lkml.org 
[lkml]   [2013]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] serial: omap: fix a few checkpatch warnings
Date
Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com>
---
drivers/tty/serial/omap-serial.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 02cb61e..bf00477 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -175,7 +175,7 @@ struct uart_omap_port {
bool is_suspending;
};

-#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
+#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))

static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];

@@ -242,9 +242,9 @@ serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud)
unsigned int n16 = port->uartclk / (16 * baud);
int baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
int baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
- if(baudAbsDiff13 < 0)
+ if (baudAbsDiff13 < 0)
baudAbsDiff13 = -baudAbsDiff13;
- if(baudAbsDiff16 < 0)
+ if (baudAbsDiff16 < 0)
baudAbsDiff16 = -baudAbsDiff16;

return (baudAbsDiff13 >= baudAbsDiff16);
@@ -301,9 +301,8 @@ static void serial_omap_stop_tx(struct uart_port *port)
serial_out(up, UART_OMAP_SCR, up->scr);
res = (up->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0;
if (gpio_get_value(up->rts_gpio) != res) {
- if (up->rs485.delay_rts_after_send > 0) {
+ if (up->rs485.delay_rts_after_send > 0)
mdelay(up->rs485.delay_rts_after_send);
- }
gpio_set_value(up->rts_gpio, res);
}
} else {
@@ -407,9 +406,8 @@ static void serial_omap_start_tx(struct uart_port *port)
res = (up->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0;
if (gpio_get_value(up->rts_gpio) != res) {
gpio_set_value(up->rts_gpio, res);
- if (up->rs485.delay_rts_before_send > 0) {
+ if (up->rs485.delay_rts_before_send > 0)
mdelay(up->rs485.delay_rts_before_send);
- }
}
}

@@ -1686,8 +1684,9 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.uartclk = omap_up_info->uartclk;
if (!up->port.uartclk) {
up->port.uartclk = DEFAULT_CLK_SPEED;
- dev_warn(&pdev->dev, "No clock speed specified: using default:"
- "%d\n", DEFAULT_CLK_SPEED);
+ dev_warn(&pdev->dev,
+ "No clock speed specified: using default: %d\n"
+ DEFAULT_CLK_SPEED);
}

up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
--
1.8.4.1


\
 
 \ /
  Last update: 2013-10-24 01:21    [W:0.031 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site