lkml.org 
[lkml]   [2013]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT
Date
Add ams AS3722 entry for gpio/pincontrol and regulators
to venice2 DT.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
This patch is on top of the patch for pincontrol for venice2.
Tested with all regulator and sub driver registartion on Venice2.

arch/arm/boot/dts/tegra124-venice2.dts | 285 +++++++++++++++++++++++++++++++-
1 files changed, 284 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 7a01171..423371f 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -350,6 +350,28 @@
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};

+ spdif_in_pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "rsvd3";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ dap3_dout_pp2 {
+ nvidia,pins = "dap2_dout_pp2";
+ nvidia,function = "rsvd4";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ kb_row0_pr0 {
+ nvidia,pins = "kb_row0_pr0";
+ nvidia,function = "rsvd4";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
drive_sdio1 {
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
@@ -419,7 +441,190 @@

i2c@7000d000 {
status = "okay";
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
+
+ as3722: as3722@40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1_2_4_7 {
+ pins = "gpio1", "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_6 {
+ pins = "gpio3", "gpio6";
+ bias-high-impedance;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k-out";
+ };
+ };
+
+ regulators {
+ vsup-sd2-supply = <&vdd_ac_bat_reg>;
+ vsup-sd3-supply = <&vdd_ac_bat_reg>;
+ vsup-sd4-supply = <&vdd_ac_bat_reg>;
+ vsup-sd5-supply = <&vdd_ac_bat_reg>;
+ vin-ldo0-supply = <&as3722_sd2>;
+ vin-ldo1-6-supply = <&vdd_3v3_reg>;
+ vin-ldo2-5-7-supply = <&as3722_sd5>;
+ vin-ldo3-4-supply = <&vdd_ac_bat_reg>;
+ vin-ldo9-10-supply = <&vdd_ac_bat_reg>;
+ vin-ldo11-supply = <&vdd_3v3_reg>;
+
+ sd0 {
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd1 {
+ regulator-name = "vdd-core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ as3722_sd2: sd2 {
+ regulator-name = "vddio-ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd4 {
+ regulator-name = "avdd-pex-sata";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ as3722_sd5: sd5 {
+ regulator-name = "vddio-sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd6 {
+ regulator-name = "vdd-gpu";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "run-cam-1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2 {
+ regulator-name = "gen-avdd,vddio-hsic";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3 {
+ regulator-name = "vdd-rtc";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,enable-tracking;
+ };
+
+ ldo4 {
+ regulator-name = "vdd-cam";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5 {
+ regulator-name = "vdd-cam-front";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo6 {
+ regulator-name = "vddio-sdmmc3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo7 {
+ regulator-name = "vdd-cam-rear";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo9 {
+ regulator-name = "vdd-touch";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo10 {
+ regulator-name = "vdd-cam-af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo11 {
+ regulator-name = "vpp-fuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
};

pmc@7000e400 {
@@ -464,6 +669,84 @@
};
};

+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_3v3_modem_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-modem-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_hdmi_5v0_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-hdmi-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_bl_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-bl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ usb_vbus_hs_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus_hs";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ };
+
+ usb_vbus_ss_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus_ss";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ };
+
+ panel_3v3_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-max98090-venice2",
"nvidia,tegra-audio-max98090";
--
1.7.1.1


\
 
 \ /
  Last update: 2013-12-12 15:21    [W:0.057 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site