lkml.org 
[lkml]   [2013]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH RFC 05/77] PCI/MSI: Convert pci_msix_table_size() to a public interface
    Date
    Make pci_msix_table_size() to return a error code if the device
    does not support MSI-X. This update is needed to facilitate a
    forthcoming re-design MSI/MSI-X interrupts enabling pattern.

    Device drivers will use this interface to obtain maximum number
    of MSI-X interrupts the device supports and use that value in
    the following call to pci_enable_msix() interface.

    Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
    ---
    Documentation/PCI/MSI-HOWTO.txt | 13 +++++++++++++
    drivers/pci/msi.c | 5 ++++-
    drivers/pci/pcie/portdrv_core.c | 2 ++
    3 files changed, 19 insertions(+), 1 deletions(-)

    diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
    index a091780..35b2d64 100644
    --- a/Documentation/PCI/MSI-HOWTO.txt
    +++ b/Documentation/PCI/MSI-HOWTO.txt
    @@ -255,6 +255,19 @@ MSI-X Table. This address is mapped by the PCI subsystem, and should not
    be accessed directly by the device driver. If the driver wishes to
    mask or unmask an interrupt, it should call disable_irq() / enable_irq().

    +4.3.4 pci_msix_table_size
    +
    +int pci_msix_table_size(struct pci_dev *dev)
    +
    +This function could be used to retrieve number of entries in the device
    +MSI-X table.
    +
    +If this function returns a negative number, it indicates the device is
    +not capable of sending MSI-Xs.
    +
    +If this function returns a positive number, it indicates the maximum
    +number of MSI-X interrupt vectors that could be allocated.
    +
    4.4 Handling devices implementing both MSI and MSI-X capabilities

    If a device implements both MSI and MSI-X capabilities, it can
    diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
    index b43f391..875c353 100644
    --- a/drivers/pci/msi.c
    +++ b/drivers/pci/msi.c
    @@ -928,11 +928,12 @@ int pci_msix_table_size(struct pci_dev *dev)
    u16 control;

    if (!dev->msix_cap)
    - return 0;
    + return -EINVAL;

    pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
    return msix_table_size(control);
    }
    +EXPORT_SYMBOL(pci_msix_table_size);

    /**
    * pci_enable_msix - configure device's MSI-X capability structure
    @@ -962,6 +963,8 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
    return status;

    nr_entries = pci_msix_table_size(dev);
    + if (nr_entries < 0)
    + return nr_entries;
    if (nvec > nr_entries)
    return nr_entries;

    diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
    index 31063ac..b4d86eb 100644
    --- a/drivers/pci/pcie/portdrv_core.c
    +++ b/drivers/pci/pcie/portdrv_core.c
    @@ -80,6 +80,8 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask)
    u32 reg32;

    nr_entries = pci_msix_table_size(dev);
    + if (nr_entries < 0)
    + return nr_entries;
    if (!nr_entries)
    return -EINVAL;
    if (nr_entries > PCIE_PORT_MAX_MSIX_ENTRIES)
    --
    1.7.7.6


    \
     
     \ /
      Last update: 2013-10-03 01:01    [W:4.393 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site