lkml.org 
[lkml]   [2013]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/2] ARM: OMAP4460: cpuidle: WA for ROM bug because of CA9 r2pX gic control register change
On Thursday 17 October 2013 05:24 AM, Grygorii Strashko wrote:
> On OMAP4+ devices, GIC register context is lost when MPUSS hits the
> OSWR. On the CPU wakeup path, ROM code gets executed and one of the
> steps in it is to restore the saved context of the GIC.
>
> The ROM code uses GICD != 1 condition to decide how the GIC registers
> are handled in wakeup path from OSWR. But, GICD register has changed
> between CortexA9 r1pX and r2pX and it contains 2 bits now. Secure view
> which ROM code sees:
> bit 1 == Enable Non-secure
> bit 0 == Enable secure
> Non-secure view which HLOS sees:
> bit 0 == Enable Non-secure
>
> As result, on OMAP4460(r2pX) devices, when the ROM code is executed
> during CPU1 wakeup, GICD == 3 and it fails to understand the real wakeup
> power state and reconfigures GIC distributor to boot values and, as
> result, the entire interrupt controller context will loose in a live
> system.
>
> Hence, implement a workaround on OMAP4460 devices in case if MPUSS has
> hit OSWR - as long as CPU1 sees GICD == 1 in it's wakeup path from OSWR,
> the issue won't happen:
> 1.1) CPU0 must disable the GIC distributor, before doing the CPU1
> wakeup,
> 1.2) CPU0 should wait until CPU1 will re-enable the GIC distributor
> 2) CPU1 must re-enable the GIC distributor on it's wakeup path.
>
> The workaround for CPUIdle has been implemented in the same way as
> for boot-up & hot-plug path in:
> - http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;
> a=commitdiff;h=ff999b8a0983ee15668394ed49e38d3568fc6859
>
> For more information see:
> - https://patchwork.kernel.org/patch/1609011/
> - http://www.spinics.net/lists/arm-kernel/msg201402.html
>
> The ROM code bug is applicable to only OMAP4460(r2pX) devices.
> OMAP4470 (also r2pX) is not affected by this bug because ROM code has been
> fixed.
>
Just give reference to the commit which has best description about
the bug and just say applying the fix for idle case.

ff999b8a {ARM: OMAP4460: Workaround for ROM...}

> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Reported-and-Tested-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> arch/arm/mach-omap2/common.h | 1 +
> arch/arm/mach-omap2/cpuidle44xx.c | 34 +++++++++++++++++++++++++++++++++-
> arch/arm/mach-omap2/omap4-common.c | 6 ++++++
> 3 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index b875a4a..7957110 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -232,6 +232,7 @@ static inline void __iomem *omap4_get_scu_base(void)
>
> extern void __init gic_init_irq(void);
> extern void gic_dist_disable(void);
> +extern void gic_dist_enable(void);
> extern bool gic_dist_disabled(void);
> extern void gic_timer_retrigger(void);
> extern void omap_smc1(u32 fn, u32 arg);
> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
> index 384aa1c..528638b 100644
> --- a/arch/arm/mach-omap2/cpuidle44xx.c
> +++ b/arch/arm/mach-omap2/cpuidle44xx.c
> @@ -80,6 +80,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
> int index)
> {
> struct idle_statedata *cx = state_ptr + index;
> + u32 mpuss_context_lost = 0;
>
> /*
> * CPU0 has to wait and stay ON until CPU1 is OFF state.
> @@ -126,13 +127,44 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
> omap4_enter_lowpower(dev->cpu, cx->cpu_state);
> cpu_done[dev->cpu] = true;
>
> + mpuss_context_lost = omap4_mpuss_read_prev_context_state();
> +
Just use the targeted state since couple idle almost grantees
the low power entry. Even in failed case, applying errata sequence
is harmless.

> /* Wakeup CPU1 only if it is not offlined */
> if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
> + /*
> + * GIC distributor control register has changed between
> + * CortexA9 r1pX and r2pX. The Control Register secure
> + * banked version is now composed of 2 bits:
> + * bit 0 == Secure Enable
> + * bit 1 == Non-Secure Enable
> + * The Non-Secure banked register has not changed
> + * Because the ROM Code is based on the r1pX GIC, the CPU1
> + * GIC restoration will cause a problem to CPU0 Non-Secure SW.
> + * The workaround must be:
> + * 1) Before doing the CPU1 wakeup, CPU0 must disable
> + * the GIC distributor and wait until it will be enabled by CPU1
> + * 2) CPU1 must re-enable the GIC distributor on
> + * it's wakeup path.
> + */
> + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
> + mpuss_context_lost)
Use target state here..

> + gic_dist_disable();
> +
> clkdm_wakeup(cpu_clkdm[1]);
> omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
> clkdm_allow_idle(cpu_clkdm[1]);
> +
> + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
> + mpuss_context_lost)
> + while (gic_dist_disabled()) {
> + udelay(1);
> + cpu_relax();
> + }
Am surprised you didn't live lock here. CPUs can wait here infinitely
because the distributor isn't turned on in idle case. Suspend case,
CPU1 on its boot-up will enable distributor and hence everything works
with above check.

> }
>
> + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) && dev->cpu)
> + gic_dist_enable();
> +
Just move this code under omap-mpuss-lowpower.c and then things should work
properly. It won't affect suspend code since suspend path is different.

Thanks for the fix though...

Regards,
Santosh


\
 
 \ /
  Last update: 2013-10-17 17:41    [W:0.418 / U:1.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site