lkml.org 
[lkml]   [2013]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] thermal: offer TI thermal support only when ARCH_OMAP2PLUS is defined
Date
On Monday, October 07, 2013 12:05:05 PM Bartlomiej Zolnierkiewicz wrote:
> On Friday, October 04, 2013 02:26:54 PM Eduardo Valentin wrote:
> > On 04-10-2013 14:22, Eduardo Valentin wrote:
> > > On 04-10-2013 08:35, Bartlomiej Zolnierkiewicz wrote:
> > >> Menu for Texas Instruments thermal support is visible on all
> > >> platforms and TI_SOC_THERMAL + TI_THERMAL config options can
> > >> be selected also on EXYNOS platform (on which ARCH_HAS_BANDGAP
> > >> config option is selected by SoCs config options to fulfill
> > >> EXYNOS_THERMAL config option dependency). Thus the code which
> > >> is never used can be build. Fix it by making TI menu dependent
> > >> on ARCH_OMAP2PLUS config option.
> > >>
> >
> >
> > Besides, you can always disable the driver if you are not interested in
> > compiling it.
>
> You should not have TI-specific drivers visible without any TI dependencies.
> ARCH_BANDGAP dependency is not enough, ARCH_BANDGAP is also used by EXYNOS

s/ARCH_BANDGAP/ARCH_HAS_BANDGAP/ of course

> to indicate thermal support. Currently you can select TI thermal drivers on
> EXYNOS platforms without any other dependencies on TI. This is just wrong,
> it can result in unused code being build currently but can result in more
> severe problems in the future (build break).

Arnd, could you please give your opinion on the issue?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


> > >> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > >> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> > >> ---
> > >> drivers/thermal/Kconfig | 1 +
> > >> 1 file changed, 1 insertion(+)
> > >>
> > >> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > >> index 57e06a9..a709c63 100644
> > >> --- a/drivers/thermal/Kconfig
> > >> +++ b/drivers/thermal/Kconfig
> > >> @@ -193,6 +193,7 @@ config X86_PKG_TEMP_THERMAL
> > >> notification methods.
> > >>
> > >> menu "Texas Instruments thermal drivers"
> > >> +depends on ARCH_OMAP2PLUS
> > >
> > > No, this driver is not for ARCH_OMAP*, but for TI bandgap, with the
> > > option to offer thermal control. So, the HW supported is TI bandgap IP,
> > > not ARCH_OMAP*. It happens to be so that OMAP2PLUS all have a
> > > (different) version of this device.
> > >
> > > However, DRA7 devices, for instance, also feature the bandgap IP
> > > (different version of those present in OMAP devices), and it is not
> > > ARCH_OMAP2PLUS.
> > >
> > > And because of that, the design of this driver is different. It is not
> > > expected to depend on an arch, but the arch code is expected to select
> > > ARCH_HAS_BANDGAP.
> > >
> > >> source "drivers/thermal/ti-soc-thermal/Kconfig"
> > >> endmenu
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics



\
 
 \ /
  Last update: 2013-10-07 13:21    [W:0.052 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site