lkml.org 
[lkml]   [2013]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFCv2][PATCHv5 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.
Date
This adds devicetree node for VF610, and there are 8 channels supported
by default.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
arch/arm/boot/dts/vf610.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 67d929c..ec12397 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -140,6 +140,16 @@
clock-names = "pit";
};

+ pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40038000 0x1000>;
+ clock-names = "ftm0", "ftm0_counter";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0>;
+ status = "disabled";
+ };
+
wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
--
1.8.4



\
 
 \ /
  Last update: 2013-10-30 08:21    [W:0.083 / U:7.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site