[lkml]   [2013]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [Patch V5] drivers: power: Add support for bq24735 charger
On 10/14/2013 2:21 PM, Stephen Warren wrote:
> On 10/11/2013 03:15 PM, Rhyland Klein wrote:
>> From: Darbha Sriharsha <>
>> Adds support for the bq24735 charger chipset. The bq24735 is a
>> high-efficiency, synchronous battery charger.
>> It allows control of the charging current, input current, and the charger
>> voltage DAC's through SMBus.
> Please CC the DT bindings maintainers on patches that add DT bindings.

Oops, sorry, will do in the future.

>> diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
>> +Optional properties :
>> + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
>> + presence.
> Is that actually a property of the BQ24735 chip itself (i.e. is it an
> output signal from the chip), or part of the board/system?

The gpio itself is actually what the IRQ line is tied to from the
bq24735 -> tegra (in this case). In other words this is a Host GPIO that
is configured as an input and connected to the bq24735.


> Aside from that, the binding looks reasonable to me (although I'm no
> longer a DT bindings maintainer).


 \ /
  Last update: 2013-10-14 20:41    [W:0.133 / U:3.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site