lkml.org 
[lkml]   [2013]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH v2 2/6] ARM: dts: Specify clocks for UARTs on bcm11351
From
On Thu, Oct 17, 2013 at 6:56 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> On Wed, Oct 16, 2013 at 10:47:06PM +0100, Tim Kryger wrote:
>> Rather than declaring the frequency of the external clock, specify the
>> label of the clock such that the driver may determine the frequency on
>> its own.
>
> Nit: we're not specifying the label of the clock. Clocks are represented
> py a phand+args pair, and the important part is that we're specifying
> the clock itself.
>
> How about something like:
>
> ---->8----
> Currently the rate of the external clock input to "snps,dw-apb-uart"
> devices is described by a clock-frequency property rather than by
> reference to the clock itself.
>
> This patch changes the "snps,dw-apb-uart" entries in bcm11351.dtsi to
> refer to the parent clock directly, following the common clock bindings.
> ---->8----

Would this be acceptable?

The frequency property in "snps,dw-apb-uart" entries are no longer
required if the rate of the external clock can be determined using the
clk api (see e302cd9 serial: 8250_dw: add support for clk api).

This patch replaces the frequency property in the UART nodes of
bcm11351.dtsi with references to the relevant clocks following the
common clock binding.

>
> Also, this should probably be moved after the driver change, so as to
> not be unbootable temporarily.

The driver change was part of v3.10 so there is no issue here.

>
> Thanks,
> Mark.
>
>>
>> Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
>> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
>> Reviewed-by: Matt Porter <matt.porter@linaro.org>
>> ---
>> arch/arm/boot/dts/bcm11351.dtsi | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
>> index c6464fb..ce65367 100644
>> --- a/arch/arm/boot/dts/bcm11351.dtsi
>> +++ b/arch/arm/boot/dts/bcm11351.dtsi
>> @@ -43,7 +43,7 @@
>> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
>> status = "disabled";
>> reg = <0x3e000000 0x1000>;
>> - clock-frequency = <13000000>;
>> + clocks = <&uartb_clk>;
>> interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
>> reg-shift = <2>;
>> reg-io-width = <4>;
>> @@ -53,7 +53,7 @@
>> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
>> status = "disabled";
>> reg = <0x3e001000 0x1000>;
>> - clock-frequency = <13000000>;
>> + clocks = <&uartb2_clk>;
>> interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
>> reg-shift = <2>;
>> reg-io-width = <4>;
>> @@ -63,7 +63,7 @@
>> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
>> status = "disabled";
>> reg = <0x3e002000 0x1000>;
>> - clock-frequency = <13000000>;
>> + clocks = <&uartb3_clk>;
>> interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
>> reg-shift = <2>;
>> reg-io-width = <4>;
>> @@ -73,7 +73,7 @@
>> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
>> status = "disabled";
>> reg = <0x3e003000 0x1000>;
>> - clock-frequency = <13000000>;
>> + clocks = <&uartb4_clk>;
>> interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
>> reg-shift = <2>;
>> reg-io-width = <4>;
>> --
>> 1.8.0.1
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2013-10-21 21:21    [W:0.048 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site