lkml.org 
[lkml]   [2013]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [RFC/RFT v2 0/4] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support
    From
    Date
    Anssi,

    Your patch has been applied on 3.11.3


    >
    > I'm especially interested in testers with:
    >
    > - Older codecs other than 0x1002aa01. My best guess still is that the
    > new code works on them as well.
    > o On these I'd like to know if multichannel and the new formats
    > work, i.e. e.g.
    > speaker-test -D hdmi:CARD=Generic,DEV=0 -c8 -r192000 -F S32_LE

    This is working with Codec 0x1002aa01 revisions 0x100300 (Rev ID 3)
    except for a small detail. I cannot tell if it is a regression from v1
    of the patch or it was there and I did not noticed when I tested.

    Rear left and rear right channels are flipped.

    >
    > - Codec 0x1002aa01 revisions 0x100300 (Rev ID 3) or later (see
    > /proc/asound/cardX/codec#Y). These are HD7750+ I think. Stuff to be
    > tested on these:
    > o The ramp up/down stuff, i.e. patch 4. Is there any difference seen
    > with these, in the beginning/end (i.e. fade-out/in):
    > speaker-test -D hdmi:CARD=Generic,DEV=0,AES0=0x04 -c2 -r48000

    No noticeable difference than when it is run without the AES0 param

    > speaker-test -D hdmi:CARD=Generic,DEV=0,AES0=0x06 -c2 -r48000

    From the application the sound is sent normally but no sound at all is
    outputed from the speakers.

    > Also, is there a difference in the beginning of these
    > (maybe garbage sound and/or slightly slower startup?):
    > aplay -Dhdmi:CARD=Generic,DEV=0,AES0=4 -r44100 -f s16_le -c2 testi.dts.cut.spdif
    > aplay -Dhdmi:CARD=Generic,DEV=0,AES0=6 -r44100 -f s16_le -c2 testi.dts.cut.spdif

    Both works. No garbage is heard from neither of them. maybe maybe AES04
    starts playing few ms earlier but if there is a difference, it is
    extremely subtle.
    >
    > o Contents of /proc/asound/cardX/eld#0. I'd like to see the contents
    > both with radeon and with the proprietary fglrx driver in use
    >
    With fglrx 13.10 Beta 2:

    lano1106@whippet2 /proc/asound/card0 $ cat codec#0
    Codec: ATI R6xx HDMI
    Address: 0
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x1002aa01
    Subsystem Id: 0x00aa0100
    Revision Id: 0x100300
    No Modem Function Group found
    Default PCM:
    rates [0x70]: 32000 44100 48000
    bits [0x2]: 16
    formats [0x5]: PCM AC3
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    State of AFG node 0x01:
    Power states: D0 D3 CLKSTOP EPSS
    Power: setting=D0, actual=D0, Clock-stop-OK
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x02 [Audio Output] wcaps 0x221: Stereo Digital Stripe
    Converter: stream=1, channel=0
    Digital: Enabled
    Digital category: 0x0
    IEC Coding Type: 0x0
    Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x02
    Node 0x04 [Audio Output] wcaps 0x221: Stereo Digital Stripe
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    IEC Coding Type: 0x0
    Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
    Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=1, device=0
    Control: name="IEC958 Playback Pro Mask", index=1, device=0
    Control: name="IEC958 Playback Default", index=1, device=0
    Control: name="IEC958 Playback Switch", index=1, device=0
    Control: name="ELD", index=0, device=7
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=02, enabled=1
    Connection: 1
    0x04
    Node 0x06 [Audio Output] wcaps 0x221: Stereo Digital Stripe
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    IEC Coding Type: 0x0
    Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
    Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=2, device=0
    Control: name="IEC958 Playback Pro Mask", index=2, device=0
    Control: name="IEC958 Playback Default", index=2, device=0
    Control: name="IEC958 Playback Switch", index=2, device=0
    Control: name="ELD", index=0, device=8
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=03, enabled=1
    Connection: 1
    0x06
    Node 0x08 [Audio Output] wcaps 0x221: Stereo Digital Stripe
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    IEC Coding Type: 0x0
    Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
    Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=3, device=0
    Control: name="IEC958 Playback Pro Mask", index=3, device=0
    Control: name="IEC958 Playback Default", index=3, device=0
    Control: name="IEC958 Playback Switch", index=3, device=0
    Control: name="ELD", index=0, device=9
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=04, enabled=1
    Connection: 1
    0x08
    Node 0x0a [Audio Output] wcaps 0x221: Stereo Digital Stripe
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    IEC Coding Type: 0x0
    Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
    Control: name="HDMI/DP,pcm=10 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=4, device=0
    Control: name="IEC958 Playback Pro Mask", index=4, device=0
    Control: name="IEC958 Playback Default", index=4, device=0
    Control: name="IEC958 Playback Switch", index=4, device=0
    Control: name="ELD", index=0, device=10
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=05, enabled=1
    Connection: 1
    0x0a
    Node 0x0c [Audio Output] wcaps 0x221: Stereo Digital Stripe
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    IEC Coding Type: 0x0
    Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
    Control: name="HDMI/DP,pcm=11 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=5, device=0
    Control: name="IEC958 Playback Pro Mask", index=5, device=0
    Control: name="IEC958 Playback Default", index=5, device=0
    Control: name="IEC958 Playback Switch", index=5, device=0
    Control: name="ELD", index=0, device=11
    Pincap 0x00000094: OUT Detect HDMI
    Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=06, enabled=1
    Connection: 1
    0x0c




    \
     
     \ /
      Last update: 2013-10-04 10:01    [W:2.339 / U:0.180 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site