lkml.org 
[lkml]   [2013]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 01/13] usb: phy: msm: Move mach depndend code to platform data
From
Date
On Mon, 2013-10-14 at 17:52 -0500, Felipe Balbi wrote: 
> Hi,
>
> On Mon, Oct 14, 2013 at 06:24:28PM +0300, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> >
> > This patch fix compilation error and is an intermediate step
> > before the addition of DeviceTree support for newer targets.
> >
> > Cc: David Brown <davidb@codeaurora.org>
> > Cc: Daniel Walker <dwalker@fifo99.com>
> > Cc: Felipe Balbi <balbi@ti.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> > ---
> > arch/arm/mach-msm/board-msm7x30.c | 35 +++++++++++++++++++++++++++++++++++
> > arch/arm/mach-msm/board-qsd8x50.c | 35 +++++++++++++++++++++++++++++++++++
> > drivers/usb/phy/phy-msm-usb.c | 34 ++++++++++++++--------------------
> > include/linux/usb/msm_hsusb.h | 3 +++
> > 4 files changed, 87 insertions(+), 20 deletions(-)
> >
> > diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
> > index f9af5a4..46de789 100644
> > --- a/arch/arm/mach-msm/board-msm7x30.c
> > +++ b/arch/arm/mach-msm/board-msm7x30.c
> > @@ -30,6 +30,7 @@
> > #include <asm/memory.h>
> > #include <asm/setup.h>
> >
> > +#include <mach/clk.h>
> > #include <mach/msm_iomap.h>
> > #include <mach/dma.h>
> >
> > @@ -60,10 +61,44 @@ static int hsusb_phy_init_seq[] = {
> > -1
> > };
> >
> > +static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
> > +{
> > + int ret;
> > +
> > + if (assert) {
> > + ret = clk_reset(link_clk, CLK_RESET_ASSERT);
> > + if (ret)
> > + pr_err("usb hs_clk assert failed\n");
> > + } else {
> > + ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
> > + if (ret)
> > + pr_err("usb hs_clk deassert failed\n");
> > + }
> > + return ret;
> > +}
> > +
> > +static int hsusb_phy_clk_reset(struct clk *phy_clk)
> > +{
> > + int ret;
> > +
> > + ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
> > + if (ret) {
> > + pr_err("usb phy clk assert failed\n");
> > + return ret;
> > + }
> > + usleep_range(10000, 12000);
> > + ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
> > + if (ret)
> > + pr_err("usb phy clk deassert failed\n");
> > + return ret;
> > +}
> > +
> > static struct msm_otg_platform_data msm_otg_pdata = {
> > .phy_init_seq = hsusb_phy_init_seq,
> > .mode = USB_PERIPHERAL,
> > .otg_control = OTG_PHY_CONTROL,
> > + .link_clk_reset = hsusb_link_clk_reset,
> > + .phy_clk_reset = hsusb_phy_clk_reset,
> > };
> >
> > struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
> > diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
> > index 5f933bc..9169ec3 100644
> > --- a/arch/arm/mach-msm/board-qsd8x50.c
> > +++ b/arch/arm/mach-msm/board-qsd8x50.c
> > @@ -31,6 +31,7 @@
> > #include <mach/irqs.h>
> > #include <mach/sirc.h>
> > #include <mach/vreg.h>
> > +#include <mach/clk.h>
> > #include <linux/platform_data/mmc-msm_sdcc.h>
> >
> > #include "devices.h"
> > @@ -81,10 +82,44 @@ static int hsusb_phy_init_seq[] = {
> > -1
> > };
> >
> > +static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
> > +{
> > + int ret;
> > +
> > + if (assert) {
> > + ret = clk_reset(link_clk, CLK_RESET_ASSERT);
> > + if (ret)
> > + pr_err("usb hs_clk assert failed\n");
> > + } else {
> > + ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
> > + if (ret)
> > + pr_err("usb hs_clk deassert failed\n");
> > + }
> > + return ret;
> > +}
> > +
> > +static int hsusb_phy_clk_reset(struct clk *phy_clk)
> > +{
> > + int ret;
> > +
> > + ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
> > + if (ret) {
> > + pr_err("usb phy clk assert failed\n");
> > + return ret;
> > + }
> > + usleep_range(10000, 12000);
> > + ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
> > + if (ret)
> > + pr_err("usb phy clk deassert failed\n");
> > + return ret;
> > +}
> > +
> > static struct msm_otg_platform_data msm_otg_pdata = {
> > .phy_init_seq = hsusb_phy_init_seq,
> > .mode = USB_PERIPHERAL,
> > .otg_control = OTG_PHY_CONTROL,
> > + .link_clk_reset = hsusb_link_clk_reset,
> > + .phy_clk_reset = hsusb_phy_clk_reset,
> > };
> >
> > static struct platform_device *devices[] __initdata = {
> > diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
> > index e9d4cd9..118798d 100644
> > --- a/drivers/usb/phy/phy-msm-usb.c
> > +++ b/drivers/usb/phy/phy-msm-usb.c
> > @@ -40,8 +40,6 @@
> > #include <linux/usb/msm_hsusb_hw.h>
> > #include <linux/regulator/consumer.h>
> >
> > -#include <mach/clk.h>
> > -
> > #define MSM_USB_BASE (motg->regs)
> > #define DRIVER_NAME "msm_otg"
> >
> > @@ -308,33 +306,29 @@ static void ulpi_init(struct msm_otg *motg)
> >
> > static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
> > {
> > - int ret;
> > + int ret = 0;
> > +
> > + if (!motg->pdata->link_clk_reset)
> > + return ret;
> > +
> > + ret = motg->pdata->link_clk_reset(motg->clk, assert);
> > + if (ret)
> > + dev_err(motg->phy.dev, "usb link clk reset failed\n");
> >
> > - if (assert) {
> > - ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
> > - if (ret)
> > - dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
> > - } else {
> > - ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
> > - if (ret)
> > - dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
> > - }
> > return ret;
> > }
> >
> > static int msm_otg_phy_clk_reset(struct msm_otg *motg)
> > {
> > - int ret;
> > + int ret = 0;
> >
> > - ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
> > - if (ret) {
> > - dev_err(motg->phy.dev, "usb phy clk assert failed\n");
> > + if (!motg->pdata->phy_clk_reset)
> > return ret;
> > - }
> > - usleep_range(10000, 12000);
> > - ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
> > +
> > + ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
> > if (ret)
> > - dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
> > + dev_err(motg->phy.dev, "usb phy clk assert failed\n");
>
> seems like you're doing more than *just* fixing the build error. Which
> build error do you get ?

clk_reset() is defined only in mach code which is not available in
multi platform builds. But you are right, probably I have to mention
that some error messages are also changed.

With this change driver will loss ability to reset PHY and LINk
controllers on newer targets, but I don't think it is functional
on them right now (driver resources are not defined on these
boards). I am planing to add reset framework support to driver in
order to support them.

Regards,
Ivan




\
 
 \ /
  Last update: 2013-10-15 09:21    [W:0.100 / U:8.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site