lkml.org 
[lkml]   [2013]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: mmap for /proc/vmcore broken since 3.12-rc1
(2013/10/03 15:12), HATAYAMA Daisuke wrote:
> (2013/10/02 21:03), Michael Holzheu wrote:
>> Hello Alexey,
>>
>> Looks like the following commit broke mmap for /proc/vmcore:
>>
>> commit c4fe24485729fc2cbff324c111e67a1cc2f9adea
>> Author: Alexey Dobriyan <adobriyan@gmail.com>
>> Date: Tue Aug 20 22:17:24 2013 +0300
>>
>> sparc: fix PCI device proc file mmap(2)
>>
>> Because /proc/vmcore (fs/proc/vmcore.c) does not implement the
>> get_unmapped_area() fops function mmap now always returns EIO.
>>
>> Michael
>>
>
> I confirmed the bug on v3.12-rc3. According to makedumpfile's log,
> mmap failed on /proc/vmcore.
>
> mem_map (271)
> mem_map : ffffea001da40000
> pfn_start : 878000
> pfn_end : 880000
> Kernel can't mmap vmcore, using reads.
> STEP [Excluding unnecessary pages] : 1.268799 seconds
> STEP [Excluding unnecessary pages] : 1.268756 seconds
> STEP [Copying data ] : 44.847924 seconds
> Writing erase info...
>
> I'll post a patch later.
>

I've not completed this. I thought it was short task but after I
tried to fix, makedumpfile became frequently failing with -ENOMEM and
I'm not sure why even now.

Here's current progress.

First, on v3.12-rc3 mmap() on /proc/vmcore fails while returning -EIO.
This is due to the commit c4fe24485729fc2cbff324c111e67a1cc2f9adea,
just as reported by Holzheu, where proc_reg_get_unmapped_area was
newly added to proc_reg_file_ops_no_compat file operations as
get_unmapped_area method. Looking at get_unmapped_area function,
it calls current->mm->get_unmapped_area at default, but calls
f_ops->get_unmapped_area_function if it's assigned.

get_area = current->mm->get_unmapped_area;
if (file && file->f_op && file->f_op->get_unmapped_area)
get_area = file->f_op->get_unmapped_area;
addr = get_area(file, addr, len, pgoff, flags);
if (IS_ERR_VALUE(addr))
return addr;

For regular files in procfs, proc_reg_file_ops_no_compat is used
first and then this behaves as wrapper.

static unsigned long proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr, unsigned long len, unsigned long pgoff, unsigned long flags)
{
struct proc_dir_entry *pde = PDE(file_inode(file));
int rv = -EIO;
unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
if (use_pde(pde)) {
get_unmapped_area = pde->proc_fops->get_unmapped_area;
if (get_unmapped_area)
rv = get_unmapped_area(file, orig_addr, len, pgoff, flags);
unuse_pde(pde);
}
return rv;
}

Since this was added in proc_reg_file_ops_no_compat, proc_reg_get_unmapped_area
is used in get_unmapped_area now and it always returns -EIO since proc_vmcore_operations
has no get_unmapped_area method now.

So, immediate fix idea is to define get_unmapped_area method in proc_vmcore_operations
and to design it so that it just calls current->mm->get_unmapped_area.

---
fs/proc/vmcore.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 9100d69..9583419 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -412,10 +412,23 @@ static int mmap_vmcore(struct file *file, struct vm_area_struct *vma)
}
#endif

+static unsigned long
+get_unmapped_area_vmcore(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
+{
+#ifdef CONFIG_MMU
+ return current->mm->get_unmapped_area(filp, addr, len, pgoff, flags);
+#else
+ return -EIO;
+#endif
+}
+
static const struct file_operations proc_vmcore_operations = {
.read = read_vmcore,
.llseek = default_llseek,
.mmap = mmap_vmcore,
+ .get_unmapped_area = get_unmapped_area_vmcore,
};

static struct vmcore* __init get_new_element(void)
--
1.8.3.1
However, after applying this patch, makedumpfile now somehow fails returning -ENOMEM
frequently. It's about 50/128 on my box.

Searching for where to return -ENOMEM in mmap path by printk debug, I found instance
of get_unmapped_area returns kernel-space address:

get_area = current->mm->get_unmapped_area;
if (file && file->f_op && file->f_op->get_unmapped_area)
get_area = file->f_op->get_unmapped_area;
addr = get_area(file, addr, len, pgoff, flags);
if (IS_ERR_VALUE(addr))
return addr;
if (addr > TASK_SIZE - len) <---- Here
return -ENOMEM;
The log is:

kdump:/# cd /mnt/
kdump:/mnt# for ((i=0; i<128; ++i)) ; do
> makedumpfile -f -p -d 31 /proc/vmcore vmcore-pd31
> done
The kernel version is not supported.
The created dumpfile may be incomplete.
cyclic buffer size has been changed: 65535 => 64512
[ 49.462536] addr: 0xffffffff8ef28000
[ 49.463686] TASK_SIZE: 0x007ffffffff000
[ 49.464952] len: 0x00000000400000
Note that makedumpfile tries to mmap some area in 4MiB size here,
get_unmapped_area tries to find some area to cover such requested 4MiB size
within user-space address space limit but it returns somehow kernel-space
address.

The actual instance of current->mm->get_unmapped_area on my environment
is arch_get_unmapped_area_topdown.

Finally, note: I tried to run makedumpfile using mmap on /proc/vmcore 128-times. Then,
- v3.12-rc3 returns -EIO in every case (trivial),
- v3.12-rc3 with the above patch applied returns -ENOMEM at 50/128,
- v3.12-rc3 with commit c4fe24485729fc2cbff324c111e67a1cc2f9adea reverted
works well in every case, and
- v3.11.1-201.fc19.x86_64 works well in every case.

So, I suspect procfs wrapper affects arch_get_unmapped_region_topdown?

Any comments are helpful.

--
Thanks.
HATAYAMA, Daisuke



\
 
 \ /
  Last update: 2013-10-07 05:01    [W:0.061 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site