lkml.org 
[lkml]   [2013]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap
Date
The MUIC block in max77693 has different I2C address than PMIC. The
driver allocated two regmaps: for PMIC and MUIC. However it used the
same regmap_config (with max_register field) for both regmaps. Actual
maximum address of register for MUIC is different than for PMIC.

Define another regmap_config for MUIC with proper max_register value.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/mfd/max77693.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 9f92463f4f7e..3873a54e16ff 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -107,6 +107,12 @@ static const struct regmap_config max77693_regmap_config = {
.max_register = MAX77693_PMIC_REG_END,
};

+static const struct regmap_config max77693_regmap_muic_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77693_MUIC_REG_END,
+};
+
static int max77693_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -153,7 +159,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
* before call max77693-muic probe() function.
*/
max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
- &max77693_regmap_config);
+ &max77693_regmap_muic_config);
if (IS_ERR(max77693->regmap_muic)) {
ret = PTR_ERR(max77693->regmap_muic);
dev_err(max77693->dev,
--
1.7.9.5


\
 
 \ /
  Last update: 2013-12-20 11:01    [W:0.042 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site