lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings
    Am 2013-12-05 18:12, schrieb Stephen Warren:
    > On 12/03/2013 03:18 PM, Stefan Agner wrote:
    >> Set the parent of the regulators LDO2 to LDO9 according to the
    >> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
    >> module itself.
    >>
    >> Set the Core and CPU voltage to the specified voltages of 1.2V and
    >> 1.0V respectivly.
    >>
    >> LDO6 should deliver 2.85V. The attached peripherals were not in
    >> use so far.
    >
    > Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra
    > tree which doesn't include those patches?

    This patch is independent from 1/3 and 2/3, so you can apply it to the
    Tegra tree. The relevant DT change for 2/3 is included in 2/3...


    \
     
     \ /
      Last update: 2013-12-05 19:01    [W:3.291 / U:0.728 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site