lkml.org 
[lkml]   [2013]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 0/4] Exynos 5410 Dual cluster support
Date
Hi Mauro,

Mauro Ribeiro <mdrjr0@gmail.com> writes:

> Kevin,
>
> https://github.com/hardkernel/u-boot/tree/odroid-v2012.07

Yes, this is the one I'm using, but USB networking doesn't seem to work
with that. Do you have USB networking working with that u-boot? If so,
what changes to the config did you make?

Kevin

>
> On Thu, Oct 17, 2013 at 5:00 PM, Kevin Hilman <khilman@linaro.org> wrote:
>
>> Aliaksei Katovich <aliaksei.katovich@gmail.com> writes:
>>
>> > hi Kevin;
>> >
>> >> Vyacheslav Tyrtov <v.tyrtov@samsung.com> writes:
>> >>
>> >> > The series of patches represent support of Exynos 5410 SoC
>> >> >
>> >> > The Exynos 5410 is the first Samsung SoC based on bigLITTLE
>> architecture.
>> >> > Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same
>> time
>> >> >
>> >> > Patches add new platform description, support of clock controller,
>> >> > dual cluster support and device tree for Exynos 5410
>> >> >
>> >> > Has been build on v3.12-rc5.
>> >> > Has been tested on Exynos 5410 reference board (exynos_defconfig).
>> >>
>> >> Has anyone tried this on the exynos5410 based odroid-xu yet?
>> >>
>> >> I tried booting this on my recently arrived odroid-xu, but am not
>> >> getting it to boot.
>> >
>> > I am able to boot my odroid-xu+e to busybox with these patches
>> applied
>> > against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were
>> > used.
>> >
>> > However there seem to be some issues with virq allocations, like
>> this:
>>
>> Ah, I've seen the same thing, but for me it doesn't boot reliably.
>> Sometimes there's an immediate fault like this[1], and once in a rare
>> while, it starts to boot and I see the same virq errors.
>>
>> Curious what you guys are using for boot loaders. I found some
>> pre-build u-boot binaries along with the necessary BL1/2 binary blobs in
>> the hardkernel kernel repo: https://github.com/hardkernel/linux.git
>> branch: origin/odroidxu-3.4.y
>> path: tools/hardkernel/u-boot-pre-built
>>
>> Unfortunatly, that u-boot doesn't have usb networking support built in
>> so I couln't use u-boot to tftp the kernel, so I was able to use fasboot
>> to load the kernel/ramdisk, but it's very flaky.
>>
>> Do you have an pointers of where to get a known working bootloader.
>> Ideally, a u-boot with networking/tftp support would be ideal.
>>
>> Thanks,
>>
>> Kevin
>>
>> [1]
>> USB cable Connected![0x4]
>> Starting download of 10008576 bytes
>> .........
>> downloading of 10008576 bytes finished
>> Kernel size: 00296bc5
>> Ramdisk size: 006f3c00
>> Booting kernel..
>> ## Booting kernel from Legacy Image at 40008000 ...
>> Image Name: Linux
>> Image Type: ARM Linux Kernel Image (uncompressed)
>> Data Size: 2714501 Bytes = 2.6 MiB
>> Load Address: 40008000
>> Entry Point: 40008000
>> Verifying Checksum ... OK
>> XIP Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> undefined instruction
>> pc : [<4000800c>] lr : [<bfc65df4>]
>> sp : bfb5bbc8 ip : 00000000 fp : 00001251
>> r10: 00000000 r9 : 00000000 r8 : bfb5bf30
>> r7 : 00000000 r6 : 00000000 r5 : 40008000 r4 : bfcabac0
>> r3 : bfb5bfa8 r2 : 40000100 r1 : 00001251 r0 : 00000000
>> Flags: nZCv IRQs off FIQs off Mode SVC_32
>> Resetting CPU ...
>>
>> emmc resetting ...
>> resetting ...
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>


\
 
 \ /
  Last update: 2013-10-31 01:21    [W:0.078 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site