lkml.org 
[lkml]   [2013]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPanic in nouveau on resume after 5addcf0a
After 5addcf0a (nouveau: add runtime PM support (v0.9)) I'm getting 
kernel panics immediately after resuming from suspend. Unfortunately it
happens so early that I don't get any more info than the blinking
keyboard lights...

The nouveau tree still panics up to 2fb9d6c, which fails before I can
test it.

Any ideas?

Martin


$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM
Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core
processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC
Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230
(rev c4)
04:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet
(rev 10)


$ dmesg | grep nouveau
[ 1.816793] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e71f0a2
[ 1.816797] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 1.816800] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 1.823291] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for
image...
[ 1.871478] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 1.871481] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 1.871558] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 1.871560] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 1.871562] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 1.871564] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for
image...
[ 1.871811] nouveau 0000:01:00.0: Invalid ROM contents
[ 1.871851] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 1.871852] nouveau [ VBIOS][0000:01:00.0] checking PLATFORM for
image...
[ 1.871902] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 1.871904] nouveau [ VBIOS][0000:01:00.0] using image from PLATFORM
[ 1.872026] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 1.872031] nouveau [ VBIOS][0000:01:00.0] version 80.07.95.00.07
[ 1.959798] nouveau 0000:01:00.0: irq 43 for MSI/MSI-X
[ 1.959823] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 1.959926] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 1.959928] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 1.959930] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 1.997918] nouveau [ PTHERM][0000:01:00.0] FAN control: none /
external
[ 1.997926] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 1.997979] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.032309] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000
FAULT at 0x300000 [ IBUS ]
[ 2.032962] nouveau [ DRM] VRAM: 2048 MiB
[ 2.032966] nouveau [ DRM] GART: 1048576 MiB
[ 2.032972] nouveau E[ DRM] Pointer to TMDS table invalid
[ 2.033016] nouveau [ DRM] DCB version 4.0
[ 2.033019] nouveau E[ DRM] Pointer to flat panel table invalid
[ 2.033650] nouveau [ DRM] ACPI backlight interface available,
not registering our own
[ 2.033654] nouveau W[ DRM] voltage table 0x50 unknown
[ 2.033659] nouveau [ DRM] 2 available performance level(s)
[ 2.033662] nouveau [ DRM] 1: core 202MHz shader 405MHz memory
405MHz voltage 490mV
[ 2.033664] nouveau [ DRM] 3: core 450MHz shader 901MHz memory
1080MHz voltage 580mV
[ 2.033666] nouveau [ DRM] c:
[ 2.046248] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.046253] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0
on minor 0
[ 42.063042] nouveau E[ PBUS][0000:01:00.0] MMIO write of
0x00000000 FAULT at 0x418880 [ IBUS ]
[ 42.063087] nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4
0xbadf1000 (0x3800820c)
[ 44.064991] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
[ 44.065000] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000244
[ 44.065010] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat
0x00000000 0x00000000 0x00000000 0x00000000
[ 44.065020] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat
0x00000000 0x00000000 0x00000002 0x00000009
[ 44.065024] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
[ 44.065029] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat
0x00000000 0x00000000 0x00000000 0x00000000
[ 44.065035] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat
0x00000000 0x00000000 0x00000000 0x00000000
[ 44.065037] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16


\
 
 \ /
  Last update: 2013-10-09 22:01    [W:0.130 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site