lkml.org 
[lkml]   [2013]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [cfg80211 / iwlwifi] setting wireless regulatory domain doesn't work.
    On Wed, Dec 11, 2013 at 4:17 PM, Sander Eikelenboom
    <linux@eikelenboom.it> wrote:
    > Since i haven't got a response to this yet and after having the troubled machine back:
    > The problem is still present in linux 3.13-rc3

    Keep in mind regulatory hints for Intel or Atheros cards do nothing
    other than help compliance further given that the cards already have
    their own regulatory data, the user input / hint is only going to
    reduce the card's channels further. That said the fact that you are
    not seeing a regulatory domain being set is an issue provided you have
    CRDA installed or use CONFIG_CFG80211_INTERNAL_REGDB. Keep in mind
    that the latest version of wireless-regdb had a signature issue
    reported by users and not sure if that is cleared yet, so that would
    also prevent the wireless-regdb being read even if CRDA was present.
    To rule that out try putting the db.txt into net/wireless/db.txt and
    compile with CONFIG_CFG80211_INTERNAL_REGDB for now.

    Then send the dmesg output, no need for all that fluffy intel debug
    log as its not useful in this case.

    Luis


    \
     
     \ /
      Last update: 2013-12-11 17:01    [W:6.659 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site