lkml.org 
[lkml]   [2013]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] clk/zynq/clkc: Add 'fclk-enable' feature
From
Date

On Oct 28, 2013, at 5:17 PM, Tomasz Figa wrote:

>>>> diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt
>>>> b/Documentation/devicetree/bindings/clock/zynq-7000.txt index
>>>> d99af878f5d7..11fdd146ec83 100644
>>>> --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt
>>>> +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
>>>>
>>>> @@ -22,6 +22,10 @@ Required properties:
>>>> Optional properties:
>>>> - clocks : as described in the clock bindings
>>>> - clock-names : as described in the clock bindings
>>>>
>>>> + - fclk-enable : Bit mask to enable FCLKs in cases no proper CCF
>>>
>>> Since it's a vendor specific property, it should include vendor
>>> prefix.
>>
>> The whole driver is vendor specific. Should there really be another
>> prefix for that property?
>
> Yes. If a property is introduced just for use by this particular driver
> then it must be prepended by a vendor prefix. That's a general rule.

Most all nodes are vendor specific by definition ;).

- k

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation



\
 
 \ /
  Last update: 2013-10-29 09:41    [W:0.074 / U:8.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site