lkml.org 
[lkml]   [2013]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 09/10] mfd: pm8x41: document device tree bindings
From
Date

Hi,

On Tue, 2013-10-29 at 10:05 -0500, Josh Cartwright wrote:
> On Tue, Oct 29, 2013 at 04:18:35PM +0200, Ivan T. Ivanov wrote:
> > On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote:
> > > Document the bindings used to describe the Qualcomm 8x41 PMICs.
> > >
> > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
> > > ---
> > > Documentation/devicetree/bindings/mfd/pm8x41.txt | 33 ++++++++++++++++++++++++
> > > 1 file changed, 33 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/pm8x41.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/mfd/pm8x41.txt b/Documentation/devicetree/bindings/mfd/pm8x41.txt
> > > new file mode 100644
> > > index 0000000..6afd4ce
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mfd/pm8x41.txt
> > > @@ -0,0 +1,33 @@
> > > +Qualcomm PM8841 and PM8941 PMIC multi-function devices
> > > +
> > > +The PM8x41 PMICs are used with the Qualcomm Snapdragon 800 series SoCs, and are
> > > +interfaced to the chip via the SPMI (System Power Management Interface) bus.
> > > +Support for multiple independent functions are implemented by splitting the
> > > +16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> > > +each. A function can consume one or more of these fixed-size register regions.
> > > +
> > > +Required properties:
> > > +- compatible: Must be one of:
> > > + "qcom,pm8841"
> > > + "qcom,pm8941"
> > > +- reg: Specifies the SPMI USID slave address for this device
> > > +- #address-cells = <1>
> > > +- #size-cells = <0>
> > > +
> > > +Each child node represents a function of the PM8x41. Each child 'reg' entry
> > > +describes an offset within the USID slave address where the region starts.
> > > +
> > > +Example:
> > > +
> > > +pm8941@0 {
> > > + compatible = "qcom,pm8941";
> > > + reg = <0x0>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + rtc {
> > > + compatible = "qcom,pm8941-rtc";
> > > + reg = <0x6000 0x6100>;
> >
> > This doesn't look right. Probably #size-cells have to be <1>?
>
> Some functions of the PMIC actually consume more than one fixed-size
> region of the slave address space. This example is showing one such
> peripheral (consuming the region starting at 0x6000 and another at
> 0x6100).
>

Ok. Thanks for clarification.

Regards,
Ivan





\
 
 \ /
  Last update: 2013-10-29 16:41    [W:0.084 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site