lkml.org 
[lkml]   [2013]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] pinctrl: imx: fix using pin->input_val wrongly
Date
The commit: "pinctrl: imx: Use struct type for pins" relaced
pin->input_reg by pin->input_val wrongly, fix it at this commit.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
drivers/pinctrl/pinctrl-imx.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index d78dd81..4779b8e 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -245,11 +245,11 @@ static int imx_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
* The input_reg[i] here is actually some IOMUXC general
* purpose register, not regular select input register.
*/
- val = readl(ipctl->base + pin->input_val);
+ val = readl(ipctl->base + pin->input_reg);
val &= ~mask;
val |= select << shift;
- writel(val, ipctl->base + pin->input_val);
- } else if (pin->input_val) {
+ writel(val, ipctl->base + pin->input_reg);
+ } else if (pin->input_reg) {
/*
* Regular select input register can never be at offset
* 0, and we only print register value for regular case.
--
1.7.1



\
 
 \ /
  Last update: 2013-10-28 07:41    [W:0.060 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site