could this be the problem?
>> >
>> > What can I do to get KMS working on this computer?
>> >
>> > --
>> > Meelis Roos (mroos@linux.ee)
>>
>> Try booting with radeon.agp_mode=-1
>
> radeon: `-1' invalid for parameter `agp_mode'

radeon.agpmode=-1

However, I think there are a number of places where we require
interrupts that would need to be worked around (fences, display
hotplug, pageflipping) if not interrupt is available.

Alex


\
 
 \ /
  Last update: 2013-02-01 17:21    [W:0.093 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site