lkml.org 
[lkml]   [2013]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] pinctrl: Add pinctrl binding for Broadcom Capri SoCs
Date
Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Christian Daudt <bcm@fixthebug.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
---
v2: Use hyphens instead of underscore in DT property names.
---
.../bindings/pinctrl/brcm,capri-pinctrl.txt | 419 ++++++++++++++++++++
1 file changed, 419 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt
new file mode 100644
index 0000000..efee207
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt
@@ -0,0 +1,419 @@
+Broadcom Capri Pin Controller
+
+This is a pin controller for the Broadcom BCM281xx SoC family, which includes
+BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
+
+=== Pin Controller Node ===
+
+Required Properties:
+
+- compatible: Must be "brcm,capri-pinctrl".
+- reg: Base address of the PAD Controller register block and the size
+ of the block.
+
+For example, the following is the bare minimum node:
+
+ pinctrl@35004800 {
+ compatible = "brcm,capri-pinctrl";
+ reg = <0x35004800 0x430>;
+ };
+
+As a Pin Controller Device, in addition to the required properties, this node
+should also contain the pin configuration nodes that client devices reference,
+if any.
+
+=== Pin Configuration Node ===
+
+Each pin configuration node is a sub-node of the pin controller node and is a
+container of an arbitrary number of subnodes, called group nodes.
+
+Please refer to the pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the definition of a
+"pin configuration node".
+
+=== Group Node ===
+
+A group node specifies the desired pin mux and/or pin configuration for an
+arbitrary number of pins. The group node only affect the properties specified
+in the node, and has no effect on any properties that are omitted.
+
+The names of the group nodes are optional and not used. The group nodes have
+the following properties:
+
+Required Properties:
+
+- brcm,pins: Multiple strings. Specifies the name(s) of one or more pins to
+ be configured by this node.
+
+Optional Properties:
+
+- brcm,function: Multiple strings. Specifies the pin mux selection. Values are:
+ "alt1", "alt2", "alt3", "alt4"
+- brcm,hysteresis: Multiple integers, applicable to standard pins only. Turns
+ on hysteresis of input.
+ 0: TTL input, 1: Schmitt Trigger input
+- brcm,pull: Multiple integers, applicable to standard pins only. Specifies
+ pull-up or pull-down.
+ 0: neither, 1: pull-up, 2: pull-down, 3: both
+- brcm,input-dis: Multiple integers, applicable to all pins. Input disable
+ control.
+ 0: off, 1: input disabled
+- brcm,slew: Multiple integers. Slew rate of output.
+ 0: fast output, 1: normal output (most pins)
+ 0: normal output, 1: fast output (IC_DM and IC_DP)
+ 0: Fast mode, 1: High speed mode (I2C)
+- brcm,drive-str: Multiple integers. Drive strength.
+ 0: 2 mA
+ 1: 4 mA
+ 2: 6 mA
+ 3: 8 mA
+ 4: 10 mA
+ 5: 12 mA
+ 6: 14 mA
+ 7: 16 mA
+- brcm,pull-up-str: Multiple integers. Pull Up strength.
+ 0: No pull-up
+ 1: 1.2 kOhm
+ 2: 1.8 kOhm
+ 3: 720 Ohm
+ 4: 2.7 kOhm
+ 5: 831 Ohm
+ 6: 1.08 kOhm
+ 7: 568 Ohm
+- brcm,mode: Multiple integers. Mode select.
+ 0: Fast mode, 1: High Speed mode (I2C)
+
+Any optional property must have 1 or n values, where n is the number of pins
+specified in the brcm,pins property:
+- If 1 value is specified for a property, this value is applied to all pins
+ listed in the brcm,pins property.
+- If n values are specified, the i th value is applied to the i th pin, where
+ i is the index in the array of values and pins, and (0 <= i < n). This
+ provides an easy way to set different values for different pins in the same
+ group.
+
+Example:
+
+ // pin configuration node
+ dev_a_active {
+ //group node
+ grp_1 {
+ brcm,pins = "pin1", "pin2", "pin3";
+ brcm,function = "alt1";
+ brcm,drive-str = <2 4 6>;
+ brcm,slew = <1>;
+ };
+
+ grp_2 {
+ ...
+ };
+
+ ...
+ };
+
+In the example above, "dev_a_active" is a pin configuration node and has a
+number of sub-nodes. In the group node "grp_1", 3 pins are defined in the
+"brcm,pins" property. Thus, any optional properties must have either 1 or 3
+values. The "brcm,function" property has only one value, "alt1", therefore the
+pin mux selection for all 3 pins is "alt1". Similarly, "brcm,slew" has only one
+value, <1>, so all 3 pins are configured with a slew rate setting of <1>.
+"brcm,drive-str" has 3 values, and they are applied in the same order of the pins
+listed in "brcm,pins": the drive strength of "pin1" is set to <2>, <4> for
+"pin2", and <6> for "pin3". Finally, no other parameters are sepcified,
+implying no changes to any other parameters for these pins.
+
+=== Pin Names and Type ===
+
+There are 3 types of pins in the BCM281xx SoC family, each type can be
+configured by different properties in a group node. The following is a list of
+node properties applicable to different pin types.
+
+Standard pins:
+- brcm,function
+- brcm,hysteresis
+- brcm,pull
+- brcm,input-dis
+- brcm,slew
+- brcm,drive-str
+
+I2C pins:
+- brcm,function
+- brcm,input-dis
+- brcm,slew
+- brcm,pull-up-str
+
+HDMI pins:
+- brcm,function
+- brcm,input-dis
+- brcm,mode
+
+The following are valid pin names and their pin types:
+
+ "adcsync", std
+ "bat_rm", std
+ "bsc1_scl", i2c
+ "bsc1_sda", i2c
+ "bsc2_scl", i2c
+ "bsc2_sda", i2c
+ "classgpwr", std
+ "clk_cx8", std
+ "clkout_0", std
+ "clkout_1", std
+ "clkout_2", std
+ "clkout_3", std
+ "clkreq_in_0", std
+ "clkreq_in_1", std
+ "cws_sys_req1", std
+ "cws_sys_req2", std
+ "cws_sys_req3", std
+ "digmic1_clk", std
+ "digmic1_dq", std
+ "digmic2_clk", std
+ "digmic2_dq", std
+ "gpen13", std
+ "gpen14", std
+ "gpen15", std
+ "gpio00", std
+ "gpio01", std
+ "gpio02", std
+ "gpio03", std
+ "gpio04", std
+ "gpio05", std
+ "gpio06", std
+ "gpio07", std
+ "gpio08", std
+ "gpio09", std
+ "gpio10", std
+ "gpio11", std
+ "gpio12", std
+ "gpio13", std
+ "gpio14", std
+ "gps_pablank", std
+ "gps_tmark", std
+ "hdmi_scl", hdmi
+ "hdmi_sda", hdmi
+ "ic_dm", std
+ "ic_dp", std
+ "kp_col_ip_0", std
+ "kp_col_ip_1", std
+ "kp_col_ip_2", std
+ "kp_col_ip_3", std
+ "kp_row_op_0", std
+ "kp_row_op_1", std
+ "kp_row_op_2", std
+ "kp_row_op_3", std
+ "lcd_b_0", std
+ "lcd_b_1", std
+ "lcd_b_2", std
+ "lcd_b_3", std
+ "lcd_b_4", std
+ "lcd_b_5", std
+ "lcd_b_6", std
+ "lcd_b_7", std
+ "lcd_g_0", std
+ "lcd_g_1", std
+ "lcd_g_2", std
+ "lcd_g_3", std
+ "lcd_g_4", std
+ "lcd_g_5", std
+ "lcd_g_6", std
+ "lcd_g_7", std
+ "lcd_hsync", std
+ "lcd_oe", std
+ "lcd_pclk", std
+ "lcd_r_0", std
+ "lcd_r_1", std
+ "lcd_r_2", std
+ "lcd_r_3", std
+ "lcd_r_4", std
+ "lcd_r_5", std
+ "lcd_r_6", std
+ "lcd_r_7", std
+ "lcd_vsync", std
+ "mdmgpio0", std
+ "mdmgpio1", std
+ "mdmgpio2", std
+ "mdmgpio3", std
+ "mdmgpio4", std
+ "mdmgpio5", std
+ "mdmgpio6", std
+ "mdmgpio7", std
+ "mdmgpio8", std
+ "mphi_data_0", std
+ "mphi_data_1", std
+ "mphi_data_2", std
+ "mphi_data_3", std
+ "mphi_data_4", std
+ "mphi_data_5", std
+ "mphi_data_6", std
+ "mphi_data_7", std
+ "mphi_data_8", std
+ "mphi_data_9", std
+ "mphi_data_10", std
+ "mphi_data_11", std
+ "mphi_data_12", std
+ "mphi_data_13", std
+ "mphi_data_14", std
+ "mphi_data_15", std
+ "mphi_ha0", std
+ "mphi_hat0", std
+ "mphi_hat1", std
+ "mphi_hce0_n", std
+ "mphi_hce1_n", std
+ "mphi_hrd_n", std
+ "mphi_hwr_n", std
+ "mphi_run0", std
+ "mphi_run1", std
+ "mtx_scan_clk", std
+ "mtx_scan_data", std
+ "nand_ad_0", std
+ "nand_ad_1", std
+ "nand_ad_2", std
+ "nand_ad_3", std
+ "nand_ad_4", std
+ "nand_ad_5", std
+ "nand_ad_6", std
+ "nand_ad_7", std
+ "nand_ale", std
+ "nand_cen_0", std
+ "nand_cen_1", std
+ "nand_cle", std
+ "nand_oen", std
+ "nand_rdy_0", std
+ "nand_rdy_1", std
+ "nand_wen", std
+ "nand_wp", std
+ "pc1", std
+ "pc2", std
+ "pmu_int", std
+ "pmu_scl", i2c
+ "pmu_sda", i2c
+ "rfst2g_mtsloten3g", std
+ "rgmii_0_rx_ctl", std
+ "rgmii_0_rxc", std
+ "rgmii_0_rxd_0", std
+ "rgmii_0_rxd_1", std
+ "rgmii_0_rxd_2", std
+ "rgmii_0_rxd_3", std
+ "rgmii_0_tx_ctl", std
+ "rgmii_0_txc", std
+ "rgmii_0_txd_0", std
+ "rgmii_0_txd_1", std
+ "rgmii_0_txd_2", std
+ "rgmii_0_txd_3", std
+ "rgmii_1_rx_ctl", std
+ "rgmii_1_rxc", std
+ "rgmii_1_rxd_0", std
+ "rgmii_1_rxd_1", std
+ "rgmii_1_rxd_2", std
+ "rgmii_1_rxd_3", std
+ "rgmii_1_tx_ctl", std
+ "rgmii_1_txc", std
+ "rgmii_1_txd_0", std
+ "rgmii_1_txd_1", std
+ "rgmii_1_txd_2", std
+ "rgmii_1_txd_3", std
+ "rgmii_gpio_0", std
+ "rgmii_gpio_1", std
+ "rgmii_gpio_2", std
+ "rgmii_gpio_3", std
+ "rtxdata2g_txdata3g1", std
+ "rtxen2g_txdata3g2", std
+ "rxdata3g0", std
+ "rxdata3g1", std
+ "rxdata3g2", std
+ "sdio1_clk", std
+ "sdio1_cmd", std
+ "sdio1_data_0", std
+ "sdio1_data_1", std
+ "sdio1_data_2", std
+ "sdio1_data_3", std
+ "sdio4_clk", std
+ "sdio4_cmd", std
+ "sdio4_data_0", std
+ "sdio4_data_1", std
+ "sdio4_data_2", std
+ "sdio4_data_3", std
+ "sim_clk", std
+ "sim_data", std
+ "sim_det", std
+ "sim_resetn", std
+ "sim2_clk", std
+ "sim2_data", std
+ "sim2_det", std
+ "sim2_resetn", std
+ "sri_c", std
+ "sri_d", std
+ "sri_e", std
+ "ssp_extclk", std
+ "ssp0_clk", std
+ "ssp0_fs", std
+ "ssp0_rxd", std
+ "ssp0_txd", std
+ "ssp2_clk", std
+ "ssp2_fs_0", std
+ "ssp2_fs_1", std
+ "ssp2_fs_2", std
+ "ssp2_fs_3", std
+ "ssp2_rxd_0", std
+ "ssp2_rxd_1", std
+ "ssp2_txd_0", std
+ "ssp2_txd_1", std
+ "ssp3_clk", std
+ "ssp3_fs", std
+ "ssp3_rxd", std
+ "ssp3_txd", std
+ "ssp4_clk", std
+ "ssp4_fs", std
+ "ssp4_rxd", std
+ "ssp4_txd", std
+ "ssp5_clk", std
+ "ssp5_fs", std
+ "ssp5_rxd", std
+ "ssp5_txd", std
+ "ssp6_clk", std
+ "ssp6_fs", std
+ "ssp6_rxd", std
+ "ssp6_txd", std
+ "stat_1", std
+ "stat_2", std
+ "sysclken", std
+ "traceclk", std
+ "tracedt00", std
+ "tracedt01", std
+ "tracedt02", std
+ "tracedt03", std
+ "tracedt04", std
+ "tracedt05", std
+ "tracedt06", std
+ "tracedt07", std
+ "tracedt08", std
+ "tracedt09", std
+ "tracedt10", std
+ "tracedt11", std
+ "tracedt12", std
+ "tracedt13", std
+ "tracedt14", std
+ "tracedt15", std
+ "txdata3g0", std
+ "txpwrind", std
+ "uartb1_ucts", std
+ "uartb1_urts", std
+ "uartb1_urxd", std
+ "uartb1_utxd", std
+ "uartb2_urxd", std
+ "uartb2_utxd", std
+ "uartb3_ucts", std
+ "uartb3_urts", std
+ "uartb3_urxd", std
+ "uartb3_utxd", std
+ "uartb4_ucts", std
+ "uartb4_urts", std
+ "uartb4_urxd", std
+ "uartb4_utxd", std
+ "vc_cam1_scl", i2c
+ "vc_cam1_sda", i2c
+ "vc_cam2_scl", i2c
+ "vc_cam2_sda", i2c
+ "vc_cam3_scl", i2c
+ "vc_cam3_sda", i2c
--
1.7.9.5



\
 
 \ /
  Last update: 2013-10-07 21:41    [W:3.312 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site