lkml.org 
[lkml]   [2013]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: ELAN Touchscreen regression in recent 3.12 rc's? (USB)
From
On Mon, Oct 28, 2013 at 5:02 PM, Kevin Fenzi <kevin@scrye.com> wrote:
> Greetings.
>
> I have a lenovo yoga 2 pro.. it has a ELAN Touchscreen.
>
> In 3.12rc5 it was detected and works.
> in 3.12rc6 it was detected and works.
>
> Sometime after the rc6 timeframe it stopped working. It doesn't work with
> rc7.
>
> In dmesg I get:
>
> [ 159.519663] usb 2-7: New USB device found, idVendor=04f3, idProduct=016f
> [ 159.519681] usb 2-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
> [ 159.519683] usb 2-7: Product: Touchscreen
> [ 159.519685] usb 2-7: Manufacturer: ELAN
> [ 159.519901] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
> [ 159.528027] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input20
> [ 159.528544] hid-multitouch 0003:04F3:016F.000A: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
> [ 161.601423] usb 2-7: USB disconnect, device number 71
> [ 161.896828] usb 2-7: new full-speed USB device number 72 using xhci_hcd
> [ 163.991296] usb 2-7: unable to read config index 0 descriptor/start: -71
> [ 163.991301] usb 2-7: can't read configurations, error -71
> [ 164.143686] usb 2-7: new full-speed USB device number 73 using xhci_hcd
> [ 166.239273] usb 2-7: unable to read config index 0 descriptor/start: -71
> [ 166.239278] usb 2-7: can't read configurations, error -71
> [ 166.392576] usb 2-7: new full-speed USB device number 74 using xhci_hcd
> [ 168.487051] usb 2-7: unable to read config index 0 descriptor/start: -71
> [ 168.487058] usb 2-7: can't read configurations, error -71
> [ 168.640308] usb 2-7: new full-speed USB device number 75 using xhci_hcd
> [ 170.734850] usb 2-7: unable to read config index 0 descriptor/start: -71
> [ 170.734856] usb 2-7: can't read configurations, error -71
> [ 170.734927] hub 2-0:1.0: unable to enumerate USB device on port 7
> [ 171.022134] usb 2-7: new full-speed USB device number 76 using xhci_hcd
> [ 173.116744] usb 2-7: unable to read config index 0 descriptor/start: -71
> [ 173.116750] usb 2-7: can't read configurations, error -71
> [ 173.269840] usb 2-7: new full-speed USB device number 77 using xhci_hcd
> [ 173.282520] usb 2-7: New USB device found, idVendor=04f3, idProduct=016f
> [ 173.282526] usb 2-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
> [ 173.282528] usb 2-7: Product: Touchscreen
> [ 173.282530] usb 2-7: Manufacturer: ELAN
> [ 173.282782] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
> [ 173.290920] input: ELAN Touchscreen
> as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21
>
> So it seems to be bouncing in and out (but never long enough to actually work).
>
> Could be a regression in xhci_hcd?

Hm. There were no changes in drivers/usb from -rc6 to -rc7, so if
-rc6 works then I doubt it's xhci_hcd. There were two touchscreen
quirks added between those two rcs though, so perhaps one of those
broke this.

684524d35fe8d13be1f2649633e43bd02c96c695 HID: usbhid: quirk for SiS Touchscreen
8171a67d587a09e14a4949a81e070345fedcf410 HID: usbhid: quirk for
Synaptics Large Touchccreen

CC'd AceLan and Jiri.

josh


\
 
 \ /
  Last update: 2013-10-29 13:41    [W:0.101 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site