lkml.org 
[lkml]   [2013]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ARM: at91/tc/clocksource: replace clk_enable/disable with clk_prepare_enable/disable_unprepare
Date
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/clocksource/tcb_clksrc.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 8a61872..0481562 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -100,7 +100,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
- clk_disable(tcd->clk);
+ clk_disable_unprepare(tcd->clk);
}

switch (m) {
@@ -109,7 +109,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
* of oneshot, we get lower overhead and improved accuracy.
*/
case CLOCK_EVT_MODE_PERIODIC:
- clk_enable(tcd->clk);
+ clk_prepare_enable(tcd->clk);

/* slow clock, count up to RC, then irq and restart */
__raw_writel(timer_clock
@@ -126,7 +126,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
break;

case CLOCK_EVT_MODE_ONESHOT:
- clk_enable(tcd->clk);
+ clk_prepare_enable(tcd->clk);

/* slow clock, count up to RC, then irq and stop */
__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
@@ -265,6 +265,7 @@ static int __init tcb_clksrc_init(void)
int best_divisor_idx = -1;
int clk32k_divisor_idx = -1;
int i;
+ int ret;

tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
if (!tc) {
@@ -275,7 +276,11 @@ static int __init tcb_clksrc_init(void)
pdev = tc->pdev;

t0_clk = tc->clk[0];
- clk_enable(t0_clk);
+ ret = clk_prepare_enable(t0_clk);
+ if (ret) {
+ pr_debug("can't enable T0 clk\n");
+ goto err_free_tc;
+ }

/* How fast will we be counting? Pick something over 5 MHz. */
rate = (u32) clk_get_rate(t0_clk);
@@ -313,7 +318,11 @@ static int __init tcb_clksrc_init(void)
/* tclib will give us three clocks no matter what the
* underlying platform supports.
*/
- clk_enable(tc->clk[1]);
+ ret = clk_prepare_enable(tc->clk[1]);
+ if (ret) {
+ pr_debug("can't enable T1 clk\n");
+ goto err_disable_t0;
+ }
/* setup both channel 0 & 1 */
tcb_setup_dual_chan(tc, best_divisor_idx);
}
@@ -325,5 +334,12 @@ static int __init tcb_clksrc_init(void)
setup_clkevents(tc, clk32k_divisor_idx);

return 0;
+
+err_disable_t0:
+ clk_disable_unprepare(t0_clk);
+
+err_free_tc:
+ atmel_tc_free(tc);
+ return ret;
}
arch_initcall(tcb_clksrc_init);
--
1.7.9.5


\
 
 \ /
  Last update: 2013-10-02 15:41    [W:0.088 / U:3.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site