lkml.org 
[lkml]   [2013]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] edac, highbank: Add Calxeda ECX-2000 support
Date
This patch series enables ECC edac support for Calxeda ECX-2000
(Midway). The ECX-2000 memory controller is similar to Highbank but
has different register bases for error and interrupt registers.

Testing the driver uncovered a bug in the interrupt initialization.
So there is also a fix for this for all the Highbank edac drivers. The
interrupt was enabled too early which caused a crash if there are
interrupts pending (ECC errors) during driver initialization.

Also some improvements and unification of edac log messages I found
useful.

-Robert


Rob Herring (1):
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

Robert Richter (4):
edac, highbank: Fix interrupt setup of mem and l2 controller
edac, highbank: Add Calxeda ECX-2000 support
edac, highbank: Improve and unify naming
edac: Unify reporting of device info for device, mc and pci

.../devicetree/bindings/arm/calxeda/mem-ctrlr.txt | 4 +-
arch/arm/boot/dts/ecx-2000.dts | 6 +
arch/arm/boot/dts/ecx-common.dtsi | 6 -
arch/arm/boot/dts/highbank.dts | 6 +
drivers/edac/edac_device.c | 9 +-
drivers/edac/edac_mc.c | 6 +-
drivers/edac/edac_pci.c | 8 +-
drivers/edac/highbank_l2_edac.c | 33 +++---
drivers/edac/highbank_mc_edac.c | 128 +++++++++++++--------
9 files changed, 127 insertions(+), 79 deletions(-)

--
1.8.4.rc3



\
 
 \ /
  Last update: 2013-10-16 13:41    [W:0.655 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site