lkml.org 
[lkml]   [2013]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
On 10/16/2013 04:10 PM, Kishon Vijay Abraham I wrote:
> Hi roger,
>
> On Wednesday 16 October 2013 06:33 PM, Roger Quadros wrote:
>> Hi Kishon,
>>
>> On 10/15/2013 10:54 PM, Kishon Vijay Abraham I wrote:
>>> There can be systems which does not have a external usb_phy, so get
>>> usb_phy only if dt data indicates the presence of PHY in the case of dt boot or
>>> if platform_data indicates the presence of PHY. Also remove checking if
>>> return value is -ENXIO since it's now changed to always enable usb_phy layer.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> ---
>>> In usb_get_phy_by_phandle, index 0 always refers to usb2 phy and index 1 always
>>> refers to usb3 phy. Since we've lived so long with this, this patch will make
>>> an assumption that if only one entry is populated in *usb-phy* property, it will
>>> be usb2 phy and the next entry will be usb3 phy.
>>>
>>> drivers/usb/dwc3/Kconfig | 1 +
>>> drivers/usb/dwc3/core.c | 72 ++++++++++++++++++++------------------
>>> drivers/usb/dwc3/platform_data.h | 2 ++
>>> 3 files changed, 41 insertions(+), 34 deletions(-)
>>>
>>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>>> index 70fc430..8e385b4 100644
>>> --- a/drivers/usb/dwc3/Kconfig
>>> +++ b/drivers/usb/dwc3/Kconfig
>>> @@ -1,6 +1,7 @@
>>> config USB_DWC3
>>> tristate "DesignWare USB3 DRD Core Support"
>>> depends on (USB || USB_GADGET) && HAS_DMA
>>> + select USB_PHY
>>> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>>> help
>>> Say Y or M here if your system has a Dual Role SuperSpeed
>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>> index 474162e..cb91d70 100644
>>> --- a/drivers/usb/dwc3/core.c
>>> +++ b/drivers/usb/dwc3/core.c
>>> @@ -354,6 +354,7 @@ static int dwc3_probe(struct platform_device *pdev)
>>> struct device_node *node = dev->of_node;
>>> struct resource *res;
>>> struct dwc3 *dwc;
>>> + int count;
>>>
>>> int ret = -ENOMEM;
>>>
>>> @@ -387,16 +388,49 @@ static int dwc3_probe(struct platform_device *pdev)
>>> if (node) {
>>> dwc->maximum_speed = of_usb_get_maximum_speed(node);
>>>
>>> - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
>>> - dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
>>> + count = of_count_phandle_with_args(node, "usb-phy", NULL);
>>> + switch (count) {
>>> + case 2:
>>> + dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev,
>>> + "usb-phy", 1);
>>> + if (IS_ERR(dwc->usb3_phy)) {
>>> + dev_err(dev, "usb3 phy not found\n");
>>> + return PTR_ERR(dwc->usb3_phy);
>>> + }
>>> + case 1:
>>> + dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev,
>>> + "usb-phy", 0);
>>> + if (IS_ERR(dwc->usb2_phy)) {
>>> + dev_err(dev, "usb2 phy not found\n");
>>> + return PTR_ERR(dwc->usb2_phy);
>>> + }
>>> + break;
>>
>> In the Exynos case, there is only 1 phy and it is the USB3 phy. This code
>> will wrongly treat it as usb2_phy.
>
> That was the case even before this patch no? Unfortunately the old USB PHY
> library doesn't have APIs to get PHYs in a better way. If we try modifying the
> USB PHY library, it'll be kind of duplicating what is already there in the
> Generic PHY library. I'd rather prefer Exynos guys to use the new framework.

OK. I agree with you.
Do you know if there are users of dwc3 other than exynos5250 and omap5?
If not, we should get rid of the old USB PHY altogether.

cheers,
-roger


\
 
 \ /
  Last update: 2013-10-16 16:01    [W:0.232 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site