lkml.org 
[lkml]   [2013]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] debugobject: add support for kref
On Tue, 10 Dec 2013, Greg KH wrote:
> On Sun, Nov 03, 2013 at 08:33:08PM +0100, Sebastian Andrzej Siewior wrote:
> > I run a couple times into the case where "put" was called on an already
> > cleanup object. The results was either nothing because "0" went back to
> > 0xff…ff and release was not called a second time or some thing like this
> > with SLAB once that memory region was used again:
> >
> > |edma-dma-engine edma-dma-engine.0: freeing channel for 57
> > |Slab corruption (Not tainted): kmalloc-256 start=edc4c8c0, len=256
> > |070: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkjkkkkkkkkkkk
> > |Single bit error detected. Probably bad RAM.
> > |Run a memory test tool.
> > |Prev obj: start=edc4c7c0, len=256
> > |000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> > |010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> > |Next obj: start=edc4c9c0, len=256
> > |000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> > |010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> >
> > which got me a little confused about the bit flip at first.
> > The reason for this was resource counting that went wrong followed by a "put"
> > called from two places.
> > After the second time running into the same problem using the same driver,
> > I was looking for something to help me to find atleast one caller (and the
> > kind of object) a little quicker. Here is a debugobject extension to kref which
> > seems to do the job.
> > At kref_init() the debugobject is initialized and activated.
> > At kref_get() / kref_sub() time it is checked if the kref is active. If
> > it is, the request is completed otherwise the "usual" debugobject is
> > printed. Here an example of kref_put() on an already gone object:
> >
> > |edma-dma-engine edma-dma-engine.0: freeing channel for 57
> > |------------[ cut here ]------------
> > |WARNING: CPU: 0 PID: 2053 at lib/debugobjects.c:260 debug_print_object+0x94/0xc4()
> > |ODEBUG: active_state not available (active state 0) object type: kref hint: (null)
> > |Modules linked in: ti_am335x_adc(-)
> > |[<c0014d38>] (unwind_backtrace+0x0/0xf4) from [<c001249c>] (show_stack+0x14/0x1c)
> > |[<c001249c>] (show_stack+0x14/0x1c) from [<c0037264>] (warn_slowpath_common+0x64/0x84)
> > |[<c0037264>] (warn_slowpath_common+0x64/0x84) from [<c0037318>] (warn_slowpath_fmt+0x30/0x40)
> > |[<c0037318>] (warn_slowpath_fmt+0x30/0x40) from [<c022e8d0>] (debug_print_object+0x94/0xc4)
> > |[<c022e8d0>] (debug_print_object+0x94/0xc4) from [<c022e9e4>] (debug_object_active_state+0xe4/0x148)
> > |[<c022e9e4>] (debug_object_active_state+0xe4/0x148) from [<bf0a3474>] (iio_buffer_put+0x24/0x70 [industrialio])
> > |[<bf0a3474>] (iio_buffer_put+0x24/0x70 [industrialio]) from [<bf0a0340>] (iio_dev_release+0x44/0x64 [industrialio])
> > |[<bf0a0340>] (iio_dev_release+0x44/0x64 [industrialio]) from [<c0290308>] (device_release+0x2c/0x94)
> > |[<c0290308>] (device_release+0x2c/0x94) from [<c021f040>] (kobject_release+0x44/0x78)
> > |[<c021f040>] (kobject_release+0x44/0x78) from [<c029600c>] (release_nodes+0x1a0/0x248)
> > |[<c029600c>] (release_nodes+0x1a0/0x248) from [<c029355c>] (__device_release_driver+0x98/0xf0)
> > |[<c029355c>] (__device_release_driver+0x98/0xf0) from [<c0293668>] (driver_detach+0xb4/0xb8)
> > |[<c0293668>] (driver_detach+0xb4/0xb8) from [<c0292538>] (bus_remove_driver+0x98/0xec)
> > |[<c0292538>] (bus_remove_driver+0x98/0xec) from [<c008fe2c>] (SyS_delete_module+0x1e0/0x24c)
> > |[<c008fe2c>] (SyS_delete_module+0x1e0/0x24c) from [<c000e680>] (ret_fast_syscall+0x0/0x48)
> > |---[ end trace bc5e9551626b178a ]---
> >
> > This should help to notice that there is a second "put" and the
> > call chain should point to the object. The "hint" callback is empty because
> > in the "double free" case we don't have any information and the release
> > function is passed as an argument to kref_put(). I think the information
> > is quite good and it is not worth extending debugobject to somehow add
> > this information.
> > The "get/put unless" macros aren't traced completely because it is hard
> > to get it correct without a false positive and without touching each
> > user. The object might be added to a list which is browsed by someone.
> > That someone holds the same lock that is required for in the cleanup path
> > and so the cleanup is blocked. That means that the kref object is
> > gone from debugobject point of view but the release function has not yet
> > complete so it is valid to check the current counter.
> >
> > v1…v2:
> > - not an RFC anymore
> > - addressed tglx review:
> > - use debug_obj_descr with state active
> > - use debug_object_active_state() to check for active object instead the
> > other hack I had.
> > - added debug_object_free() in a way that does not interfere with the
> > NSA sniffer API so it does not get removed from the patch by accident.
> >
> > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
>
> I need an ack from Thomas or some other debugobjects-knowledgable
> developer before I can take this...

Reviwed-by: Thomas Gleixner <tglx@linutronix.de>
\
 
 \ /
  Last update: 2013-12-11 10:41    [W:0.178 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site