lkml.org 
[lkml]   [2013]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/7] gpio: davinci: use readl/writel instead of __raw_*
Date
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>

This patch replaces the __raw_readl/writel with
readl and writel, Although the code runs on ARMv5
based SOCs, changing this will help copying the code
for other uses.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
drivers/gpio/gpio-davinci.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 7230c43..ca3d7fd 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -82,14 +82,14 @@ static inline int __davinci_direction(struct gpio_chip *chip,
u32 mask = 1 << offset;

spin_lock_irqsave(&d->lock, flags);
- temp = __raw_readl(&g->dir);
+ temp = readl(&g->dir);
if (out) {
temp &= ~mask;
- __raw_writel(mask, value ? &g->set_data : &g->clr_data);
+ writel(mask, value ? &g->set_data : &g->clr_data);
} else {
temp |= mask;
}
- __raw_writel(temp, &g->dir);
+ writel(temp, &g->dir);
spin_unlock_irqrestore(&d->lock, flags);

return 0;
@@ -118,7 +118,7 @@ static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
struct davinci_gpio_controller *d = chip2controller(chip);
struct davinci_gpio_regs __iomem *g = d->regs;

- return (1 << offset) & __raw_readl(&g->in_data);
+ return (1 << offset) & readl(&g->in_data);
}

/*
@@ -130,7 +130,7 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
struct davinci_gpio_controller *d = chip2controller(chip);
struct davinci_gpio_regs __iomem *g = d->regs;

- __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+ writel((1 << offset), value ? &g->set_data : &g->clr_data);
}

static int davinci_gpio_probe(struct platform_device *pdev)
@@ -227,8 +227,8 @@ static void gpio_irq_disable(struct irq_data *d)
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
u32 mask = (u32) irq_data_get_irq_handler_data(d);

- __raw_writel(mask, &g->clr_falling);
- __raw_writel(mask, &g->clr_rising);
+ writel(mask, &g->clr_falling);
+ writel(mask, &g->clr_rising);
}

static void gpio_irq_enable(struct irq_data *d)
@@ -242,9 +242,9 @@ static void gpio_irq_enable(struct irq_data *d)
status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;

if (status & IRQ_TYPE_EDGE_FALLING)
- __raw_writel(mask, &g->set_falling);
+ writel(mask, &g->set_falling);
if (status & IRQ_TYPE_EDGE_RISING)
- __raw_writel(mask, &g->set_rising);
+ writel(mask, &g->set_rising);
}

static int gpio_irq_type(struct irq_data *d, unsigned trigger)
@@ -286,10 +286,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
int res;

/* ack any irqs */
- status = __raw_readl(&g->intstat) & mask;
+ status = readl(&g->intstat) & mask;
if (!status)
break;
- __raw_writel(status, &g->intstat);
+ writel(status, &g->intstat);

/* now demux them to the right lowlevel handler */
n = d->irq_base;
@@ -346,9 +346,9 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;

- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
? &g->set_falling : &g->clr_falling);
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
? &g->set_rising : &g->clr_rising);

return 0;
@@ -430,8 +430,8 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)

/* default trigger: both edges */
g = gpio2regs(0);
- __raw_writel(~0, &g->set_falling);
- __raw_writel(~0, &g->set_rising);
+ writel(~0, &g->set_falling);
+ writel(~0, &g->set_rising);

/* set the direct IRQs up to use that irqchip */
for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) {
@@ -454,8 +454,8 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)

/* disabled by default, enabled only as needed */
g = gpio2regs(gpio);
- __raw_writel(~0, &g->clr_falling);
- __raw_writel(~0, &g->clr_rising);
+ writel(~0, &g->clr_falling);
+ writel(~0, &g->clr_rising);

/* set up all irqs in this bank */
irq_set_chained_handler(bank_irq, gpio_irq_handler);
@@ -483,7 +483,7 @@ done:
* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(binten, gpio_base + BINTEN);
+ writel(binten, gpio_base + BINTEN);

printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));

--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-08 11:41    [W:0.121 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site