lkml.org 
[lkml]   [2013]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 04/14] intel_mid: Renamed *mrst* to *intel_mid*
Date
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Following files contains code that is common to all intel mid
soc's. So renamed them as below.

mrst/mrst.c -> intel-mid/intel-mid.c
mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c -> pci/intel_mid_pci.c

Also, renamed the corresponding header files and made changes
to the driver files that included these header files.

To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/include/asm/intel-mid.h | 81 ++
arch/x86/include/asm/intel_mid_vrtc.h | 9 +
arch/x86/include/asm/mrst-vrtc.h | 9 -
arch/x86/include/asm/mrst.h | 81 --
arch/x86/kernel/apb_timer.c | 2 +-
arch/x86/kernel/early_printk.c | 2 +-
arch/x86/kernel/rtc.c | 2 +-
arch/x86/pci/Makefile | 2 +-
arch/x86/pci/intel_mid_pci.c | 310 ++++++
arch/x86/pci/mrst.c | 310 ------
arch/x86/platform/Makefile | 2 +-
arch/x86/platform/intel-mid/Makefile | 3 +
.../platform/intel-mid/early_printk_intel_mid.c | 325 ++++++
arch/x86/platform/intel-mid/intel-mid.c | 1055 ++++++++++++++++++++
arch/x86/platform/intel-mid/intel_mid_vrtc.c | 177 ++++
arch/x86/platform/mrst/Makefile | 3 -
arch/x86/platform/mrst/early_printk_mrst.c | 325 ------
arch/x86/platform/mrst/mrst.c | 1054 -------------------
arch/x86/platform/mrst/vrtc.c | 177 ----
drivers/gpu/drm/gma500/mdfld_dsi_output.h | 2 +-
drivers/gpu/drm/gma500/oaktrail_device.c | 2 +-
drivers/gpu/drm/gma500/oaktrail_lvds.c | 2 +-
drivers/platform/x86/intel_scu_ipc.c | 2 +-
drivers/rtc/rtc-mrst.c | 4 +-
drivers/watchdog/intel_scu_watchdog.c | 2 +-
25 files changed, 1972 insertions(+), 1971 deletions(-)
create mode 100644 arch/x86/include/asm/intel-mid.h
create mode 100644 arch/x86/include/asm/intel_mid_vrtc.h
delete mode 100644 arch/x86/include/asm/mrst-vrtc.h
delete mode 100644 arch/x86/include/asm/mrst.h
create mode 100644 arch/x86/pci/intel_mid_pci.c
delete mode 100644 arch/x86/pci/mrst.c
create mode 100644 arch/x86/platform/intel-mid/Makefile
create mode 100644 arch/x86/platform/intel-mid/early_printk_intel_mid.c
create mode 100644 arch/x86/platform/intel-mid/intel-mid.c
create mode 100644 arch/x86/platform/intel-mid/intel_mid_vrtc.c
delete mode 100644 arch/x86/platform/mrst/Makefile
delete mode 100644 arch/x86/platform/mrst/early_printk_mrst.c
delete mode 100644 arch/x86/platform/mrst/mrst.c
delete mode 100644 arch/x86/platform/mrst/vrtc.c

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
new file mode 100644
index 0000000..cc79a4f
--- /dev/null
+++ b/arch/x86/include/asm/intel-mid.h
@@ -0,0 +1,81 @@
+/*
+ * intel-mid.h: Intel MID specific setup code
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _ASM_X86_INTEL_MID_H
+#define _ASM_X86_INTEL_MID_H
+
+#include <linux/sfi.h>
+
+extern int pci_mrst_init(void);
+extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int sfi_mrtc_num;
+extern struct sfi_rtc_table_entry sfi_mrtc_array[];
+
+/*
+ * Medfield is the follow-up of Moorestown, it combines two chip solution into
+ * one. Other than that it also added always-on and constant tsc and lapic
+ * timers. Medfield is the platform name, and the chip name is called Penwell
+ * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
+ * identified via MSRs.
+ */
+enum mrst_cpu_type {
+ /* 1 was Moorestown */
+ MRST_CPU_CHIP_PENWELL = 2,
+};
+
+extern enum mrst_cpu_type __mrst_cpu_chip;
+
+#ifdef CONFIG_X86_INTEL_MID
+
+static inline enum mrst_cpu_type mrst_identify_cpu(void)
+{
+ return __mrst_cpu_chip;
+}
+
+#else /* !CONFIG_X86_INTEL_MID */
+
+#define mrst_identify_cpu() (0)
+
+#endif /* !CONFIG_X86_INTEL_MID */
+
+enum mrst_timer_options {
+ MRST_TIMER_DEFAULT,
+ MRST_TIMER_APBT_ONLY,
+ MRST_TIMER_LAPIC_APBT,
+};
+
+extern enum mrst_timer_options mrst_timer_options;
+
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU 83200
+#define PENWELL_FSB_FREQ_100SKU 99840
+
+#define SFI_MTMR_MAX_NUM 8
+#define SFI_MRTC_MAX 8
+
+extern struct console early_mrst_console;
+extern void mrst_early_console_init(void);
+
+extern struct console early_hsu_console;
+extern void hsu_early_console_init(const char *);
+
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
+/* VRTC timer */
+#define MRST_VRTC_MAP_SZ (1024)
+/*#define MRST_VRTC_PGOFFSET (0xc00) */
+
+extern void mrst_rtc_init(void);
+
+#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/intel_mid_vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h
new file mode 100644
index 0000000..86ff468
--- /dev/null
+++ b/arch/x86/include/asm/intel_mid_vrtc.h
@@ -0,0 +1,9 @@
+#ifndef _INTEL_MID_VRTC_H
+#define _INTEL_MID_VRTC_H
+
+extern unsigned char vrtc_cmos_read(unsigned char reg);
+extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
+extern void vrtc_get_time(struct timespec *now);
+extern int vrtc_set_mmss(const struct timespec *now);
+
+#endif
diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h
deleted file mode 100644
index 1e69a75..0000000
--- a/arch/x86/include/asm/mrst-vrtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _MRST_VRTC_H
-#define _MRST_VRTC_H
-
-extern unsigned char vrtc_cmos_read(unsigned char reg);
-extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
-extern void vrtc_get_time(struct timespec *now);
-extern int vrtc_set_mmss(const struct timespec *now);
-
-#endif
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
deleted file mode 100644
index fc18bf3..0000000
--- a/arch/x86/include/asm/mrst.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * mrst.h: Intel Moorestown platform specific setup code
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-#ifndef _ASM_X86_MRST_H
-#define _ASM_X86_MRST_H
-
-#include <linux/sfi.h>
-
-extern int pci_mrst_init(void);
-extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
-extern int sfi_mrtc_num;
-extern struct sfi_rtc_table_entry sfi_mrtc_array[];
-
-/*
- * Medfield is the follow-up of Moorestown, it combines two chip solution into
- * one. Other than that it also added always-on and constant tsc and lapic
- * timers. Medfield is the platform name, and the chip name is called Penwell
- * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
- * identified via MSRs.
- */
-enum mrst_cpu_type {
- /* 1 was Moorestown */
- MRST_CPU_CHIP_PENWELL = 2,
-};
-
-extern enum mrst_cpu_type __mrst_cpu_chip;
-
-#ifdef CONFIG_X86_INTEL_MID
-
-static inline enum mrst_cpu_type mrst_identify_cpu(void)
-{
- return __mrst_cpu_chip;
-}
-
-#else /* !CONFIG_X86_INTEL_MID */
-
-#define mrst_identify_cpu() (0)
-
-#endif /* !CONFIG_X86_INTEL_MID */
-
-enum mrst_timer_options {
- MRST_TIMER_DEFAULT,
- MRST_TIMER_APBT_ONLY,
- MRST_TIMER_LAPIC_APBT,
-};
-
-extern enum mrst_timer_options mrst_timer_options;
-
-/*
- * Penwell uses spread spectrum clock, so the freq number is not exactly
- * the same as reported by MSR based on SDM.
- */
-#define PENWELL_FSB_FREQ_83SKU 83200
-#define PENWELL_FSB_FREQ_100SKU 99840
-
-#define SFI_MTMR_MAX_NUM 8
-#define SFI_MRTC_MAX 8
-
-extern struct console early_mrst_console;
-extern void mrst_early_console_init(void);
-
-extern struct console early_hsu_console;
-extern void hsu_early_console_init(const char *);
-
-extern void intel_scu_devices_create(void);
-extern void intel_scu_devices_destroy(void);
-
-/* VRTC timer */
-#define MRST_VRTC_MAP_SZ (1024)
-/*#define MRST_VRTC_PGOFFSET (0xc00) */
-
-extern void mrst_rtc_init(void);
-
-#endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index c9876ef..9154836 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -40,7 +40,7 @@

#include <asm/fixmap.h>
#include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/time.h>

#define APBT_CLOCKEVENT_RATING 110
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index d15f575..38ca398 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -14,7 +14,7 @@
#include <xen/hvc-console.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>

diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 0aa2939..a1b52fe 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -12,7 +12,7 @@
#include <asm/vsyscall.h>
#include <asm/x86_init.h>
#include <asm/time.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/rtc.h>

#ifdef CONFIG_X86_32
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index ee0af58..e063eed 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o

-obj-$(CONFIG_X86_INTEL_MID) += mrst.o
+obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o

obj-y += common.o early.o
obj-y += bus_numa.o
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
new file mode 100644
index 0000000..f8715f7
--- /dev/null
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -0,0 +1,310 @@
+/*
+ * Intel MID PCI support
+ * Copyright (c) 2008 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Moorestown has an interesting PCI implementation:
+ * - configuration space is memory mapped (as defined by MCFG)
+ * - Lincroft devices also have a real, type 1 configuration space
+ * - Early Lincroft silicon has a type 1 access bug that will cause
+ * a hang if non-existent devices are accessed
+ * - some devices have the "fixed BAR" capability, which means
+ * they can't be relocated or modified; check for that during
+ * BAR sizing
+ *
+ * So, we use the MCFG space for all reads and writes, but also send
+ * Lincroft writes to type 1 space. But only read/write if the device
+ * actually exists, otherwise return all 1s for reads and bit bucket
+ * the writes.
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+
+#include <asm/segment.h>
+#include <asm/pci_x86.h>
+#include <asm/hw_irq.h>
+#include <asm/io_apic.h>
+
+#define PCIE_CAP_OFFSET 0x100
+
+/* Fixed BAR fields */
+#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
+#define PCI_FIXED_BAR_0_SIZE 0x04
+#define PCI_FIXED_BAR_1_SIZE 0x08
+#define PCI_FIXED_BAR_2_SIZE 0x0c
+#define PCI_FIXED_BAR_3_SIZE 0x10
+#define PCI_FIXED_BAR_4_SIZE 0x14
+#define PCI_FIXED_BAR_5_SIZE 0x1c
+
+static int pci_soc_mode;
+
+/**
+ * fixed_bar_cap - return the offset of the fixed BAR cap if found
+ * @bus: PCI bus
+ * @devfn: device in question
+ *
+ * Look for the fixed BAR cap on @bus and @devfn, returning its offset
+ * if found or 0 otherwise.
+ */
+static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
+{
+ int pos;
+ u32 pcie_cap = 0, cap_data;
+
+ pos = PCIE_CAP_OFFSET;
+
+ if (!raw_pci_ext_ops)
+ return 0;
+
+ while (pos) {
+ if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+ devfn, pos, 4, &pcie_cap))
+ return 0;
+
+ if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+ PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+ break;
+
+ if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
+ raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+ devfn, pos + 4, 4, &cap_data);
+ if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
+ return pos;
+ }
+
+ pos = PCI_EXT_CAP_NEXT(pcie_cap);
+ }
+
+ return 0;
+}
+
+static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
+ int reg, int len, u32 val, int offset)
+{
+ u32 size;
+ unsigned int domain, busnum;
+ int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
+
+ domain = pci_domain_nr(bus);
+ busnum = bus->number;
+
+ if (val == ~0 && len == 4) {
+ unsigned long decode;
+
+ raw_pci_ext_ops->read(domain, busnum, devfn,
+ offset + 8 + (bar * 4), 4, &size);
+
+ /* Turn the size into a decode pattern for the sizing code */
+ if (size) {
+ decode = size - 1;
+ decode |= decode >> 1;
+ decode |= decode >> 2;
+ decode |= decode >> 4;
+ decode |= decode >> 8;
+ decode |= decode >> 16;
+ decode++;
+ decode = ~(decode - 1);
+ } else {
+ decode = 0;
+ }
+
+ /*
+ * If val is all ones, the core code is trying to size the reg,
+ * so update the mmconfig space with the real size.
+ *
+ * Note: this assumes the fixed size we got is a power of two.
+ */
+ return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
+ decode);
+ }
+
+ /* This is some other kind of BAR write, so just do it. */
+ return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
+}
+
+/**
+ * type1_access_ok - check whether to use type 1
+ * @bus: bus number
+ * @devfn: device & function in question
+ *
+ * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
+ * all, the we can go ahead with any reads & writes. If it's on a Lincroft,
+ * but doesn't exist, avoid the access altogether to keep the chip from
+ * hanging.
+ */
+static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
+{
+ /*
+ * This is a workaround for A0 LNC bug where PCI status register does
+ * not have new CAP bit set. can not be written by SW either.
+ *
+ * PCI header type in real LNC indicates a single function device, this
+ * will prevent probing other devices under the same function in PCI
+ * shim. Therefore, use the header type in shim instead.
+ */
+ if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
+ return 0;
+ if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+ || devfn == PCI_DEVFN(0, 0)
+ || devfn == PCI_DEVFN(3, 0)))
+ return 1;
+ return 0; /* Langwell on others */
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ if (type1_access_ok(bus->number, devfn, where))
+ return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
+ devfn, where, size, value);
+ return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+ devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ int offset;
+
+ /*
+ * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+ * to ROM BAR return 0 then being ignored.
+ */
+ if (where == PCI_ROM_ADDRESS)
+ return 0;
+
+ /*
+ * Devices with fixed BARs need special handling:
+ * - BAR sizing code will save, write ~0, read size, restore
+ * - so writes to fixed BARs need special handling
+ * - other writes to fixed BAR devices should go through mmconfig
+ */
+ offset = fixed_bar_cap(bus, devfn);
+ if (offset &&
+ (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
+ return pci_device_update_fixed(bus, devfn, where, size, value,
+ offset);
+ }
+
+ /*
+ * On Moorestown update both real & mmconfig space
+ * Note: early Lincroft silicon can't handle type 1 accesses to
+ * non-existent devices, so just eat the write in that case.
+ */
+ if (type1_access_ok(bus->number, devfn, where))
+ return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
+ devfn, where, size, value);
+ return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
+ where, size, value);
+}
+
+static int mrst_pci_irq_enable(struct pci_dev *dev)
+{
+ u8 pin;
+ struct io_apic_irq_attr irq_attr;
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+ /*
+ * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+ * IOAPIC RTE entries, so we just enable RTE for the device.
+ */
+ irq_attr.ioapic = mp_find_ioapic(dev->irq);
+ irq_attr.ioapic_pin = dev->irq;
+ irq_attr.trigger = 1; /* level */
+ irq_attr.polarity = 1; /* active low */
+ io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
+
+ return 0;
+}
+
+struct pci_ops pci_mrst_ops = {
+ .read = pci_read,
+ .write = pci_write,
+};
+
+/**
+ * pci_mrst_init - installs pci_mrst_ops
+ *
+ * Moorestown has an interesting PCI implementation (see above).
+ * Called when the early platform detection installs it.
+ */
+int __init pci_mrst_init(void)
+{
+ pr_info("Intel MID platform detected, using MID PCI ops\n");
+ pci_mmcfg_late_init();
+ pcibios_enable_irq = mrst_pci_irq_enable;
+ pci_root_ops = pci_mrst_ops;
+ pci_soc_mode = 1;
+ /* Continue with standard init */
+ return 1;
+}
+
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
+ */
+static void pci_d3delay_fixup(struct pci_dev *dev)
+{
+ /*
+ * PCI fixups are effectively decided compile time. If we have a dual
+ * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+ */
+ if (!pci_soc_mode)
+ return;
+ /*
+ * True PCI devices in Lincroft should allow type 1 access, the rest
+ * are Langwell fake PCI devices.
+ */
+ if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
+ return;
+ dev->d3_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
+
+static void mrst_power_off_unused_dev(struct pci_dev *dev)
+{
+ pci_set_power_state(dev, PCI_D3hot);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
+
+/*
+ * Langwell devices reside at fixed offsets, don't try to move them.
+ */
+static void pci_fixed_bar_fixup(struct pci_dev *dev)
+{
+ unsigned long offset;
+ u32 size;
+ int i;
+
+ if (!pci_soc_mode)
+ return;
+
+ /* Must have extended configuration space */
+ if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
+ return;
+
+ /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
+ offset = fixed_bar_cap(dev->bus, dev->devfn);
+ if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
+ PCI_DEVFN(2, 2) == dev->devfn)
+ return;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+ pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
+ dev->resource[i].end = dev->resource[i].start + size - 1;
+ dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
deleted file mode 100644
index 903fded..0000000
--- a/arch/x86/pci/mrst.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Moorestown PCI support
- * Copyright (c) 2008 Intel Corporation
- * Jesse Barnes <jesse.barnes@intel.com>
- *
- * Moorestown has an interesting PCI implementation:
- * - configuration space is memory mapped (as defined by MCFG)
- * - Lincroft devices also have a real, type 1 configuration space
- * - Early Lincroft silicon has a type 1 access bug that will cause
- * a hang if non-existent devices are accessed
- * - some devices have the "fixed BAR" capability, which means
- * they can't be relocated or modified; check for that during
- * BAR sizing
- *
- * So, we use the MCFG space for all reads and writes, but also send
- * Lincroft writes to type 1 space. But only read/write if the device
- * actually exists, otherwise return all 1s for reads and bit bucket
- * the writes.
- */
-
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/smp.h>
-
-#include <asm/segment.h>
-#include <asm/pci_x86.h>
-#include <asm/hw_irq.h>
-#include <asm/io_apic.h>
-
-#define PCIE_CAP_OFFSET 0x100
-
-/* Fixed BAR fields */
-#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
-#define PCI_FIXED_BAR_0_SIZE 0x04
-#define PCI_FIXED_BAR_1_SIZE 0x08
-#define PCI_FIXED_BAR_2_SIZE 0x0c
-#define PCI_FIXED_BAR_3_SIZE 0x10
-#define PCI_FIXED_BAR_4_SIZE 0x14
-#define PCI_FIXED_BAR_5_SIZE 0x1c
-
-static int pci_soc_mode;
-
-/**
- * fixed_bar_cap - return the offset of the fixed BAR cap if found
- * @bus: PCI bus
- * @devfn: device in question
- *
- * Look for the fixed BAR cap on @bus and @devfn, returning its offset
- * if found or 0 otherwise.
- */
-static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
-{
- int pos;
- u32 pcie_cap = 0, cap_data;
-
- pos = PCIE_CAP_OFFSET;
-
- if (!raw_pci_ext_ops)
- return 0;
-
- while (pos) {
- if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
- devfn, pos, 4, &pcie_cap))
- return 0;
-
- if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
- PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
- break;
-
- if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
- raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
- devfn, pos + 4, 4, &cap_data);
- if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
- return pos;
- }
-
- pos = PCI_EXT_CAP_NEXT(pcie_cap);
- }
-
- return 0;
-}
-
-static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
- int reg, int len, u32 val, int offset)
-{
- u32 size;
- unsigned int domain, busnum;
- int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
-
- domain = pci_domain_nr(bus);
- busnum = bus->number;
-
- if (val == ~0 && len == 4) {
- unsigned long decode;
-
- raw_pci_ext_ops->read(domain, busnum, devfn,
- offset + 8 + (bar * 4), 4, &size);
-
- /* Turn the size into a decode pattern for the sizing code */
- if (size) {
- decode = size - 1;
- decode |= decode >> 1;
- decode |= decode >> 2;
- decode |= decode >> 4;
- decode |= decode >> 8;
- decode |= decode >> 16;
- decode++;
- decode = ~(decode - 1);
- } else {
- decode = 0;
- }
-
- /*
- * If val is all ones, the core code is trying to size the reg,
- * so update the mmconfig space with the real size.
- *
- * Note: this assumes the fixed size we got is a power of two.
- */
- return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
- decode);
- }
-
- /* This is some other kind of BAR write, so just do it. */
- return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
-}
-
-/**
- * type1_access_ok - check whether to use type 1
- * @bus: bus number
- * @devfn: device & function in question
- *
- * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
- * all, the we can go ahead with any reads & writes. If it's on a Lincroft,
- * but doesn't exist, avoid the access altogether to keep the chip from
- * hanging.
- */
-static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
-{
- /*
- * This is a workaround for A0 LNC bug where PCI status register does
- * not have new CAP bit set. can not be written by SW either.
- *
- * PCI header type in real LNC indicates a single function device, this
- * will prevent probing other devices under the same function in PCI
- * shim. Therefore, use the header type in shim instead.
- */
- if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
- return 0;
- if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
- || devfn == PCI_DEVFN(0, 0)
- || devfn == PCI_DEVFN(3, 0)))
- return 1;
- return 0; /* Langwell on others */
-}
-
-static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- if (type1_access_ok(bus->number, devfn, where))
- return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
- devfn, where, size, value);
- return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
- devfn, where, size, value);
-}
-
-static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- int offset;
-
- /*
- * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
- * to ROM BAR return 0 then being ignored.
- */
- if (where == PCI_ROM_ADDRESS)
- return 0;
-
- /*
- * Devices with fixed BARs need special handling:
- * - BAR sizing code will save, write ~0, read size, restore
- * - so writes to fixed BARs need special handling
- * - other writes to fixed BAR devices should go through mmconfig
- */
- offset = fixed_bar_cap(bus, devfn);
- if (offset &&
- (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
- return pci_device_update_fixed(bus, devfn, where, size, value,
- offset);
- }
-
- /*
- * On Moorestown update both real & mmconfig space
- * Note: early Lincroft silicon can't handle type 1 accesses to
- * non-existent devices, so just eat the write in that case.
- */
- if (type1_access_ok(bus->number, devfn, where))
- return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
- devfn, where, size, value);
- return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
- where, size, value);
-}
-
-static int mrst_pci_irq_enable(struct pci_dev *dev)
-{
- u8 pin;
- struct io_apic_irq_attr irq_attr;
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-
- /*
- * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
- * IOAPIC RTE entries, so we just enable RTE for the device.
- */
- irq_attr.ioapic = mp_find_ioapic(dev->irq);
- irq_attr.ioapic_pin = dev->irq;
- irq_attr.trigger = 1; /* level */
- irq_attr.polarity = 1; /* active low */
- io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
-
- return 0;
-}
-
-struct pci_ops pci_mrst_ops = {
- .read = pci_read,
- .write = pci_write,
-};
-
-/**
- * pci_mrst_init - installs pci_mrst_ops
- *
- * Moorestown has an interesting PCI implementation (see above).
- * Called when the early platform detection installs it.
- */
-int __init pci_mrst_init(void)
-{
- pr_info("Intel MID platform detected, using MID PCI ops\n");
- pci_mmcfg_late_init();
- pcibios_enable_irq = mrst_pci_irq_enable;
- pci_root_ops = pci_mrst_ops;
- pci_soc_mode = 1;
- /* Continue with standard init */
- return 1;
-}
-
-/*
- * Langwell devices are not true PCI devices; they are not subject to 10 ms
- * d3 to d0 delay required by PCI spec.
- */
-static void pci_d3delay_fixup(struct pci_dev *dev)
-{
- /*
- * PCI fixups are effectively decided compile time. If we have a dual
- * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
- */
- if (!pci_soc_mode)
- return;
- /*
- * True PCI devices in Lincroft should allow type 1 access, the rest
- * are Langwell fake PCI devices.
- */
- if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
- return;
- dev->d3_delay = 0;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
-
-static void mrst_power_off_unused_dev(struct pci_dev *dev)
-{
- pci_set_power_state(dev, PCI_D3hot);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
-
-/*
- * Langwell devices reside at fixed offsets, don't try to move them.
- */
-static void pci_fixed_bar_fixup(struct pci_dev *dev)
-{
- unsigned long offset;
- u32 size;
- int i;
-
- if (!pci_soc_mode)
- return;
-
- /* Must have extended configuration space */
- if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
- return;
-
- /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
- offset = fixed_bar_cap(dev->bus, dev->devfn);
- if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
- PCI_DEVFN(2, 2) == dev->devfn)
- return;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
- dev->resource[i].end = dev->resource[i].start + size - 1;
- dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 01e0231..20342d4 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -4,7 +4,7 @@ obj-y += efi/
obj-y += geode/
obj-y += goldfish/
obj-y += iris/
-obj-y += mrst/
+obj-y += intel-mid/
obj-y += olpc/
obj-y += scx200/
obj-y += sfi/
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
new file mode 100644
index 0000000..de29635
--- /dev/null
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
+obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
new file mode 100644
index 0000000..7c56e70
--- /dev/null
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -0,0 +1,325 @@
+/*
+ * early_printk_intel_mid.c - early consoles for Intel MID platforms
+ *
+ * Copyright (c) 2008-2010, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/*
+ * This file implements two early consoles named mrst and hsu.
+ * mrst is based on Maxim3110 spi-uart device, it exists in both
+ * Moorestown and Medfield platforms, while hsu is based on a High
+ * Speed UART device which only exists in the Medfield platform
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/serial_mfd.h>
+#include <linux/kmsg_dump.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/intel-mid.h>
+
+#define MRST_SPI_TIMEOUT 0x200000
+#define MRST_REGBASE_SPI0 0xff128000
+#define MRST_REGBASE_SPI1 0xff128400
+#define MRST_CLK_SPI0_REG 0xff11d86c
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET 0
+
+#define SPI_FRF_OFFSET 4
+#define SPI_FRF_SPI 0x0
+#define SPI_FRF_SSP 0x1
+#define SPI_FRF_MICROWIRE 0x2
+#define SPI_FRF_RESV 0x3
+
+#define SPI_MODE_OFFSET 6
+#define SPI_SCPH_OFFSET 6
+#define SPI_SCOL_OFFSET 7
+#define SPI_TMOD_OFFSET 8
+#define SPI_TMOD_TR 0x0 /* xmit & recv */
+#define SPI_TMOD_TO 0x1 /* xmit only */
+#define SPI_TMOD_RO 0x2 /* recv only */
+#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET 10
+#define SPI_SRL_OFFSET 11
+#define SPI_CFS_OFFSET 12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK 0x7f /* cover 7 bits */
+#define SR_BUSY (1 << 0)
+#define SR_TF_NOT_FULL (1 << 1)
+#define SR_TF_EMPT (1 << 2)
+#define SR_RF_NOT_EMPT (1 << 3)
+#define SR_RF_FULL (1 << 4)
+#define SR_TX_ERR (1 << 5)
+#define SR_DCOL (1 << 6)
+
+struct dw_spi_reg {
+ u32 ctrl0;
+ u32 ctrl1;
+ u32 ssienr;
+ u32 mwcr;
+ u32 ser;
+ u32 baudr;
+ u32 txfltr;
+ u32 rxfltr;
+ u32 txflr;
+ u32 rxflr;
+ u32 sr;
+ u32 imr;
+ u32 isr;
+ u32 risr;
+ u32 txoicr;
+ u32 rxoicr;
+ u32 rxuicr;
+ u32 msticr;
+ u32 icr;
+ u32 dmacr;
+ u32 dmatdlr;
+ u32 dmardlr;
+ u32 idr;
+ u32 version;
+
+ /* Currently operates as 32 bits, though only the low 16 bits matter */
+ u32 dr;
+} __packed;
+
+#define dw_readl(dw, name) __raw_readl(&(dw)->name)
+#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name)
+
+/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
+static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
+
+static u32 *pclk_spi0;
+/* Always contains an accessible address, start with 0 */
+static struct dw_spi_reg *pspi;
+
+static struct kmsg_dumper dw_dumper;
+static int dumper_registered;
+
+static void dw_kmsg_dump(struct kmsg_dumper *dumper,
+ enum kmsg_dump_reason reason)
+{
+ static char line[1024];
+ size_t len;
+
+ /* When run to this, we'd better re-init the HW */
+ mrst_early_console_init();
+
+ while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+ early_mrst_console.write(&early_mrst_console, line, len);
+}
+
+/* Set the ratio rate to 115200, 8n1, IRQ disabled */
+static void max3110_write_config(void)
+{
+ u16 config;
+
+ config = 0xc001;
+ dw_writel(pspi, dr, config);
+}
+
+/* Translate char to a eligible word and send to max3110 */
+static void max3110_write_data(char c)
+{
+ u16 data;
+
+ data = 0x8000 | c;
+ dw_writel(pspi, dr, data);
+}
+
+void mrst_early_console_init(void)
+{
+ u32 ctrlr0 = 0;
+ u32 spi0_cdiv;
+ u32 freq; /* Freqency info only need be searched once */
+
+ /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
+ pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+ MRST_CLK_SPI0_REG);
+ spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
+ freq = 100000000 / (spi0_cdiv + 1);
+
+ if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+ mrst_spi_paddr = MRST_REGBASE_SPI1;
+
+ pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+ mrst_spi_paddr);
+
+ /* Disable SPI controller */
+ dw_writel(pspi, ssienr, 0);
+
+ /* Set control param, 8 bits, transmit only mode */
+ ctrlr0 = dw_readl(pspi, ctrl0);
+
+ ctrlr0 &= 0xfcc0;
+ ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
+ | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
+ dw_writel(pspi, ctrl0, ctrlr0);
+
+ /*
+ * Change the spi0 clk to comply with 115200 bps, use 100000 to
+ * calculate the clk dividor to make the clock a little slower
+ * than real baud rate.
+ */
+ dw_writel(pspi, baudr, freq/100000);
+
+ /* Disable all INT for early phase */
+ dw_writel(pspi, imr, 0x0);
+
+ /* Set the cs to spi-uart */
+ dw_writel(pspi, ser, 0x2);
+
+ /* Enable the HW, the last step for HW init */
+ dw_writel(pspi, ssienr, 0x1);
+
+ /* Set the default configuration */
+ max3110_write_config();
+
+ /* Register the kmsg dumper */
+ if (!dumper_registered) {
+ dw_dumper.dump = dw_kmsg_dump;
+ kmsg_dump_register(&dw_dumper);
+ dumper_registered = 1;
+ }
+}
+
+/* Slave select should be called in the read/write function */
+static void early_mrst_spi_putc(char c)
+{
+ unsigned int timeout;
+ u32 sr;
+
+ timeout = MRST_SPI_TIMEOUT;
+ /* Early putc needs to make sure the TX FIFO is not full */
+ while (--timeout) {
+ sr = dw_readl(pspi, sr);
+ if (!(sr & SR_TF_NOT_FULL))
+ cpu_relax();
+ else
+ break;
+ }
+
+ if (!timeout)
+ pr_warn("MRST earlycon: timed out\n");
+ else
+ max3110_write_data(c);
+}
+
+/* Early SPI only uses polling mode */
+static void early_mrst_spi_write(struct console *con, const char *str,
+ unsigned n)
+{
+ int i;
+
+ for (i = 0; i < n && *str; i++) {
+ if (*str == '\n')
+ early_mrst_spi_putc('\r');
+ early_mrst_spi_putc(*str);
+ str++;
+ }
+}
+
+struct console early_mrst_console = {
+ .name = "earlymrst",
+ .write = early_mrst_spi_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/*
+ * Following is the early console based on Medfield HSU (High
+ * Speed UART) device.
+ */
+#define HSU_PORT_BASE 0xffa28080
+
+static void __iomem *phsu;
+
+void hsu_early_console_init(const char *s)
+{
+ unsigned long paddr, port = 0;
+ u8 lcr;
+
+ /*
+ * Select the early HSU console port if specified by user in the
+ * kernel command line.
+ */
+ if (*s && !kstrtoul(s, 10, &port))
+ port = clamp_val(port, 0, 2);
+
+ paddr = HSU_PORT_BASE + port * 0x80;
+ phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
+
+ /* Disable FIFO */
+ writeb(0x0, phsu + UART_FCR);
+
+ /* Set to default 115200 bps, 8n1 */
+ lcr = readb(phsu + UART_LCR);
+ writeb((0x80 | lcr), phsu + UART_LCR);
+ writeb(0x18, phsu + UART_DLL);
+ writeb(lcr, phsu + UART_LCR);
+ writel(0x3600, phsu + UART_MUL*4);
+
+ writeb(0x8, phsu + UART_MCR);
+ writeb(0x7, phsu + UART_FCR);
+ writeb(0x3, phsu + UART_LCR);
+
+ /* Clear IRQ status */
+ readb(phsu + UART_LSR);
+ readb(phsu + UART_RX);
+ readb(phsu + UART_IIR);
+ readb(phsu + UART_MSR);
+
+ /* Enable FIFO */
+ writeb(0x7, phsu + UART_FCR);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void early_hsu_putc(char ch)
+{
+ unsigned int timeout = 10000; /* 10ms */
+ u8 status;
+
+ while (--timeout) {
+ status = readb(phsu + UART_LSR);
+ if (status & BOTH_EMPTY)
+ break;
+ udelay(1);
+ }
+
+ /* Only write the char when there was no timeout */
+ if (timeout)
+ writeb(ch, phsu + UART_TX);
+}
+
+static void early_hsu_write(struct console *con, const char *str, unsigned n)
+{
+ int i;
+
+ for (i = 0; i < n && *str; i++) {
+ if (*str == '\n')
+ early_hsu_putc('\r');
+ early_hsu_putc(*str);
+ str++;
+ }
+}
+
+struct console early_hsu_console = {
+ .name = "earlyhsu",
+ .write = early_hsu_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
new file mode 100644
index 0000000..0f39c4b
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -0,0 +1,1055 @@
+/*
+ * intel-mid.c: Intel MID platform setup code
+ *
+ * (C) Copyright 2008, 2012 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#define pr_fmt(fmt) "mrst: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/gpio.h>
+#include <linux/i2c/tc35876x.h>
+
+#include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/reboot.h>
+
+/*
+ * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
+ * cmdline option x86_mrst_timer can be used to override the configuration
+ * to prefer one or the other.
+ * at runtime, there are basically three timer configurations:
+ * 1. per cpu apbt clock only
+ * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
+ * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
+ *
+ * by default (without cmdline option), platform code first detects cpu type
+ * to see if we are on lincroft or penwell, then set up both lapic or apbt
+ * clocks accordingly.
+ * i.e. by default, medfield uses configuration #2, moorestown uses #1.
+ * config #3 is supported but not recommended on medfield.
+ *
+ * rating and feature summary:
+ * lapic (with C3STOP) --------- 100
+ * apbt (always-on) ------------ 110
+ * lapic (always-on,ARAT) ------ 150
+ */
+
+enum mrst_timer_options mrst_timer_options;
+
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+enum mrst_cpu_type __mrst_cpu_chip;
+EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
+
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+int sfi_mrtc_num;
+
+static void mrst_power_off(void)
+{
+}
+
+static void mrst_reboot(void)
+{
+ intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+}
+
+/* parse all the mtimer info to a static mtimer array */
+static int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_timer_table_entry *pentry;
+ struct mpc_intsrc mp_irq;
+ int totallen;
+
+ sb = (struct sfi_table_simple *)table;
+ if (!sfi_mtimer_num) {
+ sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+ struct sfi_timer_table_entry);
+ pentry = (struct sfi_timer_table_entry *) sb->pentry;
+ totallen = sfi_mtimer_num * sizeof(*pentry);
+ memcpy(sfi_mtimer_array, pentry, totallen);
+ }
+
+ pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
+ pentry = sfi_mtimer_array;
+ for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+ pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
+ " irq = %d\n", totallen, (u32)pentry->phys_addr,
+ pentry->freq_hz, pentry->irq);
+ if (!pentry->irq)
+ continue;
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+ mp_irq.irqflag = 5;
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ }
+
+ return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+ int i;
+ if (hint < sfi_mtimer_num) {
+ if (!sfi_mtimer_usage[hint]) {
+ pr_debug("hint taken for timer %d irq %d\n",
+ hint, sfi_mtimer_array[hint].irq);
+ sfi_mtimer_usage[hint] = 1;
+ return &sfi_mtimer_array[hint];
+ }
+ }
+ /* take the first timer available */
+ for (i = 0; i < sfi_mtimer_num;) {
+ if (!sfi_mtimer_usage[i]) {
+ sfi_mtimer_usage[i] = 1;
+ return &sfi_mtimer_array[i];
+ }
+ i++;
+ }
+ return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+ int i;
+ for (i = 0; i < sfi_mtimer_num;) {
+ if (mtmr->irq == sfi_mtimer_array[i].irq) {
+ sfi_mtimer_usage[i] = 0;
+ return;
+ }
+ i++;
+ }
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_rtc_table_entry *pentry;
+ struct mpc_intsrc mp_irq;
+
+ int totallen;
+
+ sb = (struct sfi_table_simple *)table;
+ if (!sfi_mrtc_num) {
+ sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+ struct sfi_rtc_table_entry);
+ pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+ totallen = sfi_mrtc_num * sizeof(*pentry);
+ memcpy(sfi_mrtc_array, pentry, totallen);
+ }
+
+ pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
+ pentry = sfi_mrtc_array;
+ for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+ pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
+ totallen, (u32)pentry->phys_addr, pentry->irq);
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = 0xf; /* level trigger and active low */
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ }
+ return 0;
+}
+
+static unsigned long __init mrst_calibrate_tsc(void)
+{
+ unsigned long fast_calibrate;
+ u32 lo, hi, ratio, fsb;
+
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+ ratio = (hi >> 8) & 0x1f;
+ pr_debug("ratio is %d\n", ratio);
+ if (!ratio) {
+ pr_err("read a zero ratio, should be incorrect!\n");
+ pr_err("force tsc ratio to 16 ...\n");
+ ratio = 16;
+ }
+ rdmsr(MSR_FSB_FREQ, lo, hi);
+ if ((lo & 0x7) == 0x7)
+ fsb = PENWELL_FSB_FREQ_83SKU;
+ else
+ fsb = PENWELL_FSB_FREQ_100SKU;
+ fast_calibrate = ratio * fsb;
+ pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+ lapic_timer_frequency = fsb * 1000 / HZ;
+ /* mark tsc clocksource as reliable */
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+
+ if (fast_calibrate)
+ return fast_calibrate;
+
+ return 0;
+}
+
+static void __init mrst_time_init(void)
+{
+ sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
+ switch (mrst_timer_options) {
+ case MRST_TIMER_APBT_ONLY:
+ break;
+ case MRST_TIMER_LAPIC_APBT:
+ x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+ x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+ break;
+ default:
+ if (!boot_cpu_has(X86_FEATURE_ARAT))
+ break;
+ x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+ x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+ return;
+ }
+ /* we need at least one APB timer */
+ pre_init_apic_IRQ0();
+ apbt_time_init();
+}
+
+static void mrst_arch_setup(void)
+{
+ if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
+ __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+ else {
+ pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
+ boot_cpu_data.x86, boot_cpu_data.x86_model);
+ __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+ }
+}
+
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+ return 0;
+}
+
+/*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+ return 0;
+}
+
+/*
+ * Moorestown specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_mrst_early_setup(void)
+{
+ x86_init.resources.probe_roms = x86_init_noop;
+ x86_init.resources.reserve_resources = x86_init_noop;
+
+ x86_init.timers.timer_init = mrst_time_init;
+ x86_init.timers.setup_percpu_clockev = x86_init_noop;
+
+ x86_init.irqs.pre_vector_init = x86_init_noop;
+
+ x86_init.oem.arch_setup = mrst_arch_setup;
+
+ x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
+
+ x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+ x86_platform.i8042_detect = mrst_i8042_detect;
+ x86_init.timers.wallclock_init = mrst_rtc_init;
+ x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
+ x86_init.pci.init = pci_mrst_init;
+ x86_init.pci.fixup_irqs = x86_init_noop;
+
+ legacy_pic = &null_legacy_pic;
+
+ /* Moorestown specific power_off/restart method */
+ pm_power_off = mrst_power_off;
+ machine_ops.emergency_restart = mrst_reboot;
+
+ /* Avoid searching for BIOS MP tables */
+ x86_init.mpparse.find_smp_config = x86_init_noop;
+ x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+ set_bit(MP_BUS_ISA, mp_bus_not_pci);
+}
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ if (strcmp("apbt_only", arg) == 0)
+ mrst_timer_options = MRST_TIMER_APBT_ONLY;
+ else if (strcmp("lapic_and_apbt", arg) == 0)
+ mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+ else {
+ pr_warn("X86 MRST timer option %s not recognised"
+ " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+ arg);
+ return -EINVAL;
+ }
+ return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static struct sfi_gpio_table_entry *gpio_table;
+static int gpio_num_entry;
+
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_gpio_table_entry *pentry;
+ int num, i;
+
+ if (gpio_table)
+ return 0;
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+ pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+ gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+ if (!gpio_table)
+ return -1;
+ memcpy(gpio_table, pentry, num * sizeof(*pentry));
+ gpio_num_entry = num;
+
+ pr_debug("GPIO pin info:\n");
+ for (i = 0; i < num; i++, pentry++)
+ pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+ " pin = %d\n", i,
+ pentry->controller_name,
+ pentry->pin_name,
+ pentry->pin_no);
+ return 0;
+}
+
+static int get_gpio_by_name(const char *name)
+{
+ struct sfi_gpio_table_entry *pentry = gpio_table;
+ int i;
+
+ if (!pentry)
+ return -1;
+ for (i = 0; i < gpio_num_entry; i++, pentry++) {
+ if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+ return pentry->pin_no;
+ }
+ return -1;
+}
+
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+ char name[SFI_NAME_LEN + 1];
+ u8 type;
+ u8 delay;
+ void *(*get_platform_data)(void *info);
+};
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MRST_IRQ_OFFSET 0x100
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+ static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+ int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+ if (gpio_base == -1)
+ gpio_base = 64;
+ pmic_gpio_pdata.gpio_base = gpio_base;
+ pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+ return &pmic_gpio_pdata;
+}
+
+static void __init *max3111_platform_data(void *info)
+{
+ struct spi_board_info *spi_info = info;
+ int intr = get_gpio_by_name("max3111_int");
+
+ spi_info->mode = SPI_MODE_0;
+ if (intr == -1)
+ return NULL;
+ spi_info->irq = intr + MRST_IRQ_OFFSET;
+ return NULL;
+}
+
+/* we have multiple max7315 on the board ... */
+#define MAX7315_NUM 2
+static void __init *max7315_platform_data(void *info)
+{
+ static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+ static int nr;
+ struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ if (nr == MAX7315_NUM) {
+ pr_err("too many max7315s, we only support %d\n",
+ MAX7315_NUM);
+ return NULL;
+ }
+ /* we have several max7315 on the board, we only need load several
+ * instances of the same pca953x driver to cover them
+ */
+ strcpy(i2c_info->type, "max7315");
+ if (nr++) {
+ sprintf(base_pin_name, "max7315_%d_base", nr);
+ sprintf(intr_pin_name, "max7315_%d_int", nr);
+ } else {
+ strcpy(base_pin_name, "max7315_base");
+ strcpy(intr_pin_name, "max7315_int");
+ }
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ max7315->gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ max7315->irq_base = -1;
+ }
+ return max7315;
+}
+
+static void *tca6416_platform_data(void *info)
+{
+ static struct pca953x_platform_data tca6416;
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ strcpy(i2c_info->type, "tca6416");
+ strcpy(base_pin_name, "tca6416_base");
+ strcpy(intr_pin_name, "tca6416_int");
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ tca6416.gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ tca6416.irq_base = -1;
+ }
+ return &tca6416;
+}
+
+static void *mpu3050_platform_data(void *info)
+{
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("mpu3050_int");
+
+ if (intr == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ return NULL;
+}
+
+static void __init *emc1403_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("thermal_int");
+ int intr2nd = get_gpio_by_name("thermal_alert");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static void __init *lis331dl_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("accel_int");
+ int intr2nd = get_gpio_by_name("accel_2");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static void __init *no_platform_data(void *info)
+{
+ return NULL;
+}
+
+static struct resource msic_resources[] = {
+ {
+ .start = INTEL_MSIC_IRQ_PHYS_BASE,
+ .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+ .name = "intel_msic",
+ .id = -1,
+ .dev = {
+ .platform_data = &msic_pdata,
+ },
+ .num_resources = ARRAY_SIZE(msic_resources),
+ .resource = msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+ return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+ unsigned long code, void *data)
+{
+ if (code == SCU_DOWN) {
+ platform_device_unregister(&msic_device);
+ return 0;
+ }
+
+ return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+ static struct notifier_block msic_scu_notifier = {
+ .notifier_call = msic_scu_status_change,
+ };
+
+ /*
+ * We need to be sure that the SCU IPC is ready before MSIC device
+ * can be registered.
+ */
+ if (mrst_has_msic())
+ intel_scu_notifier_add(&msic_scu_notifier);
+
+ return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+ struct sfi_device_table_entry *entry = info;
+
+ BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+ msic_pdata.irq[block] = entry->irq;
+
+ return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+ static struct intel_msic_gpio_pdata pdata;
+ int gpio = get_gpio_by_name("msic_gpio_base");
+
+ if (gpio < 0)
+ return NULL;
+
+ pdata.gpio_base = gpio;
+ msic_pdata.gpio = &pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ pr_err("failed to create audio platform device\n");
+ return NULL;
+ }
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+ static struct intel_msic_ocd_pdata pdata;
+ int gpio = get_gpio_by_name("ocd_gpio");
+
+ if (gpio < 0)
+ return NULL;
+
+ pdata.gpio = gpio;
+ msic_pdata.ocd = &pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
+static void *msic_thermal_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
+}
+
+/* tc35876x DSI-LVDS bridge chip and panel platform data */
+static void *tc35876x_platform_data(void *data)
+{
+ static struct tc35876x_platform_data pdata;
+
+ /* gpio pins set to -1 will not be used by the driver */
+ pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+ pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+ pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+
+ return &pdata;
+}
+
+static const struct devs_id __initconst device_ids[] = {
+ {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
+ {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+ {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
+ {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
+ {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
+ {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
+ {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
+ {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+ {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
+ {"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
+
+ /* MSIC subdevices */
+ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+ {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+ {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+ {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+ {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
+
+ {},
+};
+
+#define MAX_IPCDEVS 24
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static int ipc_next_dev;
+
+#define MAX_SCU_SPI 24
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static int spi_next_dev;
+
+#define MAX_SCU_I2C 24
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static int i2c_bus[MAX_SCU_I2C];
+static int i2c_next_dev;
+
+static void __init intel_scu_device_register(struct platform_device *pdev)
+{
+ if (ipc_next_dev == MAX_IPCDEVS)
+ pr_err("too many SCU IPC devices");
+ else
+ ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+ struct spi_board_info *new_dev;
+
+ if (spi_next_dev == MAX_SCU_SPI) {
+ pr_err("too many SCU SPI devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed spi dev %s\n",
+ sdev->modalias);
+ return;
+ }
+ memcpy(new_dev, sdev, sizeof(*sdev));
+
+ spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+ struct i2c_board_info *idev)
+{
+ struct i2c_board_info *new_dev;
+
+ if (i2c_next_dev == MAX_SCU_I2C) {
+ pr_err("too many SCU I2C devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed i2c dev %s\n",
+ idev->type);
+ return;
+ }
+ memcpy(new_dev, idev, sizeof(*idev));
+
+ i2c_bus[i2c_next_dev] = bus;
+ i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_add(ipc_devs[i]);
+
+ for (i = 0; i < spi_next_dev; i++)
+ spi_register_board_info(spi_devs[i], 1);
+
+ for (i = 0; i < i2c_next_dev; i++) {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ adapter = i2c_get_adapter(i2c_bus[i]);
+ if (adapter) {
+ client = i2c_new_device(adapter, i2c_devs[i]);
+ if (!client)
+ pr_err("can't create i2c device %s\n",
+ i2c_devs[i]->type);
+ } else
+ i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+ }
+ intel_scu_notifier_post(SCU_AVAILABLE, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+ int i;
+
+ intel_scu_notifier_post(SCU_DOWN, NULL);
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+ /* Single threaded */
+ static struct resource __initdata res = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+ res.start = irq;
+ platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
+{
+ const struct devs_id *dev = device_ids;
+ struct platform_device *pdev;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_IPC &&
+ !strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(entry);
+ break;
+ }
+ dev++;
+ }
+
+ /*
+ * On Medfield the platform device creation is handled by the MSIC
+ * MFD driver so we don't need to do it here.
+ */
+ if (mrst_has_msic())
+ return;
+
+ pdev = platform_device_alloc(entry->name, 0);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ entry->name);
+ return;
+ }
+ install_irq_resource(pdev, entry->irq);
+
+ pdev->dev.platform_data = pdata;
+ intel_scu_device_register(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_SPI &&
+ !strncmp(dev->name, spi_info->modalias,
+ SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(spi_info);
+ break;
+ }
+ dev++;
+ }
+ spi_info->platform_data = pdata;
+ if (dev->delay)
+ intel_scu_spi_device_register(spi_info);
+ else
+ spi_register_board_info(spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_I2C &&
+ !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(i2c_info);
+ break;
+ }
+ dev++;
+ }
+ i2c_info->platform_data = pdata;
+
+ if (dev->delay)
+ intel_scu_i2c_device_register(bus, i2c_info);
+ else
+ i2c_register_board_info(bus, i2c_info, 1);
+}
+
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_device_table_entry *pentry;
+ struct spi_board_info spi_info;
+ struct i2c_board_info i2c_info;
+ int num, i, bus;
+ int ioapic;
+ struct io_apic_irq_attr irq_attr;
+
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+ pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+ for (i = 0; i < num; i++, pentry++) {
+ int irq = pentry->irq;
+
+ if (irq != (u8)0xff) { /* native RTE case */
+ /* these SPI2 devices are not exposed to system as PCI
+ * devices, but they have separate RTE entry in IOAPIC
+ * so we have to enable them one by one here
+ */
+ ioapic = mp_find_ioapic(irq);
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = irq;
+ irq_attr.trigger = 1;
+ irq_attr.polarity = 1;
+ io_apic_set_pci_routing(NULL, irq, &irq_attr);
+ } else
+ irq = 0; /* No irq */
+
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ pr_debug("info[%2d]: IPC bus, name = %16.16s, "
+ "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ sfi_handle_ipc_dev(pentry);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ memset(&spi_info, 0, sizeof(spi_info));
+ strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+ spi_info.irq = irq;
+ spi_info.bus_num = pentry->host_num;
+ spi_info.chip_select = pentry->addr;
+ spi_info.max_speed_hz = pentry->max_freq;
+ pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
+ "irq = 0x%2x, max_freq = %d, cs = %d\n", i,
+ spi_info.bus_num,
+ spi_info.modalias,
+ spi_info.irq,
+ spi_info.max_speed_hz,
+ spi_info.chip_select);
+ sfi_handle_spi_dev(&spi_info);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ memset(&i2c_info, 0, sizeof(i2c_info));
+ bus = pentry->host_num;
+ strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+ i2c_info.irq = irq;
+ i2c_info.addr = pentry->addr;
+ pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
+ "irq = 0x%2x, addr = 0x%x\n", i, bus,
+ i2c_info.type,
+ i2c_info.irq,
+ i2c_info.addr);
+ sfi_handle_i2c_dev(bus, &i2c_info);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+static int __init mrst_platform_init(void)
+{
+ sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+ sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+ return 0;
+}
+arch_initcall(mrst_platform_init);
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+ {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
+ {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
+ {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
+ {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
+ {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
+ {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
+ {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
+ {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
+};
+
+static struct gpio_keys_platform_data mrst_gpio_keys = {
+ .buttons = gpio_button,
+ .rep = 1,
+ .nbuttons = -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mrst_gpio_keys,
+ },
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+ struct gpio_keys_button *gb = gpio_button;
+ int i, num, good = 0;
+
+ num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+ for (i = 0; i < num; i++) {
+ gb[i].gpio = get_gpio_by_name(gb[i].desc);
+ pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+ gb[i].gpio);
+ if (gb[i].gpio == -1)
+ continue;
+
+ if (i != good)
+ gb[good] = gb[i];
+ good++;
+ }
+
+ if (good) {
+ mrst_gpio_keys.nbuttons = good;
+ return platform_device_register(&pb_device);
+ }
+ return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
new file mode 100644
index 0000000..ded9fbd
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -0,0 +1,177 @@
+/*
+ * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based on RTC CMOS driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/time.h>
+#include <asm/fixmap.h>
+
+static unsigned char __iomem *vrtc_virt_base;
+
+unsigned char vrtc_cmos_read(unsigned char reg)
+{
+ unsigned char retval;
+
+ /* vRTC's registers range from 0x0 to 0xD */
+ if (reg > 0xd || !vrtc_virt_base)
+ return 0xff;
+
+ lock_cmos_prefix(reg);
+ retval = __raw_readb(vrtc_virt_base + (reg << 2));
+ lock_cmos_suffix(reg);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_read);
+
+void vrtc_cmos_write(unsigned char val, unsigned char reg)
+{
+ if (reg > 0xd || !vrtc_virt_base)
+ return;
+
+ lock_cmos_prefix(reg);
+ __raw_writeb(val, vrtc_virt_base + (reg << 2));
+ lock_cmos_suffix(reg);
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_write);
+
+void vrtc_get_time(struct timespec *now)
+{
+ u8 sec, min, hour, mday, mon;
+ unsigned long flags;
+ u32 year;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
+ cpu_relax();
+
+ sec = vrtc_cmos_read(RTC_SECONDS);
+ min = vrtc_cmos_read(RTC_MINUTES);
+ hour = vrtc_cmos_read(RTC_HOURS);
+ mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+ mon = vrtc_cmos_read(RTC_MONTH);
+ year = vrtc_cmos_read(RTC_YEAR);
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ /* vRTC YEAR reg contains the offset to 1972 */
+ year += 1972;
+
+ pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
+ "mon: %d year: %d\n", sec, min, hour, mday, mon, year);
+
+ now->tv_sec = mktime(year, mon, mday, hour, min, sec);
+ now->tv_nsec = 0;
+}
+
+int vrtc_set_mmss(const struct timespec *now)
+{
+ unsigned long flags;
+ struct rtc_time tm;
+ int year;
+ int retval = 0;
+
+ rtc_time_to_tm(now->tv_sec, &tm);
+ if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
+ /*
+ * tm.year is the number of years since 1900, and the
+ * vrtc need the years since 1972.
+ */
+ year = tm.tm_year - 72;
+ spin_lock_irqsave(&rtc_lock, flags);
+ vrtc_cmos_write(year, RTC_YEAR);
+ vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
+ vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
+ vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
+ vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
+ vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ } else {
+ pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
+ __FUNCTION__, now->tv_sec);
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+void __init mrst_rtc_init(void)
+{
+ unsigned long vrtc_paddr;
+
+ sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+
+ vrtc_paddr = sfi_mrtc_array[0].phys_addr;
+ if (!sfi_mrtc_num || !vrtc_paddr)
+ return;
+
+ vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
+ vrtc_paddr);
+ x86_platform.get_wallclock = vrtc_get_time;
+ x86_platform.set_wallclock = vrtc_set_mmss;
+}
+
+/*
+ * The Moorestown platform has a memory mapped virtual RTC device that emulates
+ * the programming interface of the RTC.
+ */
+
+static struct resource vrtc_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device vrtc_device = {
+ .name = "rtc_mrst",
+ .id = -1,
+ .resource = vrtc_resources,
+ .num_resources = ARRAY_SIZE(vrtc_resources),
+};
+
+/* Register the RTC device if appropriate */
+static int __init mrst_device_create(void)
+{
+ /* No Moorestown, no device */
+ if (!mrst_identify_cpu())
+ return -ENODEV;
+ /* No timer, no device */
+ if (!sfi_mrtc_num)
+ return -ENODEV;
+
+ /* iomem resource */
+ vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
+ vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
+ MRST_VRTC_MAP_SZ;
+ /* irq resource */
+ vrtc_resources[1].start = sfi_mrtc_array[0].irq;
+ vrtc_resources[1].end = sfi_mrtc_array[0].irq;
+
+ return platform_device_register(&vrtc_device);
+}
+
+module_init(mrst_device_create);
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
deleted file mode 100644
index af1da7e..0000000
--- a/arch/x86/platform/mrst/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_X86_INTEL_MID) += mrst.o
-obj-$(CONFIG_X86_INTEL_MID) += vrtc.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
deleted file mode 100644
index 39ecc27..0000000
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * early_printk_mrst.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements two early consoles named mrst and hsu.
- * mrst is based on Maxim3110 spi-uart device, it exists in both
- * Moorestown and Medfield platforms, while hsu is based on a High
- * Speed UART device which only exists in the Medfield platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/kmsg_dump.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/mrst.h>
-
-#define MRST_SPI_TIMEOUT 0x200000
-#define MRST_REGBASE_SPI0 0xff128000
-#define MRST_REGBASE_SPI1 0xff128400
-#define MRST_CLK_SPI0_REG 0xff11d86c
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET 0
-
-#define SPI_FRF_OFFSET 4
-#define SPI_FRF_SPI 0x0
-#define SPI_FRF_SSP 0x1
-#define SPI_FRF_MICROWIRE 0x2
-#define SPI_FRF_RESV 0x3
-
-#define SPI_MODE_OFFSET 6
-#define SPI_SCPH_OFFSET 6
-#define SPI_SCOL_OFFSET 7
-#define SPI_TMOD_OFFSET 8
-#define SPI_TMOD_TR 0x0 /* xmit & recv */
-#define SPI_TMOD_TO 0x1 /* xmit only */
-#define SPI_TMOD_RO 0x2 /* recv only */
-#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET 10
-#define SPI_SRL_OFFSET 11
-#define SPI_CFS_OFFSET 12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK 0x7f /* cover 7 bits */
-#define SR_BUSY (1 << 0)
-#define SR_TF_NOT_FULL (1 << 1)
-#define SR_TF_EMPT (1 << 2)
-#define SR_RF_NOT_EMPT (1 << 3)
-#define SR_RF_FULL (1 << 4)
-#define SR_TX_ERR (1 << 5)
-#define SR_DCOL (1 << 6)
-
-struct dw_spi_reg {
- u32 ctrl0;
- u32 ctrl1;
- u32 ssienr;
- u32 mwcr;
- u32 ser;
- u32 baudr;
- u32 txfltr;
- u32 rxfltr;
- u32 txflr;
- u32 rxflr;
- u32 sr;
- u32 imr;
- u32 isr;
- u32 risr;
- u32 txoicr;
- u32 rxoicr;
- u32 rxuicr;
- u32 msticr;
- u32 icr;
- u32 dmacr;
- u32 dmatdlr;
- u32 dmardlr;
- u32 idr;
- u32 version;
-
- /* Currently operates as 32 bits, though only the low 16 bits matter */
- u32 dr;
-} __packed;
-
-#define dw_readl(dw, name) __raw_readl(&(dw)->name)
-#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name)
-
-/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
-static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
-
-static u32 *pclk_spi0;
-/* Always contains an accessible address, start with 0 */
-static struct dw_spi_reg *pspi;
-
-static struct kmsg_dumper dw_dumper;
-static int dumper_registered;
-
-static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason)
-{
- static char line[1024];
- size_t len;
-
- /* When run to this, we'd better re-init the HW */
- mrst_early_console_init();
-
- while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
- early_mrst_console.write(&early_mrst_console, line, len);
-}
-
-/* Set the ratio rate to 115200, 8n1, IRQ disabled */
-static void max3110_write_config(void)
-{
- u16 config;
-
- config = 0xc001;
- dw_writel(pspi, dr, config);
-}
-
-/* Translate char to a eligible word and send to max3110 */
-static void max3110_write_data(char c)
-{
- u16 data;
-
- data = 0x8000 | c;
- dw_writel(pspi, dr, data);
-}
-
-void mrst_early_console_init(void)
-{
- u32 ctrlr0 = 0;
- u32 spi0_cdiv;
- u32 freq; /* Freqency info only need be searched once */
-
- /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
- pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
- MRST_CLK_SPI0_REG);
- spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
- freq = 100000000 / (spi0_cdiv + 1);
-
- if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
- mrst_spi_paddr = MRST_REGBASE_SPI1;
-
- pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
- mrst_spi_paddr);
-
- /* Disable SPI controller */
- dw_writel(pspi, ssienr, 0);
-
- /* Set control param, 8 bits, transmit only mode */
- ctrlr0 = dw_readl(pspi, ctrl0);
-
- ctrlr0 &= 0xfcc0;
- ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
- | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
- dw_writel(pspi, ctrl0, ctrlr0);
-
- /*
- * Change the spi0 clk to comply with 115200 bps, use 100000 to
- * calculate the clk dividor to make the clock a little slower
- * than real baud rate.
- */
- dw_writel(pspi, baudr, freq/100000);
-
- /* Disable all INT for early phase */
- dw_writel(pspi, imr, 0x0);
-
- /* Set the cs to spi-uart */
- dw_writel(pspi, ser, 0x2);
-
- /* Enable the HW, the last step for HW init */
- dw_writel(pspi, ssienr, 0x1);
-
- /* Set the default configuration */
- max3110_write_config();
-
- /* Register the kmsg dumper */
- if (!dumper_registered) {
- dw_dumper.dump = dw_kmsg_dump;
- kmsg_dump_register(&dw_dumper);
- dumper_registered = 1;
- }
-}
-
-/* Slave select should be called in the read/write function */
-static void early_mrst_spi_putc(char c)
-{
- unsigned int timeout;
- u32 sr;
-
- timeout = MRST_SPI_TIMEOUT;
- /* Early putc needs to make sure the TX FIFO is not full */
- while (--timeout) {
- sr = dw_readl(pspi, sr);
- if (!(sr & SR_TF_NOT_FULL))
- cpu_relax();
- else
- break;
- }
-
- if (!timeout)
- pr_warn("MRST earlycon: timed out\n");
- else
- max3110_write_data(c);
-}
-
-/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str,
- unsigned n)
-{
- int i;
-
- for (i = 0; i < n && *str; i++) {
- if (*str == '\n')
- early_mrst_spi_putc('\r');
- early_mrst_spi_putc(*str);
- str++;
- }
-}
-
-struct console early_mrst_console = {
- .name = "earlymrst",
- .write = early_mrst_spi_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT_BASE 0xffa28080
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(const char *s)
-{
- unsigned long paddr, port = 0;
- u8 lcr;
-
- /*
- * Select the early HSU console port if specified by user in the
- * kernel command line.
- */
- if (*s && !kstrtoul(s, 10, &port))
- port = clamp_val(port, 0, 2);
-
- paddr = HSU_PORT_BASE + port * 0x80;
- phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
-
- /* Disable FIFO */
- writeb(0x0, phsu + UART_FCR);
-
- /* Set to default 115200 bps, 8n1 */
- lcr = readb(phsu + UART_LCR);
- writeb((0x80 | lcr), phsu + UART_LCR);
- writeb(0x18, phsu + UART_DLL);
- writeb(lcr, phsu + UART_LCR);
- writel(0x3600, phsu + UART_MUL*4);
-
- writeb(0x8, phsu + UART_MCR);
- writeb(0x7, phsu + UART_FCR);
- writeb(0x3, phsu + UART_LCR);
-
- /* Clear IRQ status */
- readb(phsu + UART_LSR);
- readb(phsu + UART_RX);
- readb(phsu + UART_IIR);
- readb(phsu + UART_MSR);
-
- /* Enable FIFO */
- writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
- unsigned int timeout = 10000; /* 10ms */
- u8 status;
-
- while (--timeout) {
- status = readb(phsu + UART_LSR);
- if (status & BOTH_EMPTY)
- break;
- udelay(1);
- }
-
- /* Only write the char when there was no timeout */
- if (timeout)
- writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
- int i;
-
- for (i = 0; i < n && *str; i++) {
- if (*str == '\n')
- early_hsu_putc('\r');
- early_hsu_putc(*str);
- str++;
- }
-}
-
-struct console early_hsu_console = {
- .name = "earlyhsu",
- .write = early_hsu_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
deleted file mode 100644
index 2a45eab..0000000
--- a/arch/x86/platform/mrst/mrst.c
+++ /dev/null
@@ -1,1054 +0,0 @@
-/*
- * mrst.c: Intel Moorestown platform specific setup code
- *
- * (C) Copyright 2008 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@intel.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#define pr_fmt(fmt) "mrst: " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
-
-#include <asm/setup.h>
-#include <asm/mpspec_def.h>
-#include <asm/hw_irq.h>
-#include <asm/apic.h>
-#include <asm/io_apic.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/apb_timer.h>
-#include <asm/reboot.h>
-
-/*
- * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
- * cmdline option x86_mrst_timer can be used to override the configuration
- * to prefer one or the other.
- * at runtime, there are basically three timer configurations:
- * 1. per cpu apbt clock only
- * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
- * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
- *
- * by default (without cmdline option), platform code first detects cpu type
- * to see if we are on lincroft or penwell, then set up both lapic or apbt
- * clocks accordingly.
- * i.e. by default, medfield uses configuration #2, moorestown uses #1.
- * config #3 is supported but not recommended on medfield.
- *
- * rating and feature summary:
- * lapic (with C3STOP) --------- 100
- * apbt (always-on) ------------ 110
- * lapic (always-on,ARAT) ------ 150
- */
-
-enum mrst_timer_options mrst_timer_options;
-
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-enum mrst_cpu_type __mrst_cpu_chip;
-EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
-
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-int sfi_mrtc_num;
-
-static void mrst_power_off(void)
-{
-}
-
-static void mrst_reboot(void)
-{
- intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
-}
-
-/* parse all the mtimer info to a static mtimer array */
-static int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_timer_table_entry *pentry;
- struct mpc_intsrc mp_irq;
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mtimer_num) {
- sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_timer_table_entry);
- pentry = (struct sfi_timer_table_entry *) sb->pentry;
- totallen = sfi_mtimer_num * sizeof(*pentry);
- memcpy(sfi_mtimer_array, pentry, totallen);
- }
-
- pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
- pentry = sfi_mtimer_array;
- for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
- pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
- " irq = %d\n", totallen, (u32)pentry->phys_addr,
- pentry->freq_hz, pentry->irq);
- if (!pentry->irq)
- continue;
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
- mp_irq.irqflag = 5;
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- }
-
- return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
- int i;
- if (hint < sfi_mtimer_num) {
- if (!sfi_mtimer_usage[hint]) {
- pr_debug("hint taken for timer %d irq %d\n",
- hint, sfi_mtimer_array[hint].irq);
- sfi_mtimer_usage[hint] = 1;
- return &sfi_mtimer_array[hint];
- }
- }
- /* take the first timer available */
- for (i = 0; i < sfi_mtimer_num;) {
- if (!sfi_mtimer_usage[i]) {
- sfi_mtimer_usage[i] = 1;
- return &sfi_mtimer_array[i];
- }
- i++;
- }
- return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
- int i;
- for (i = 0; i < sfi_mtimer_num;) {
- if (mtmr->irq == sfi_mtimer_array[i].irq) {
- sfi_mtimer_usage[i] = 0;
- return;
- }
- i++;
- }
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_rtc_table_entry *pentry;
- struct mpc_intsrc mp_irq;
-
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mrtc_num) {
- sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_rtc_table_entry);
- pentry = (struct sfi_rtc_table_entry *)sb->pentry;
- totallen = sfi_mrtc_num * sizeof(*pentry);
- memcpy(sfi_mrtc_array, pentry, totallen);
- }
-
- pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
- pentry = sfi_mrtc_array;
- for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
- pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
- totallen, (u32)pentry->phys_addr, pentry->irq);
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = 0xf; /* level trigger and active low */
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- }
- return 0;
-}
-
-static unsigned long __init mrst_calibrate_tsc(void)
-{
- unsigned long fast_calibrate;
- u32 lo, hi, ratio, fsb;
-
- rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
- pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
- ratio = (hi >> 8) & 0x1f;
- pr_debug("ratio is %d\n", ratio);
- if (!ratio) {
- pr_err("read a zero ratio, should be incorrect!\n");
- pr_err("force tsc ratio to 16 ...\n");
- ratio = 16;
- }
- rdmsr(MSR_FSB_FREQ, lo, hi);
- if ((lo & 0x7) == 0x7)
- fsb = PENWELL_FSB_FREQ_83SKU;
- else
- fsb = PENWELL_FSB_FREQ_100SKU;
- fast_calibrate = ratio * fsb;
- pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
- lapic_timer_frequency = fsb * 1000 / HZ;
- /* mark tsc clocksource as reliable */
- set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-
- if (fast_calibrate)
- return fast_calibrate;
-
- return 0;
-}
-
-static void __init mrst_time_init(void)
-{
- sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
- switch (mrst_timer_options) {
- case MRST_TIMER_APBT_ONLY:
- break;
- case MRST_TIMER_LAPIC_APBT:
- x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
- x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
- break;
- default:
- if (!boot_cpu_has(X86_FEATURE_ARAT))
- break;
- x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
- x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
- return;
- }
- /* we need at least one APB timer */
- pre_init_apic_IRQ0();
- apbt_time_init();
-}
-
-static void mrst_arch_setup(void)
-{
- if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
- __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
- else {
- pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
- boot_cpu_data.x86, boot_cpu_data.x86_model);
- __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
- }
-}
-
-/* MID systems don't have i8042 controller */
-static int mrst_i8042_detect(void)
-{
- return 0;
-}
-
-/*
- * Moorestown does not have external NMI source nor port 0x61 to report
- * NMI status. The possible NMI sources are from pmu as a result of NMI
- * watchdog or lock debug. Reading io port 0x61 results in 0xff which
- * misled NMI handler.
- */
-static unsigned char mrst_get_nmi_reason(void)
-{
- return 0;
-}
-
-/*
- * Moorestown specific x86_init function overrides and early setup
- * calls.
- */
-void __init x86_mrst_early_setup(void)
-{
- x86_init.resources.probe_roms = x86_init_noop;
- x86_init.resources.reserve_resources = x86_init_noop;
-
- x86_init.timers.timer_init = mrst_time_init;
- x86_init.timers.setup_percpu_clockev = x86_init_noop;
-
- x86_init.irqs.pre_vector_init = x86_init_noop;
-
- x86_init.oem.arch_setup = mrst_arch_setup;
-
- x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
-
- x86_platform.calibrate_tsc = mrst_calibrate_tsc;
- x86_platform.i8042_detect = mrst_i8042_detect;
- x86_init.timers.wallclock_init = mrst_rtc_init;
- x86_platform.get_nmi_reason = mrst_get_nmi_reason;
-
- x86_init.pci.init = pci_mrst_init;
- x86_init.pci.fixup_irqs = x86_init_noop;
-
- legacy_pic = &null_legacy_pic;
-
- /* Moorestown specific power_off/restart method */
- pm_power_off = mrst_power_off;
- machine_ops.emergency_restart = mrst_reboot;
-
- /* Avoid searching for BIOS MP tables */
- x86_init.mpparse.find_smp_config = x86_init_noop;
- x86_init.mpparse.get_smp_config = x86_init_uint_noop;
- set_bit(MP_BUS_ISA, mp_bus_not_pci);
-}
-
-/*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_mrst_timer(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (strcmp("apbt_only", arg) == 0)
- mrst_timer_options = MRST_TIMER_APBT_ONLY;
- else if (strcmp("lapic_and_apbt", arg) == 0)
- mrst_timer_options = MRST_TIMER_LAPIC_APBT;
- else {
- pr_warn("X86 MRST timer option %s not recognised"
- " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
- arg);
- return -EINVAL;
- }
- return 0;
-}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_gpio_table_entry *pentry;
- int num, i;
-
- if (gpio_table)
- return 0;
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
- pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
- gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
- if (!gpio_table)
- return -1;
- memcpy(gpio_table, pentry, num * sizeof(*pentry));
- gpio_num_entry = num;
-
- pr_debug("GPIO pin info:\n");
- for (i = 0; i < num; i++, pentry++)
- pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
- " pin = %d\n", i,
- pentry->controller_name,
- pentry->pin_name,
- pentry->pin_no);
- return 0;
-}
-
-static int get_gpio_by_name(const char *name)
-{
- struct sfi_gpio_table_entry *pentry = gpio_table;
- int i;
-
- if (!pentry)
- return -1;
- for (i = 0; i < gpio_num_entry; i++, pentry++) {
- if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
- return pentry->pin_no;
- }
- return -1;
-}
-
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
- char name[SFI_NAME_LEN + 1];
- u8 type;
- u8 delay;
- void *(*get_platform_data)(void *info);
-};
-
-/* the offset for the mapping of global gpio pin to irq */
-#define MRST_IRQ_OFFSET 0x100
-
-static void __init *pmic_gpio_platform_data(void *info)
-{
- static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
- int gpio_base = get_gpio_by_name("pmic_gpio_base");
-
- if (gpio_base == -1)
- gpio_base = 64;
- pmic_gpio_pdata.gpio_base = gpio_base;
- pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
- pmic_gpio_pdata.gpiointr = 0xffffeff8;
-
- return &pmic_gpio_pdata;
-}
-
-static void __init *max3111_platform_data(void *info)
-{
- struct spi_board_info *spi_info = info;
- int intr = get_gpio_by_name("max3111_int");
-
- spi_info->mode = SPI_MODE_0;
- if (intr == -1)
- return NULL;
- spi_info->irq = intr + MRST_IRQ_OFFSET;
- return NULL;
-}
-
-/* we have multiple max7315 on the board ... */
-#define MAX7315_NUM 2
-static void __init *max7315_platform_data(void *info)
-{
- static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
- static int nr;
- struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- if (nr == MAX7315_NUM) {
- pr_err("too many max7315s, we only support %d\n",
- MAX7315_NUM);
- return NULL;
- }
- /* we have several max7315 on the board, we only need load several
- * instances of the same pca953x driver to cover them
- */
- strcpy(i2c_info->type, "max7315");
- if (nr++) {
- sprintf(base_pin_name, "max7315_%d_base", nr);
- sprintf(intr_pin_name, "max7315_%d_int", nr);
- } else {
- strcpy(base_pin_name, "max7315_base");
- strcpy(intr_pin_name, "max7315_int");
- }
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base == -1)
- return NULL;
- max7315->gpio_base = gpio_base;
- if (intr != -1) {
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- max7315->irq_base = -1;
- }
- return max7315;
-}
-
-static void *tca6416_platform_data(void *info)
-{
- static struct pca953x_platform_data tca6416;
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- strcpy(i2c_info->type, "tca6416");
- strcpy(base_pin_name, "tca6416_base");
- strcpy(intr_pin_name, "tca6416_int");
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base == -1)
- return NULL;
- tca6416.gpio_base = gpio_base;
- if (intr != -1) {
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- tca6416.irq_base = -1;
- }
- return &tca6416;
-}
-
-static void *mpu3050_platform_data(void *info)
-{
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("mpu3050_int");
-
- if (intr == -1)
- return NULL;
-
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- return NULL;
-}
-
-static void __init *emc1403_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("thermal_int");
- int intr2nd = get_gpio_by_name("thermal_alert");
-
- if (intr == -1 || intr2nd == -1)
- return NULL;
-
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static void __init *lis331dl_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("accel_int");
- int intr2nd = get_gpio_by_name("accel_2");
-
- if (intr == -1 || intr2nd == -1)
- return NULL;
-
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static void __init *no_platform_data(void *info)
-{
- return NULL;
-}
-
-static struct resource msic_resources[] = {
- {
- .start = INTEL_MSIC_IRQ_PHYS_BASE,
- .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct intel_msic_platform_data msic_pdata;
-
-static struct platform_device msic_device = {
- .name = "intel_msic",
- .id = -1,
- .dev = {
- .platform_data = &msic_pdata,
- },
- .num_resources = ARRAY_SIZE(msic_resources),
- .resource = msic_resources,
-};
-
-static inline bool mrst_has_msic(void)
-{
- return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
-}
-
-static int msic_scu_status_change(struct notifier_block *nb,
- unsigned long code, void *data)
-{
- if (code == SCU_DOWN) {
- platform_device_unregister(&msic_device);
- return 0;
- }
-
- return platform_device_register(&msic_device);
-}
-
-static int __init msic_init(void)
-{
- static struct notifier_block msic_scu_notifier = {
- .notifier_call = msic_scu_status_change,
- };
-
- /*
- * We need to be sure that the SCU IPC is ready before MSIC device
- * can be registered.
- */
- if (mrst_has_msic())
- intel_scu_notifier_add(&msic_scu_notifier);
-
- return 0;
-}
-arch_initcall(msic_init);
-
-/*
- * msic_generic_platform_data - sets generic platform data for the block
- * @info: pointer to the SFI device table entry for this block
- * @block: MSIC block
- *
- * Function sets IRQ number from the SFI table entry for given device to
- * the MSIC platform data.
- */
-static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
-{
- struct sfi_device_table_entry *entry = info;
-
- BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
- msic_pdata.irq[block] = entry->irq;
-
- return no_platform_data(info);
-}
-
-static void *msic_battery_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
-}
-
-static void *msic_gpio_platform_data(void *info)
-{
- static struct intel_msic_gpio_pdata pdata;
- int gpio = get_gpio_by_name("msic_gpio_base");
-
- if (gpio < 0)
- return NULL;
-
- pdata.gpio_base = gpio;
- msic_pdata.gpio = &pdata;
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
-}
-
-static void *msic_audio_platform_data(void *info)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
- if (IS_ERR(pdev)) {
- pr_err("failed to create audio platform device\n");
- return NULL;
- }
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
-}
-
-static void *msic_power_btn_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static void *msic_ocd_platform_data(void *info)
-{
- static struct intel_msic_ocd_pdata pdata;
- int gpio = get_gpio_by_name("ocd_gpio");
-
- if (gpio < 0)
- return NULL;
-
- pdata.gpio = gpio;
- msic_pdata.ocd = &pdata;
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
-}
-
-static void *msic_thermal_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
-}
-
-/* tc35876x DSI-LVDS bridge chip and panel platform data */
-static void *tc35876x_platform_data(void *data)
-{
- static struct tc35876x_platform_data pdata;
-
- /* gpio pins set to -1 will not be used by the driver */
- pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
- pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
- pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
-
- return &pdata;
-}
-
-static const struct devs_id __initconst device_ids[] = {
- {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
- {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
- {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
- {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
- {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
- {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
- {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
- {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
- {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
- {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
- {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
- {"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
-
- /* MSIC subdevices */
- {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
- {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
- {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
- {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
- {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
- {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
-
- {},
-};
-
-#define MAX_IPCDEVS 24
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static int ipc_next_dev;
-
-#define MAX_SCU_SPI 24
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static int spi_next_dev;
-
-#define MAX_SCU_I2C 24
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static int i2c_bus[MAX_SCU_I2C];
-static int i2c_next_dev;
-
-static void __init intel_scu_device_register(struct platform_device *pdev)
-{
- if (ipc_next_dev == MAX_IPCDEVS)
- pr_err("too many SCU IPC devices");
- else
- ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
- struct spi_board_info *new_dev;
-
- if (spi_next_dev == MAX_SCU_SPI) {
- pr_err("too many SCU SPI devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed spi dev %s\n",
- sdev->modalias);
- return;
- }
- memcpy(new_dev, sdev, sizeof(*sdev));
-
- spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
- struct i2c_board_info *idev)
-{
- struct i2c_board_info *new_dev;
-
- if (i2c_next_dev == MAX_SCU_I2C) {
- pr_err("too many SCU I2C devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed i2c dev %s\n",
- idev->type);
- return;
- }
- memcpy(new_dev, idev, sizeof(*idev));
-
- i2c_bus[i2c_next_dev] = bus;
- i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
- int i;
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_add(ipc_devs[i]);
-
- for (i = 0; i < spi_next_dev; i++)
- spi_register_board_info(spi_devs[i], 1);
-
- for (i = 0; i < i2c_next_dev; i++) {
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- adapter = i2c_get_adapter(i2c_bus[i]);
- if (adapter) {
- client = i2c_new_device(adapter, i2c_devs[i]);
- if (!client)
- pr_err("can't create i2c device %s\n",
- i2c_devs[i]->type);
- } else
- i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
- }
- intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
- int i;
-
- intel_scu_notifier_post(SCU_DOWN, NULL);
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
- /* Single threaded */
- static struct resource __initdata res = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
- res.start = irq;
- platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
-{
- const struct devs_id *dev = device_ids;
- struct platform_device *pdev;
- void *pdata = NULL;
-
- while (dev->name[0]) {
- if (dev->type == SFI_DEV_TYPE_IPC &&
- !strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(entry);
- break;
- }
- dev++;
- }
-
- /*
- * On Medfield the platform device creation is handled by the MSIC
- * MFD driver so we don't need to do it here.
- */
- if (mrst_has_msic())
- return;
-
- pdev = platform_device_alloc(entry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- entry->name);
- return;
- }
- install_irq_resource(pdev, entry->irq);
-
- pdev->dev.platform_data = pdata;
- intel_scu_device_register(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
-{
- const struct devs_id *dev = device_ids;
- void *pdata = NULL;
-
- while (dev->name[0]) {
- if (dev->type == SFI_DEV_TYPE_SPI &&
- !strncmp(dev->name, spi_info->modalias,
- SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(spi_info);
- break;
- }
- dev++;
- }
- spi_info->platform_data = pdata;
- if (dev->delay)
- intel_scu_spi_device_register(spi_info);
- else
- spi_register_board_info(spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
-{
- const struct devs_id *dev = device_ids;
- void *pdata = NULL;
-
- while (dev->name[0]) {
- if (dev->type == SFI_DEV_TYPE_I2C &&
- !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(i2c_info);
- break;
- }
- dev++;
- }
- i2c_info->platform_data = pdata;
-
- if (dev->delay)
- intel_scu_i2c_device_register(bus, i2c_info);
- else
- i2c_register_board_info(bus, i2c_info, 1);
-}
-
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_device_table_entry *pentry;
- struct spi_board_info spi_info;
- struct i2c_board_info i2c_info;
- int num, i, bus;
- int ioapic;
- struct io_apic_irq_attr irq_attr;
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
- pentry = (struct sfi_device_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++, pentry++) {
- int irq = pentry->irq;
-
- if (irq != (u8)0xff) { /* native RTE case */
- /* these SPI2 devices are not exposed to system as PCI
- * devices, but they have separate RTE entry in IOAPIC
- * so we have to enable them one by one here
- */
- ioapic = mp_find_ioapic(irq);
- irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = irq;
- irq_attr.trigger = 1;
- irq_attr.polarity = 1;
- io_apic_set_pci_routing(NULL, irq, &irq_attr);
- } else
- irq = 0; /* No irq */
-
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- pr_debug("info[%2d]: IPC bus, name = %16.16s, "
- "irq = 0x%2x\n", i, pentry->name, pentry->irq);
- sfi_handle_ipc_dev(pentry);
- break;
- case SFI_DEV_TYPE_SPI:
- memset(&spi_info, 0, sizeof(spi_info));
- strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = irq;
- spi_info.bus_num = pentry->host_num;
- spi_info.chip_select = pentry->addr;
- spi_info.max_speed_hz = pentry->max_freq;
- pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
- "irq = 0x%2x, max_freq = %d, cs = %d\n", i,
- spi_info.bus_num,
- spi_info.modalias,
- spi_info.irq,
- spi_info.max_speed_hz,
- spi_info.chip_select);
- sfi_handle_spi_dev(&spi_info);
- break;
- case SFI_DEV_TYPE_I2C:
- memset(&i2c_info, 0, sizeof(i2c_info));
- bus = pentry->host_num;
- strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = irq;
- i2c_info.addr = pentry->addr;
- pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
- "irq = 0x%2x, addr = 0x%x\n", i, bus,
- i2c_info.type,
- i2c_info.irq,
- i2c_info.addr);
- sfi_handle_i2c_dev(bus, &i2c_info);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
- }
- }
- return 0;
-}
-
-static int __init mrst_platform_init(void)
-{
- sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
- sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
- return 0;
-}
-arch_initcall(mrst_platform_init);
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
- {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
- {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
- {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
- {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
- {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
- {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
- {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
- {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
-};
-
-static struct gpio_keys_platform_data mrst_gpio_keys = {
- .buttons = gpio_button,
- .rep = 1,
- .nbuttons = -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mrst_gpio_keys,
- },
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
- struct gpio_keys_button *gb = gpio_button;
- int i, num, good = 0;
-
- num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
- for (i = 0; i < num; i++) {
- gb[i].gpio = get_gpio_by_name(gb[i].desc);
- pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
- gb[i].gpio);
- if (gb[i].gpio == -1)
- continue;
-
- if (i != good)
- gb[good] = gb[i];
- good++;
- }
-
- if (good) {
- mrst_gpio_keys.nbuttons = good;
- return platform_device_register(&pb_device);
- }
- return 0;
-}
-late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
deleted file mode 100644
index ca4f7d9..0000000
--- a/arch/x86/platform/mrst/vrtc.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * vrtc.c: Driver for virtual RTC device on Intel MID platform
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- *
- * Note:
- * VRTC is emulated by system controller firmware, the real HW
- * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
- * in a memory mapped IO space that is visible to the host IA
- * processor.
- *
- * This driver is based on RTC CMOS driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/platform_device.h>
-
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
-#include <asm/time.h>
-#include <asm/fixmap.h>
-
-static unsigned char __iomem *vrtc_virt_base;
-
-unsigned char vrtc_cmos_read(unsigned char reg)
-{
- unsigned char retval;
-
- /* vRTC's registers range from 0x0 to 0xD */
- if (reg > 0xd || !vrtc_virt_base)
- return 0xff;
-
- lock_cmos_prefix(reg);
- retval = __raw_readb(vrtc_virt_base + (reg << 2));
- lock_cmos_suffix(reg);
- return retval;
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_read);
-
-void vrtc_cmos_write(unsigned char val, unsigned char reg)
-{
- if (reg > 0xd || !vrtc_virt_base)
- return;
-
- lock_cmos_prefix(reg);
- __raw_writeb(val, vrtc_virt_base + (reg << 2));
- lock_cmos_suffix(reg);
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_write);
-
-void vrtc_get_time(struct timespec *now)
-{
- u8 sec, min, hour, mday, mon;
- unsigned long flags;
- u32 year;
-
- spin_lock_irqsave(&rtc_lock, flags);
-
- while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
- cpu_relax();
-
- sec = vrtc_cmos_read(RTC_SECONDS);
- min = vrtc_cmos_read(RTC_MINUTES);
- hour = vrtc_cmos_read(RTC_HOURS);
- mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
- mon = vrtc_cmos_read(RTC_MONTH);
- year = vrtc_cmos_read(RTC_YEAR);
-
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- /* vRTC YEAR reg contains the offset to 1972 */
- year += 1972;
-
- pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
- "mon: %d year: %d\n", sec, min, hour, mday, mon, year);
-
- now->tv_sec = mktime(year, mon, mday, hour, min, sec);
- now->tv_nsec = 0;
-}
-
-int vrtc_set_mmss(const struct timespec *now)
-{
- unsigned long flags;
- struct rtc_time tm;
- int year;
- int retval = 0;
-
- rtc_time_to_tm(now->tv_sec, &tm);
- if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
- /*
- * tm.year is the number of years since 1900, and the
- * vrtc need the years since 1972.
- */
- year = tm.tm_year - 72;
- spin_lock_irqsave(&rtc_lock, flags);
- vrtc_cmos_write(year, RTC_YEAR);
- vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
- vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
- vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
- vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
- vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
- spin_unlock_irqrestore(&rtc_lock, flags);
- } else {
- pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
- __FUNCTION__, now->tv_sec);
- retval = -EINVAL;
- }
- return retval;
-}
-
-void __init mrst_rtc_init(void)
-{
- unsigned long vrtc_paddr;
-
- sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-
- vrtc_paddr = sfi_mrtc_array[0].phys_addr;
- if (!sfi_mrtc_num || !vrtc_paddr)
- return;
-
- vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
- vrtc_paddr);
- x86_platform.get_wallclock = vrtc_get_time;
- x86_platform.set_wallclock = vrtc_set_mmss;
-}
-
-/*
- * The Moorestown platform has a memory mapped virtual RTC device that emulates
- * the programming interface of the RTC.
- */
-
-static struct resource vrtc_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device vrtc_device = {
- .name = "rtc_mrst",
- .id = -1,
- .resource = vrtc_resources,
- .num_resources = ARRAY_SIZE(vrtc_resources),
-};
-
-/* Register the RTC device if appropriate */
-static int __init mrst_device_create(void)
-{
- /* No Moorestown, no device */
- if (!mrst_identify_cpu())
- return -ENODEV;
- /* No timer, no device */
- if (!sfi_mrtc_num)
- return -ENODEV;
-
- /* iomem resource */
- vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
- vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
- MRST_VRTC_MAP_SZ;
- /* irq resource */
- vrtc_resources[1].start = sfi_mrtc_array[0].irq;
- vrtc_resources[1].end = sfi_mrtc_array[0].irq;
-
- return platform_device_register(&vrtc_device);
-}
-
-module_init(mrst_device_create);
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
index 45d5af0..5b646c1 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
@@ -39,7 +39,7 @@
#include "psb_intel_reg.h"
#include "mdfld_output.h"

-#include <asm/mrst.h>
+#include <asm/intel-mid.h>

#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))
#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 08747fd..7a9ce00 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -26,7 +26,7 @@
#include "psb_drv.h"
#include "psb_reg.h"
#include "psb_intel_reg.h"
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
#include "mid_bios.h"
#include "intel_bios.h"
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
index e77d721..3ece553 100644
--- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -22,7 +22,7 @@

#include <linux/i2c.h>
#include <drm/drmP.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>

#include "intel_bios.h"
#include "psb_drv.h"
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 9215ed7..5f8f6c9 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -25,7 +25,7 @@
#include <linux/interrupt.h>
#include <linux/sfi.h>
#include <linux/module.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>

/* IPC defines the following message types */
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 578baf9..315209d9 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -38,8 +38,8 @@

#include <asm-generic/rtc.h>
#include <asm/intel_scu_ipc.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>

struct mrst_rtc {
struct rtc_device *rtc;
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 9dda2d0..07964d8 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -48,7 +48,7 @@
#include <linux/atomic.h>
#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>

#include "intel_scu_watchdog.h"

--
1.8.4.rc3


\
 
 \ /
  Last update: 2013-10-18 00:21    [W:0.204 / U:4.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site