lkml.org 
[lkml]   [2013]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: applesmc oops in 3.10/3.11
From
Date

On Oct 7, 2013, at 5:42 PM, Guenter Roeck <linux@roeck-us.net> wrote:

> On 10/02/2013 10:24 AM, Henrik Rydberg wrote:
>
>>> From 4451da32414080bd0563ee9e061f19bf90463cc5 Mon Sep 17 00:00:00 2001
>> From: Henrik Rydberg <rydberg@euromail.se>
>> Date: Wed, 2 Oct 2013 19:15:03 +0200
>> Subject: [PATCH] applesmc remedy take 2
>>
>> Conjectured problem: there are remnant bytes ready on the data line
>> which corrupts the read after a failure.
>>
>> Remedy: assuming bit0 is the read valid line, try to flush it before
>> starting a new command.
>>
>> Tests by Chris suggests reading the status is enough for the problem
>> to go away, which is consistent with a change in the SMC interface,
>> where the number of bytes to read is no longer specified, but found
>> out by reading until end of data.
>>
>> Tested on a MacBookAir3,1, but the original problem has not been
>> reproduced.
>
> So, what should we do with this patch ? Apply it ?

So far I'm getting nothing on the original machine. As of today it's applied as the last patch on 3.12.0-0.rc4.git0.1.fc20.x86_64. Unfortunately at the moment I'm a bit too dense to figure out how to get a new kernel applied to an existing live package so I can try this on a USB stick. While maybe unrelated, the oops was occurring at least 4x as often booted from USB stick media than HDD.

Chris

\
 
 \ /
  Last update: 2013-10-08 02:01    [W:0.156 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site