lkml.org 
[lkml]   [2013]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/12] clocksource: sh_cmt: Add clk_prepare/unprepare support
Date
Prepare the clock at probe time, as there is no other appropriate place
in the driver where we're allowed to sleep.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/clocksource/sh_cmt.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 0965e98..940341a 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -634,12 +634,18 @@ static int sh_cmt_clock_event_next(unsigned long delta,

static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
{
- pm_genpd_syscore_poweroff(&ced_to_sh_cmt(ced)->pdev->dev);
+ struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+ pm_genpd_syscore_poweroff(&p->pdev->dev);
+ clk_unprepare(p->clk);
}

static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
{
- pm_genpd_syscore_poweron(&ced_to_sh_cmt(ced)->pdev->dev);
+ struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+ clk_prepare(p->clk);
+ pm_genpd_syscore_poweron(&p->pdev->dev);
}

static void sh_cmt_register_clockevent(struct sh_cmt_priv *p,
@@ -737,6 +743,10 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
goto err2;
}

+ ret = clk_prepare(p->clk);
+ if (ret < 0)
+ goto err3;
+
if (res2 && (resource_size(res2) == 4)) {
/* assume both CMSTR and CMCSR to be 32-bit */
p->read_control = sh_cmt_read32;
@@ -773,19 +783,21 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
cfg->clocksource_rating);
if (ret) {
dev_err(&p->pdev->dev, "registration failed\n");
- goto err3;
+ goto err4;
}
p->cs_enabled = false;

ret = setup_irq(irq, &p->irqaction);
if (ret) {
dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- goto err3;
+ goto err4;
}

platform_set_drvdata(pdev, p);

return 0;
+err4:
+ clk_unprepare(p->clk);
err3:
clk_put(p->clk);
err2:
--
1.8.1.5


\
 
 \ /
  Last update: 2013-10-29 00:41    [W:0.099 / U:9.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site