[lkml]   [2013]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 3/4] mfd: AS3722: add dt node properties for system power controller
ams AS3722 device supports the power off by turning off its all rails.

Add dt node properties to enable this functionality on this device.

Signed-off-by: Laxman Dewangan <>
Documentation/devicetree/bindings/mfd/as3722.txt | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
index e782f39..1a2fa8a 100644
--- a/Documentation/devicetree/bindings/mfd/as3722.txt
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -121,6 +121,15 @@ The device node should have the optional properties to support the clock:
#clock-cells: from common clock binding; shall be set to 1. The clock id for
single clock output is 0.

+AS3722 supports the system power off by turning off all its rail. The power off
+is provided through pm power off.
+The device node should have the following properties to enable power-off
+functionality from ams AS3722:
+ams,system-power-controller: To enable the power off functionality through
+ device.
#include <dt-bindings/mfd/as3722.h>

 \ /
  Last update: 2013-10-29 14:41    [W:0.074 / U:29.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site