lkml.org 
[lkml]   [2013]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 04/10] spmi: Add MSM PMIC Arbiter SPMI controller
On Wed, Oct 30, 2013 at 11:05:36AM -0700, Stephen Boyd wrote:
> On 10/28, Josh Cartwright wrote:
> > +
> > +/**
> > + * pa_write_data: write 1..4 bytes from buf to pmic-arb's register
> > + * @bc byte-count -1. range: 0..3
> > + * @reg register's address
> > + * @buf buffer to write. length must be bc+1
>
> Missing colon between variable and description.

I'll clean the documentation up a bit and push it all to the
implementation (as suggested in a previous review).

[..]
> > + if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
> > + dev_err(&ctrl->dev,
> > + "pmic-arb supports 1..%d bytes per trans, but:%d requested",
>
> Nitpick: Please replace the colon between but and %d with a space.
>
> > + PMIC_ARB_MAX_TRANS_BYTES, bc+1);
>
> Space around that '+' please.

Sure.

> > + return -EINVAL;
> > + }
> > + dev_dbg(&ctrl->dev,
> > + "op:0x%x sid:%d bc:%d addr:0x%x\n", opc, sid, bc, addr);
> > +
> > + /* Check the opcode */
> > + if (opc >= 0x60 && opc <= 0x7F)
> > + opc = PMIC_ARB_OP_READ;
> > + else if (opc >= 0x20 && opc <= 0x2F)
> > + opc = PMIC_ARB_OP_EXT_READ;
> > + else if (opc >= 0x38 && opc <= 0x3F)
> > + opc = PMIC_ARB_OP_EXT_READL;
> > + else
> > + return -EINVAL;
> > +
> > + cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
> > +
> > + spin_lock_irqsave(&pmic_arb->lock, flags);
> > + pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
> > + rc = pmic_arb_wait_for_done(ctrl);
> > + if (rc)
> > + goto done;
> > +
> > + /* Read from FIFO, note 'bc' is actually number of bytes minus 1 */
> > + pa_read_data(pmic_arb, buf, PMIC_ARB_RDATA0(pmic_arb->channel)
> > + , min_t(u8, bc, 3));
>
> Nitpick: Weird comma starting a line here.

Okay.

[..]
> > +static int __exit spmi_pmic_arb_remove(struct platform_device *pdev)
>
> __exit shouldn't be here. We want this function in modules.
>
> > +{
> > + struct spmi_controller *ctrl = platform_get_drvdata(pdev);
> > + spmi_controller_remove(ctrl);
> > + return 0;
> > +}
> > +
> > +static struct of_device_id spmi_pmic_arb_match_table[] = {
> > + { .compatible = "qcom,spmi-pmic-arb", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
> > +
> > +static struct platform_driver spmi_pmic_arb_driver = {
> > + .probe = spmi_pmic_arb_probe,
> > + .remove = __exit_p(spmi_pmic_arb_remove),
>
> Please drop this __exit_p() usage as well.
>
> > + .driver = {
> > + .name = "spmi_pmic_arb",
> > + .owner = THIS_MODULE,
> > + .of_match_table = spmi_pmic_arb_match_table,
> > + },
> > +};
> > +module_platform_driver(spmi_pmic_arb_driver);
>
> MODULE_LICENSE()
> MODULE_ALIAS()

Yep, will re-add. Not sure why I dropped these...

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2013-10-30 20:41    [W:0.187 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site