lkml.org 
[lkml]   [2013]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding
Date
Add a binding that describes the Broadcom Kona USB2 PHY found
on the BCM281xx family of SoCs.

Signed-off-by: Matt Porter <matt.porter@linaro.org>
---
.../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
new file mode 100644
index 0000000..db309e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
@@ -0,0 +1,15 @@
+BROADCOM KONA USB2 PHY
+
+Required properties:
+ - compatible: brcm,kona-usb2-phy
+ - regs: offset and length of the PHY registers
+ - #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+ usbphy: usbphy@3f130000 {
+ compatible = "brcm,kona-usb2-phy";
+ reg = <0x3f130000 0x28>;
+ #phy-cells = <0>;
+ };
--
1.8.4


\
 
 \ /
  Last update: 2013-11-01 21:21    [W:0.170 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site