[lkml]   [2013]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3 00/15] KVM: MMU: locklessly write-protect
Marcelo can you review it please?

On Wed, Oct 23, 2013 at 09:29:18PM +0800, Xiao Guangrong wrote:
> Changelog v3:
> - the changes from Gleb's review:
> 1) drop the patch which fixed the count of spte number in rmap since it
> can not be easily fixed and it has gone after applying this patchset
> - ideas from Gleb and discussion with Marcelo is also very appreciated:
> 2) change the way to locklessly access shadow page - use SLAB_DESTROY_BY_RCU
> to protect shadow page instead of conditionally using call_rcu()
> 3) improve is_last_spte() that checks last spte by only using some bits on
> the spte, then it is safely used when we locklessly write-protect the
> shadow page table
> Changelog v2:
> - the changes from Gleb's review:
> 1) fix calculating the number of spte in the pte_list_add()
> 2) set iter->desc to NULL if meet a nulls desc to cleanup the code of
> rmap_get_next()
> 3) fix hlist corruption due to accessing sp->hlish out of mmu-lock
> 4) use rcu functions to access the rcu protected pointer
> 5) spte will be missed in lockless walker if the spte is moved in a desc
> (remove a spte from the rmap using only one desc). Fix it by bottom-up
> walking the desc
> - the changes from Paolo's review
> 1) make the order and memory barriers between update spte / add spte into
> rmap and dirty-log more clear
> - the changes from Marcelo's review:
> 1) let fast page fault only fix the spts on the last level (level = 1)
> 2) improve some changelogs and comments
> - the changes from Takuya's review:
> move the patch "flush tlb if the spte can be locklessly modified" forward
> to make it's more easily merged
> Thank all of you very much for your time and patience on this patchset!
> Since we use rcu_assign_pointer() to update the points in desc even if dirty
> log is disabled, i have measured the performance:
> Host: Intel(R) Xeon(R) CPU X5690 @ 3.47GHz * 12 + 36G memory
> - migrate-perf (benchmark the time of get-dirty-log)
> before: Run 10 times, Avg time:9009483 ns.
> after: Run 10 times, Avg time:4807343 ns.
> - kerbench
> Guest: 12 VCPUs + 8G memory
> before:
> EPT is enabled:
> # cat 09-05-origin-ept | grep real
> real 85.58
> real 83.47
> real 82.95
> EPT is disabled:
> # cat 09-05-origin-shadow | grep real
> real 138.77
> real 138.99
> real 139.55
> after:
> EPT is enabled:
> # cat 09-05-lockless-ept | grep real
> real 83.40
> real 82.81
> real 83.39
> EPT is disabled:
> # cat 09-05-lockless-shadow | grep real
> real 138.91
> real 139.71
> real 138.94
> No performance regression!
> Background
> ==========
> Currently, when mark memslot dirty logged or get dirty page, we need to
> write-protect large guest memory, it is the heavy work, especially, we need to
> hold mmu-lock which is also required by vcpu to fix its page table fault and
> mmu-notifier when host page is being changed. In the extreme cpu / memory used
> guest, it becomes a scalability issue.
> This patchset introduces a way to locklessly write-protect guest memory.
> Idea
> ==========
> There are the challenges we meet and the ideas to resolve them.
> 1) How to locklessly walk rmap?
> The first idea we got to prevent "desc" being freed when we are walking the
> rmap is using RCU. But when vcpu runs on shadow page mode or nested mmu mode,
> it updates the rmap really frequently.
> So we uses SLAB_DESTROY_BY_RCU to manage "desc" instead, it allows the object
> to be reused more quickly. We also store a "nulls" in the last "desc"
> (desc->more) which can help us to detect whether the "desc" is moved to anther
> rmap then we can re-walk the rmap if that happened. I learned this idea from
> nulls-list.
> Another issue is, when a spte is deleted from the "desc", another spte in the
> last "desc" will be moved to this position to replace the deleted one. If the
> deleted one has been accessed and we do not access the replaced one, the
> replaced one is missed when we do lockless walk.
> To fix this case, we do not backward move the spte, instead, we forward move
> the entry: when a spte is deleted, we move the entry in the first desc to that
> position.
> 2) How to locklessly access shadow page table?
> It is easy if the handler is in the vcpu context, in that case we can use
> walk_shadow_page_lockless_begin() and walk_shadow_page_lockless_end() that
> disable interrupt to stop shadow page be freed. But we are on the ioctl context
> and the paths we are optimizing for have heavy workload, disabling interrupt is
> not good for the system performance.
> We add a indicator into kvm struct (kvm->arch.rcu_free_shadow_page), then use
> call_rcu() to free the shadow page if that indicator is set. Set/Clear the
> indicator are protected by slot-lock, so it need not be atomic and does not
> hurt the performance and the scalability.
> 3) How to locklessly write-protect guest memory?
> Currently, there are two behaviors when we write-protect guest memory, one is
> clearing the Writable bit on spte and the another one is dropping spte when it
> points to large page. The former is easy we only need to atomicly clear a bit
> but the latter is hard since we need to remove the spte from rmap. so we unify
> these two behaviors that only make the spte readonly. Making large spte
> readonly instead of nonpresent is also good for reducing jitter.
> And we need to pay more attention on the order of making spte writable, adding
> spte into rmap and setting the corresponding bit on dirty bitmap since
> kvm_vm_ioctl_get_dirty_log() write-protects the spte based on the dirty bitmap,
> we should ensure the writable spte can be found in rmap before the dirty bitmap
> is visible. Otherwise, we cleared the dirty bitmap and failed to write-protect
> the page.
> Performance result
> ====================
> The performance result and the benchmark can be found at:
> Xiao Guangrong (15):
> KVM: MMU: properly check last spte in fast_page_fault()
> KVM: MMU: lazily drop large spte
> KVM: MMU: flush tlb if the spte can be locklessly modified
> KVM: MMU: flush tlb out of mmu lock when write-protect the sptes
> KVM: MMU: update spte and add it into rmap before dirty log
> KVM: MMU: redesign the algorithm of pte_list
> KVM: MMU: introduce nulls desc
> KVM: MMU: introduce pte-list lockless walker
> KVM: MMU: initialize the pointers in pte_list_desc properly
> KVM: MMU: allocate shadow pages from slab
> KVM: MMU: locklessly access shadow page under rcu protection
> KVM: MMU: check last spte with unawareness of mapping level
> KVM: MMU: locklessly write-protect the page
> KVM: MMU: clean up spte_write_protect
> KVM: MMU: use rcu functions to access the pointer
> arch/x86/include/asm/kvm_host.h | 7 +-
> arch/x86/kvm/mmu.c | 586 ++++++++++++++++++++++++++++++----------
> arch/x86/kvm/mmu.h | 6 +
> arch/x86/kvm/mmu_audit.c | 6 +-
> arch/x86/kvm/paging_tmpl.h | 6 +-
> arch/x86/kvm/x86.c | 34 ++-
> 6 files changed, 475 insertions(+), 170 deletions(-)
> --


 \ /
  Last update: 2013-11-03 13:41    [W:0.378 / U:1.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site