lkml.org 
[lkml]   [2013]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 0/4] Add I2C support to ST SoCs
Hi Wolfram,

On 10/14/2013 02:46 PM, Maxime COQUELIN wrote:
> The goal of this series is to add I2C support to ST SoCs.
> The DT definition is added for STiH415 and STiH416 SoCs on
> B2000 and B2020 boards.
>
> The series has been tested working on STiH416-B2020 board.
> It applies on top of v3.12-rc5.
>
> Changes since v4:
> - Fixed IRQ flags to level high triggering as reported by Stephen Gallimore
> - Revert back to generic DT properties for Anti-glitch filtering. Their DT
> binding documentation will be updated when i2c DT binding docuementation
> will be created (In Wolfram's ToDo list)
Do you agree with this approach?

Did you had time to review the driver?

Regards,
Maxime

> ...
>
> Maxime Coquelin (4):
> i2c: busses: i2c-st: Add ST I2C controller
> ARM: STi: Supply I2C configuration to STiH416 SoC
> ARM: STi: Supply I2C configuration to STiH415 SoC
> ARM: STi: Add I2C config to B2000 and B2020 boards
>
> Documentation/devicetree/bindings/i2c/i2c-st.txt | 38 +
> arch/arm/boot/dts/stih415-pinctrl.dtsi | 36 +
> arch/arm/boot/dts/stih415.dtsi | 53 ++
> arch/arm/boot/dts/stih416-pinctrl.dtsi | 35 +
> arch/arm/boot/dts/stih416.dtsi | 53 ++
> arch/arm/boot/dts/stih41x-b2000.dtsi | 9 +
> arch/arm/boot/dts/stih41x-b2020.dtsi | 22 +
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-st.c | 867 ++++++++++++++++++++++
> 10 files changed, 1124 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-st.txt
> create mode 100644 drivers/i2c/busses/i2c-st.c
>


\
 
 \ /
  Last update: 2013-10-16 17:21    [W:0.321 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site