lkml.org 
[lkml]   [2013]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: divider: fix rate calculation for fractional rates
Date
clk-divider.c does not calculate the rates consistently at the moment.

As an example, on OMAP3 we have a clock divider with a source clock of
864000000 Hz. With dividers 6, 7 and 8 the theoretical rates are:

6: 144000000
7: 123428571.428571...
8: 108000000

Calling clk_round_rate() with the rate in the first column will give the
rate in the second column:

144000000 -> 144000000
143999999 -> 123428571
123428572 -> 123428571
123428571 -> 108000000

Note how clk_round_rate() returns 123428571 for rates from 123428572 to
143999999, which is mathematically correct, but when clk_round_rate() is
called with 123428571, the returned value is surprisingly 108000000.

This means that the following code works a bit oddly:

rate = clk_round_rate(clk, 123428572);
clk_set_rate(clk, rate);

As clk_set_rate() also does clock rate rounding, the result is that the
clock is set to the rate of 108000000, not 123428571 returned by the
clk_round_rate.

This patch changes the clk-divider.c to use DIV_ROUND_UP when
calculating the rate. This gives the following behavior which fixes the
inconsistency:

144000000 -> 144000000
143999999 -> 123428572
123428572 -> 123428572
123428571 -> 108000000

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
drivers/clk/clk-divider.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8d3009e..43348f3 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -24,7 +24,7 @@
* Traits of this clock:
* prepare - clk_prepare only ensures that parents are prepared
* enable - clk_enable only ensures that parents are enabled
- * rate - rate is adjustable. clk->rate = parent->rate / divisor
+ * rate - rate is adjustable. clk->rate = DIV_ROUND_UP(parent->rate / divisor)
* parent - fixed parent. No clk_set_parent support
*/

@@ -115,7 +115,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
return parent_rate;
}

- return parent_rate / div;
+ return DIV_ROUND_UP(parent_rate, div);
}

/*
@@ -185,7 +185,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
}
parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
MULT_ROUND_UP(rate, i));
- now = parent_rate / i;
+ now = DIV_ROUND_UP(parent_rate, i);
if (now <= rate && now > best) {
bestdiv = i;
best = now;
@@ -207,7 +207,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
int div;
div = clk_divider_bestdiv(hw, rate, prate);

- return *prate / div;
+ return DIV_ROUND_UP(*prate, div);
}

static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -218,7 +218,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags = 0;
u32 val;

- div = parent_rate / rate;
+ div = DIV_ROUND_UP(parent_rate, rate);
value = _get_val(divider, div);

if (value > div_mask(divider))
--
1.8.3.2


\
 
 \ /
  Last update: 2013-11-06 12:21    [W:0.564 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site