lkml.org 
[lkml]   [2013]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/3] pinctrl: single: fix DT bindings documentation
    Date
    Remove extra comma in pinctrl-single documentation.

    Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
    ---
    Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
    index 7069a0b84e3a..bc0dfdfdb148 100644
    --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
    @@ -98,7 +98,7 @@ below for more information.
    In case when one register changes more than one pin's mux the
    pinctrl-single,bits need to be used which takes three parameters:

    - pinctrl-single,bits = <0xdc 0x18, 0xff>;
    + pinctrl-single,bits = <0xdc 0x18 0xff>;

    Where 0xdc is the offset from the pinctrl register base address for the
    device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to
    --
    1.8.3.2


    \
     
     \ /
      Last update: 2013-11-28 13:01    [W:5.295 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site